Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Macro-Scopic Spray Characteristic of Homogeneous Degree for the GDI Injector According to Mixture(Gasoline-Diesel) Ratio Using Mie-Scattering Method and the Entropy Analysis

Mie 산란 방법과 엔트로피 해석 방법을 이용한 혼합연료비에 따른 분무 균질도 특성에 관한 연구

  • Published : 2003.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, his technique was applied to a GDI spray in order to investigate the mixture distribution. In addition, the homogeneity degree and diffusion effect according to ambient temperature in the high pressure chamber were analyzed by using an entropy analysis method. From this experiment, we could find that entropy analysis is very effective method for the analysis of mixture formation, and the entropy values increase with the progress of uniformity in diffusion Process. we tried to provide the fundamental data for parameter which effects on the spray macroscopic characteristics with mixture ratio of diesel and gasoline. In addition, the mixture formation was analyzed by using entropy analysis. The entropy analysis is based on the concept of statistical entropy, and it identifies the degree of homogeneity in the fuel concentration. From the entropy analysis results we could find that the direct diffusion phenomena is a dominant factor in the formation of a homogeneous mixture at downstream of GDI spray especially in vaporizing conditions. As to increasing ambient temperature and increasing gasoline rate, the entropy intensity using the statistic thermodynamics method is increased because evaporation rate is higher gasoline than diesel.

Keywords

References

  1. Koji Hiraya, Kazuya Hasegawa, Tomonori Urushihara, Akihiro Iiyama and Teruyuki Itoh, 'A Study on Gasoline Fueled Compression Ignition Engine,' SAE Paper, No. 2002-01-0416
  2. Magnus Sjoberg, Lars-Olof Edling, Torbjorn Eliassen, Lars Magnusson and Hans-Erik Angstrom, 'GDI HCCI: Effects of Injection Timing and Air Swirl on Fuel Stratification, Combustion and Emission Formation,' SAE Paper, No. 2002-01-0106
  3. Shigeo Yamamoto, Takahiro Satou and Motoki Ikuta, 'Feasibility Study of Two-stage Hybrid Combustion in Gasoline Direct Injection Engines,' SAE Paper, No. 2002-01-0113
  4. Craig D. Marriott and Rolf D. Reitz, 'Experimental Investigation of Direct Injection-Gasoline for Premixed Compression Ignited Combustion Phasing Control,' SAE Paper, No. 2002-01-0418
  5. Michael. Shelby, Brad A. 1998, VamDerWege and Someone Hochgreb, 'Early Spray Development in Gasoline Direct-Injected Spark Ignition Engines,' SAE980160
  6. Fu-Quan Zhao, Ming-Chia Lai, 'A Review Mixture Preparation and Combustion Control Strategies for Spark-Ignition Direct-Injection Gasoline Engines,' SAE970627
  7. Zhao, F.-Q., Yoo, J.-H., and Lai, M.-C., 1996, ' Spray Dynamics of High Pressure Fuel Injectors for DI Gasoline Engines,' SAE Technical paper, No. 961925
  8. Toyosei Yamauchi, and Tomoyuki Wakisaka, 1996, 'Computation of the Hollow-Cone Sprays from a High-Pressure Swirl Injector for a Gasoline Direct-Injection SI Engine,' SAE Technical paper, No. 962016
  9. Masahisa Yamakawa, Seiji Isshiki, Takuo Yoshizaki and Keiya Nishida, 2001, 'Measurement of Ambient Air Motion of D.I. Gasoline Spray by LIF-PIV,' COMODIA, pp. 499-504
  10. Ryo Yuyama, Takemi Chikahisa, Kazashige Kikuta and Yukio Hishinuma, 2001,' Entropy Analysis of Control Microscopic Diffusion Phenomena in Diesel Sprays,' COMODIA, pp. 542-550
  11. Lee, C.H., Lee, K.H., Ryu, J.D., Jung, H.Y. and Lee, C.S., 2002, 'An Experimental Study on the Spray Behavior and Mixture Formation in the Early Injection Timing of GDI Injectors Using the Entropy Analysis,' ilass-American 15th Annual Conference on Liguid Atomization and Spray Systems, pp. 52-58