Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Estimation of One-dimensional Beat Fluxes on the Slab in Reheating Furnace by Using Inverse Analysis

역해석을 이용한 가열로 내 소재의 1차원 열유속 추정에 관한 연구

  • 강덕홍 (포항산업과학연구원, 에너지 화성연구팀) ;
  • 곽동성 (한양대학 기계공학과) ;
  • 김우승 (한양대학교 대학원 기계공학과) ;
  • 이용국 (포항산업과학연구원, 에너지 화성연구팀)
  • Published : 2003.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study deals with the use of the conjugate gradient method for the simultaneous estimation of two unknown boundary heat fluxes on the slab in reheating furnace. Temperature measurements by the experiment are used in the inverse analysis. The heat flux estimations for three different cases of measurement locations in the slab are performed: non-skid, skid, and shift-skid zones. The estimated heat fluxes for three cases indicated the three regions having local peak values of heat fluxes. The estimated temperatures at measurement locations were in good agreements with the measured temperatures within 5% relative error.

Keywords

References

  1. Veslocki, T. A., Smith, C. C. and Kelly, C. D., 1986, 'Automatic Slab Heating Control at INLAND'S 80-IN HOT STRIP MILL,' Iron & Steel Engineer, Vol. 63, No. 12, pp. 47~54
  2. Huang, C. H., Ju, T. M. and Tseng, A. A., 1995, The Estimation of Surface Thermal Behavior of the Working Roll in Hot Rolling Process, International Journal of Heat and Mass Transfer, Vol. 38, pp. 1019-1031 https://doi.org/10.1016/0017-9310(94)00218-K
  3. Kwag, D.S., Kim,W.S. and Lee, K.S, 2000, Inverse Problem of Determining the Unknown Wall Heat Flux in a Single Screw Extruder, 4th JSME-KSME Thermal Engineering Conference, Vol. 1, pp. 517-522, Kobe, Japan
  4. Huang, C. H. and Hsiung, T. Y., 1999, An Inverse Design Problem of Estimating Optimal Shape of Cooling Passages in Turbine Blades, International Journal of Heat and Mass Transfer, Vol.42, pp. 4307-4319 https://doi.org/10.1016/S0017-9310(99)00090-3
  5. Hollander, F. and Zuurbier, S. P. A., 1985, 'Accurate Temperature Control of the Reheating Process at Mixed Cold and Hot Charging,' Proceedings of the International Conference on Process Control and Energy Savings in Reheating Furnaces, Vol. 36, No. 6, pp. 1-6
  6. Kang, D.H., Kim, K.H., 1998, 'Improvment of the Mathematical Model for Combustion Control in the Reheating Furnace of Plate-Mill,' RIST Report 98A309
  7. Kang, D.H., Kim, K.H. and Lee Y.K., 2001, 'The Study on the Gas Temperature Set by Calculating the Sensitivity of Slab Temperature in Reheating Furnace,' Trans. of the KSME, Part B, Vol.25, No.8, pp. 1030-1036
  8. Ozisik, M. N., 1993, Heat Conduction, John Wiley & Sons, Inc.
  9. M. J. Colaco and H. R. B. Orlande, 2001, 'Inverse Forced Convection Problem of Simultaneous Estimation of Two boundary Heat Fluxes in Irregularly Shaped Channels,' Num. Heat Transfer, Part A, Vol. 39, pp. 737-760 https://doi.org/10.1080/10407780117384
  10. Alifanov, O. M., 1994, Inverse Heat Transfer Problems, Springer-Verlag
  11. Kim, W. S., Ozisik, M. N., and Choi, E. R., 1999, 'Alternate Application of Regular and Modified Conjugate Gradient Method,' Hybrid Methods in Engineering, Vol. 1, No. 3, pp. 217-234