DOI QR코드

DOI QR Code

Parameter Estimation of Single and Decentralized Control Systems Using Pulse Response Data

  • Cheres, Eduard (Planning Development and Technology Division, The Israel Electric Corp. Ltd.) ;
  • Podshivalov, Lev (Planning Development and Technology Division, The Israel Electric Corp. Ltd.)
  • 발행 : 2003.03.20

초록

The One Pass Method (OPM) previously presented for the identification of single input single output systems is used to estimate the parameters of a Decentralized Control System (DCS). The OPM is a linear and therefore a simple estimation method. All of the calculations are performed in one pass, and no initial parameter guess, iteration, or powerful search methods are required. These features are of interest especially when the parameters of multi input-output model are estimated. The benefits of the OPM are revealed by comparing its results against those of two recently published methods based on pulse testing. The comparison is performed using two databases from the literature. These databases include single and multi input-output process transfer functions and relevant disturbances. The closed loop responses of these processes are roughly captured by the previous methods, whereas the OPM gives much more accurate results. If the parameters of a DCS are estimated, the OPM yields the same results in multi or single structure implementation. This is a novel feature, which indicates that the OPM is a convenient and practice method for the parameter estimation of multivariable DCSs.

키워드

참고문헌

  1. Huang, C.-T.; Chau, C.-J.; Wang, J.-L. J. Chinese Inst. Chem. 1996, 27, 107.
  2. Ham, T. W.; Kim, Y. H. Ind. Eng. Chem. Res. 1998, 37, 482. https://doi.org/10.1021/ie970361w
  3. Ferretti, G.; Maffezzoni, C.; Scattolini, R. Automatica 1996, 449.
  4. Cheres, E.; Eydelzon, A. Proc. of the Eight. IASTED Int. Conf. Modelling Ident. and Contr.; ACTA Press: Calgary, Canada, 1999; p 483.
  5. Schoukens, J.; Pintelon, R. Identification of Linear Systems; Pergamon: Oxford, 1991; p 55.
  6. Luyben, W. L. Process Modeling Simulation, and Control for Chemical Engineers; McGraw-Hill: New York, 1990; p 505.
  7. Cheres, E.; Eydelzon, A. Process Contr. and Quality 1999, 11, 301. https://doi.org/10.1163/156856699750249422
  8. Cheres, E.; Eydelzon, A. Process Contr. and Quality 1999, 11, 307. https://doi.org/10.1163/156856699750249431
  9. Ham, T. W.; Kim, Y. H. J. Chem. Eng. of Japan 1998, 31, 941. https://doi.org/10.1252/jcej.31.941
  10. Rivera, D. E.; Jun, K. S. IEEE Control Systems Magazine 2000, 20, 25.
  11. Grace, A. Optimization Toolbox for Use with MATLAB; The MathWorks Inc.: Natick, U.S.A, 1994; pp 3-16.
  12. Li, W.; Lee, J. H. AIChE J. 1996, 42, 2813. https://doi.org/10.1002/aic.690421012
  13. Lauzi, M. Proc. of the IEMDC '99 1999, 460.
  14. Astrom, K. J. Int. J. of Adaptive Contr. and Signal Processing 1991, 5, 3. https://doi.org/10.1002/acs.4480050103