References
- Koren, Y, 1997, 'Control of Machine Tools,' Journal of Manufacturing Science and Engineering, Vol. 119, pp. 749-753 https://doi.org/10.1115/1.2836820
- Tlusty, J. and Andrew, G.C., 1983, 'Acritical Review of Sensors for Unmanned Machining,' Annals of the ClRP, Vol. 32,No. 2, pp. 563-572 https://doi.org/10.1016/S0007-8506(07)60184-X
- Week. M., 1983, 'Machine Diagnostics in Automated Production,' Journal of Manufacturing Systems, Vol. 2, No.2, pp. 101-106 https://doi.org/10.1016/S0278-6125(83)80023-5
- Meng, Q., Arsccularatnc, J. A. and Mathcw., P., 2000, 'Calculation of Optimum Cutting Conditions for Turning Operations using a Machining Theory,' Int. J. of Machine Tools and Manufacture, Volume 40, Issue 12, , Pages 1709-1733 https://doi.org/10.1016/S0890-6955(00)00026-2
- Arezooa. 8., Ridgwayb, K. and Al-Ahrnaric, A. M. A., 2000, 'Selection of Cutting Tools and Conditions of Machining Operations using an Expert System,' Computers in Industry, Volume 42, Issue 1, Pages 43-58 https://doi.org/10.1016/S0166-3615(99)00051-2
- Datsko, J., 1978, Material Properties and Manufacturing Processes, Jone Wiley & Sons, Inc
- Nair, R .. , Danai, K., and Malkin, S., 1990, 'Turning Process Identification Through Force Transients,' Automation of Manufacturing Processes, The Winter Annual Meeting of thc ASME, Dallaas, Texas, pp. 59-66
- Spiewak, S.A., 1995, 'Acceleration based Indirect Force Measurement in Metal Cutting Processes,' Int. J. Machine Tools Manufacturing., Vol. 35, No. 1, pp. 1-17 https://doi.org/10.1016/0890-6955(95)80005-0
- Shiraish, M. and Aoshima, S., 1997, ' Sensorless Inprocess Measurement of Instantaneous Depth of Cut and Cutting Force in Turning,' Proc. American Control Conf., pp. 155-159
- Stein, J.L. and Wang, C.H., 1990, 'Analysis for Power Monitoring on AC Induction Drive Systems,' Transaction of ASME Journal of Dynamic Systems, Measurement and Control, Vol. 112, pp. 239-248, June https://doi.org/10.1115/1.2896131
- Stein, J.L and Huh, K., 1992, 'A Model-Based Monitor Design For Estimating the Cutting Force In A Lathe,' ASME Winter Annual Conference
- Huh, K., Jung, J. and Lee, K., 1998, 'A Cutting Force Monitoring System based on AC spindle Drive,' Proceedings of the American Control Conference, pp. 3013-3017 https://doi.org/10.1109/ACC.1998.688410
- Pak Changho, Kim Jaeok, Huh Kunsoo, 1999, 'Model-Based Monitoring of the Turning Force ,' Proc. KSMTE, pp. 11-15
- Kim Jaeok, Huh Kunsoo, 2000, 'Turning Force Control Based on the Estimated Cutting Force,' Journal of the KSPE, Vol. 17, No.5, pp. 173-179
- Kalpakjian, Serope, Steven R. Schmid, 2001, Manufacturing Engineering and Technology, 4th Ed. Prentice- Hall
- Li-Xin Wang, 1997, A Course in Fuzzy Systems and Control, Prentice-Hall