Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Measurement of Glass-Silicon Interfacial fracture Toughness and Experimental Evaluation of Anodic Bonding Process based on the Taguchi Method

다구찌 방법에 의한 유리-실리콘 양극접합 계면의 파괴인성치 측정 및 양극접합공정 조건에 따른 접합강도 분석

  • 강태구 (한국과학기술원 디지털나노구동연구단) ;
  • 조영호 (한국과학기술원 디지털나노구동연구단)
  • Published : 2002.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

Anodic bonding process has been quantitatively evaluated based on the Taguchi analysis of the interfacial fracture toughness, measured at the interface of anodically bonded silicon-glass bimorphs. A new test specimen with a pre-inserted blade has been devised for interfacial fracture toughness measurement. A set of 81 different anodic bonding conditions has been generated based on the three different conditions for four different process parameters of bonding load, bonding temperature, anodic voltage and voltage supply time. Taguchi method has been used to reduce the number of experiments required for the bonding strength evaluation, thus obtaining nine independent cases out of the 81 possible combinations. The interfacial fracture toughness has been measured for the nine cases in the range of 0.03∼6.12 J/㎡. Among the four process parameters, the bonding temperature causes the most dominant influence to the bonding strength with the influence factor of 67.7%. The influence factors of other process parameters, such as anodic voltage and voltage supply time, bonding load, are evaluated as 18%, 12% and 2.3%, respectively. The maximum bonding strength of 7.23 J/㎡ has been achieved at the bonding temperature of 460$\^{C}$ with the bonding load of 45gf/㎠, the applied voltage of 600v and the voltage supply time of 25minites.

Keywords

References

  1. Albaugh, K.B. and Cade, P.E., 1988, 'Mechanisms of Anodic Bonding of Silicon to Pyrex,' Tech. Dig. of Solid-State Sensor and Actuator Workshop, pp. 109-110 https://doi.org/10.1109/SOLSEN.1988.26450
  2. Anthony, T.R., 1985, 'Dielectric Isolation of Silicon by Anodic Bonding,' J. Appl. Phys., Vol. 58, No.3, pp. 1240-1247 https://doi.org/10.1063/1.336143
  3. Audet, SA and Edenfeld, K.M., 1997, 'Integrated Sensor Wafer-Level Packaging,' Int. Con. on Solid-State Sensors and Actuators, pp. 287-289 https://doi.org/10.1109/SENSOR.1997.613640
  4. Henmi, H., Shoji, S., Shiji, Y., Yoshimi, K. and Esashi, M., 1994, 'Vacuum Packaging for Microsensors by Glass-Silicon Anodic Bonding,' Sensors and Actuators, A43, pp. 243-248 https://doi.org/10.1016/0924-4247(94)80003-0
  5. Esashi, M., Ura, N. and Matsumoto, Y., 1992, 'Anodic Bonding for Integrated Capacitive Sensors,' Proc. IEEE Workshop on Micro Electro Mechanical Systems, pp. 43-48 https://doi.org/10.1109/MEMSYS.1992.187688
  6. Mack, S., Baumann, H. and Gosele, D., 1997, 'Gas Tightness of Cavities Sealed by Silicon Wafer Bonding,' Proc. IEEE Workshop on Micro Electro Mechanical Systems, pp. 488-493 https://doi.org/10.1109/MEMSYS.1997.581908
  7. Miiller, B. and Stoffel, A., 1991, 'Tensile Strength Characterization of Low-Temperature Fusion-Bonded Silicon Wafers,' J Micromecha. and Microeng., Vol. 1, pp. 161-166 https://doi.org/10.1088/0960-1317/1/3/006
  8. Abe, T., Takei, T., Uchiyama, A., Yoshizawa, K. and Nakazato, Y., 1990, 'Silicon Wafer Bonding Mechanism for Silicon-on-Insulator Structures,' Japanese Journal of Applied Physics, Vol. 29, No. 12, pp. L2311-L2314 https://doi.org/10.1143/JJAP.29.L2311
  9. Maszara, W.P., Goetz, G., Caviglia, A. and McKitterick, J.B., 1988, 'Bonding of Silicon Wafers for Silicon-on-insulator,' J Appl. Phys., Vol. 64, No. 10, pp. 4943-4950 https://doi.org/10.1063/1.342443
  10. 강태구, 조영호, 2001, '기판단위 밀봉 패키징을 위한 내압 동공열의 설계 및 강도 평가,' 대한기계학회논문집 A권, 제25권 제1호, pp. 11-15
  11. Roy, R.K., 1990, A Primer on the Taguchi Method, Van Nostrand Reinhold
  12. Anderson, T.L., 1995, Fracture Mechanics: Fundamentals and Applications, CRC Press
  13. Stengl, R., Tan, T. and Gosele, U., 1989, 'A Model for the Silicon Wafer Bonding Process,' Japanese Journal of Applied Physics, Vol. 28, No. 10, pp. 1735-1741 https://doi.org/10.1143/JJAP.28.1735
  14. Kanda, Y., Matsuda, K., Murayama, C. and Sugaya, J., 1990, 'The Mechanism of Field-assisted Silicon-Glass Bonding,' Sensors and Actuators, Vol. A21-A23, pp. 939-943 https://doi.org/10.1016/0924-4247(90)87064-P