대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제26권12호
  • /
  • Pages.2662-2669
  • /
  • 2002
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

압연강판 접착제 접합부의 환경 접합강도에 미치는 온도 및 침수시간의 영향

Effect of Temperature and Immersion Time on the Environmental Adhesive Strength of Adhesively Bonded Joints of Rolled Steel Sheet

  • 송준희 (전북대학교 부설 공학연구원 공업기술연구센터) ;
  • 이희제 (전북대학교 부설 공학연구원 공업기술연구센터) ;
  • 임재규 (전북대학교 기계공학부 자동차신기술연구소)
  • 발행 : 2002.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently structural applications of adhesive bonding method have been increased extensively in automobile industry. Adhesively-bonded joints which are used in automobile field are exposed to various environmental conditions. In this study, several environmental factors were concerned to evaluate their effects on the adhesive strength such as air temperature, water temperature, exposed time in water. The specimens are exposed for 1, 10 and 100 hours at various air temperatures to evaluate the effects of the air and water temperature on the adhesive strength. It is proved that the adhesive strength decrease with rising the air and water temperature, and the adhesive strength decrease steeply at the higher temperature with increasing the exposure time in water.

키워드

참고문헌

  1. Eric Lawley, 1982, 'A Review of Adhesives in the Automotive Industry Today,' Journal of Adhesion, Vol. 15, pp. 237-246
  2. Bastac, S., 1998, 'Durability of Steel/Polymer Adhesion in an Aqueous Environment,' Int. Journal of Adhesion & Adhesives, Vol. 18, pp. 365-369 https://doi.org/10.1016/S0143-7496(98)00020-7
  3. Wilson, R. G., 1982, 'Practical Applications of Structural Adhesices,' Journal of Adhesion, Vol. 15, pp. 224-225
  4. Dorn, L. and Salem, N., 1999, 'Plastic Adhesive Joints,' Kunststoffe German Plastics, Vol. 83, pp. 19-21
  5. Dorn, L. and Weiping-Lin, 1994, 'Stress and Deformation Analysys fo Single Lap Plastic-Steel Adhesive-Bonded Joints,' Welding and Cutting, Vol. 3, pp. 42-44
  6. Wylde, J. W., 1998, 'Measurement of Adhesive Joint Fracture Properties as a Function of Environmental Degradation,' Int. Journal of Adhesion & Adhesices, Vol. 18, pp. 237-246 https://doi.org/10.1016/S0143-7496(98)00028-1
  7. Armstrong, K. B., 1997, 'Long-Term Durability in Water of Aluminum Alloy Adhesive Joints Bonded with Epoxy adhesives,' Int. Journal of Adhesion & Adhesives, Vol. 17-2, pp. 89-105 https://doi.org/10.1016/S0143-7496(96)00038-3
  8. Li, J. S., Lim, J. K. and Kim, Y. J. 2001, 'Stress Distribution and Strength Evaluation of Adhesive Bonded Single-lap Joints,' The Korean Welding Society, Vol. 19, No 3, pp. 91-96
  9. Lim, J. K., Li, J. S. and Lee, H. J., 1999, 'A Study on the Evaluation of the Environmental Adhesive-Strength for Adhesively Bonded Joints,' Proc. of the 1999 Autumn Annual Meeting of Korean Welding Society, pp. 255-258
  10. Jun-Hee Song and Jae-Kyoo Lim, 2001, 'Bonding Strength in Structural Adhesive Bonded Joint,' METIALS AND MATERIALS International, Vol. 7, No. 5, pp. 467-470 https://doi.org/10.1007/BF03027088
  11. Bascom, W. D., 1970, Journal of Adhesion, Vol. 2, p. 161 https://doi.org/10.1080/0021846708544591
  12. Dodiuk, H., Drori, L. and Miller, J., 1985, 'The Effect of Moisture Content in Epoxy Film Adhesives on Their Performance, II: T-peel and $105{\circ}C$ lap sheat strength,' Journal of Adhesion, Vol. 19
  13. Kinloch, A. J., 1979, 'Adhesion 3,' Elsevier Applied Science, London
  14. Lewis, A. F and Gounder, 1981, Treatise on Adhesion and Adhesices, Vol. 5, Marcel. Dekker, New York
  15. Jurt, R. A., 1988, ASTM STP 981, American Society for Testing and Materials, Philadelphia, PA
  16. 1994, 'ASTM Designation: D 1002-94,' Annual book of ASTM standards, Vol. 15.06, pp. 45-48
  17. 1996, 'ASTM Designation: D 2295-96,' Annual book of ASTM standards, Vol. 15.06, pp. 144-146
  18. Fowkes, F. M., 1967, Adhesion and Adhesives, Vol. 1, Arnold, London
  19. Allen, K. W., 1990, 'Adhesion, 15' Elsevier Applied Science, London, pp. 1-18/226-248
  20. Good, R. J., 1973, 'Recent Advances in Adhesion,' Gordon and Breech, New York
  21. Voikerson, O., 1983, 'Die Nietkraftverteilung in Zug bean Spruchten mit Konstanten Laschenquerschritten,' Lufifahrtforschung, Vol. 15, pp. 41-47
  22. Recent Advances in Adhesion Good, R. J.
  23. Lufifahrtforschung v.15 Die Nietkraftverteilung in Zug bean Spruchten mit Konstanten Laschenquerschritten Voikerson, O.