한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제10권2호
  • /
  • Pages.87-95
  • /
  • 2002
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

TAB 모텔과 수정된 액적 항력 모텔을 이용한 공기 보초 분무에서의 액적 분열에 대한 수치적 연구

Numerical Study an Drop Breakup in Air-Assisted Spray Using the TAB Model with a Modified Drop Drag Model

  • 발행 : 2002.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The aim of this article is to perform the numerical simulation far drop drag and breakup processes in air-assisted sprays using the Taylor analogy breakup (TAB) model with a modified drop drag model, in which a random method is newly used to consider the variation of the drop's frontal area. The predicted results for drop trajectory and Salter mean diameter (SMD) were compared with experimental data and the simulation results using the earlier published models such as TAH model, surface wave instability (Wave) model, and Wave model with original drop drag model. In addition, the effects of the breakup model constant, Ck, on prediction of spray behaviors were discussed. The results shows that the TAB model with the modified drop drag model is in better agreement with experimental data than the other models, indicating the present model is acceptable for predicting the drop breakup process in air-assisted sprays. At higher Weber numbers, the smaller Ck shows the best fitting to experimental data. It should be noted that more elaborated studies is required in order to determine the breakup model constant in the suggested model in the study.

키워드

참고문헌

  1. R. D. Reitz, 'Modeling Atomization Process in High-Pressure Vaporizing Sprays,' Atomisation and Spray Technology, Vol.3, pp.309-337, 1987
  2. K. Y. Huh, E. Lee, J.-Y. Koo, 'Diesel Spray Atomization Model Considering Nozzle Exit Turbulence Conditions,' Atomization and Sprays, Vol.8,pp.453-469,1998 https://doi.org/10.1615/AtomizSpr.v8.i4.60
  3. M. Gavaises, 'Modeling of Diesel Fuel Injection Processes,' Ph.D. Thesis, Imperial Collegeof Science, Technology and Medicine, Departmerit of Mechanical Engineering, University of London, 1997
  4. P. J. O'Rourke, A. A. Amsden, 'The Tab Method for Numerical Calculation of Spray Droplet Breakup,' SAE 872089, 1987
  5. E. A. Ibrahim, H. Q. Yang, A. J. Przekwas, 'Modeling of Spray Droplets Deformation and Breakup,' Journal of Propulsion and Power, Vol.9, Technical Notes, pp.651-654, 1993 https://doi.org/10.2514/3.23672
  6. F. X. Tanner, 'Liquid Jet Atomization and Droplet Breakup Modeling of Non-Evaporating Diesel Fuel Sprays,' SAE 970050, 1997
  7. C. Habchi, D. Verhoeven, C. H. Huu, L. Lambert, J. L. Vanhemelryck, T. Baritaud, Modeling Atomization and Break Up in High-Pressure Diesel Sprays, SAE 970881, 1997
  8. A. B. Liu, D. Mather, R. D. Reitz, 'Modeling the Effects of Drop Drag and Breakup on Fuel Sprays,' SAE 930072, 1993
  9. Z. Liu, R. D. Reitz, 'An Analysis of the Distortion and Breakup Mechanism of High SpeedLiquid Drops,' Int. J. Multiphase Flow, Vol.23,pp.631-650, 1997 https://doi.org/10.1016/S0301-9322(96)00086-9
  10. C. H. Lee, R. D. Reitz, 'Modeling the Effects of Gas Density on the Drop Trajectory and Breakup Size of High-Speed Liquid Drops,' Atomization and Sprays, Vol.9, pp.497-517, 1999 https://doi.org/10.1615/AtomizSpr.v9.i5.40
  11. T. F. Su, M. A. Patterson, R. D. Reitz, P. V. Farrell, 'Experimental and Numerical Studies of High Pressure Multiple Injection Sprays,' SAE 960861, 1996
  12. W. C. Reynolds, 'Modeling of Fluid Motions in Engines and Introductory Overview, in Combustion Modeling in Reciprocating Engines,' ed. J. N. Mattavi and C. A. Amann, Plenum Press, NY, 1980
  13. A. D. Gosman, E. loannides, 'Aspects of Computer Simulation of Liquid-Fuelled Combustors,' AIAA 81-0323, 1981
  14. P. J. O'Rourke, 'Collective Drop Effects on Vaporizing Liquid Sprays,' Ph. D. Thesis, Princeton Univ., 1981
  15. R. I. Issa, 'Solution of the Implicitly Discretized Fluid Flow Equations by Operation-Splitting,' Journal of Comp. Phys., Vol.62, No.1, pp.40-65,1985
  16. R. D. Reitz, F. V. Bracco, 'Mechanism of Breakup of Round Liquid Jets,' the Encyclopedia of Fluid Mechanics, Gulf Publishing, New Jersey, Vol.3, Chapter10. pp.233-249, 1986
  17. C. Beatrice, P. Belardini, C. Bertoli, M. C. Camertti, N. C. Cirillo, 'Fuel Jet Models for Multidimensional Diesel Combustion Calculation: An Update,' SAE 950086, 1995