DOI QR코드

DOI QR Code

평판형광램프의 제작 및 특성

Fabrication and Characteristics of Flat Fluorescent Lamp

  • 발행 : 2002.01.01

초록

본 논문은 LCD의 백라이트로서 고휘도를 내는 간단한 구조의 평판형광램프를 연구하였다. 평판형광램프는 ITO glass와 절연층, 형광층, 전극층, gas층으로 구성된다. 이 램프의 방전개시전압은 주파수가 증가하면 감소하며 이러한 경향으로는 gas층에서 트립된 Xe과 Ar 양이온에 기인된 공간방전효과의 결과이다. 높은 구동 주파수에서 uniform 전압의 감소는 초기 구동에서 발생된 남아있는 공간전하에 기인한다. 결과로서 Xe gas를 사용한 평판형광램프는 구동전압 700[ $V_{rms}$], 주파수 80[kHz]에서 2700[cd/ $m^2$]의 휘도, 균일도 96[%], 최대 효율은 51[m/W]를 얻었다.다.

In this paper, we studied a flat fluorescent lamp with high luminance for LCD backlighting. The lamps have simple structures with ITO glass, insulator layer, phosphor layer, electrode layer and gas gap. The firing voltage was decreased with increasing the frequency. It was considered that this tendency was resulted from the space charge effect due to Xe and Ar positive ions trapped in gas gap. Decrease of uniform voltage at higher drive frequency is due to the remaining space charges which are produced by preceding period. As a result, luminance of 2700[cd/m$^2$] and maximum luminous efficiency of 51[m/W] were obtained with luminance uniformity of 96[%] in operation(700[V$\_$rms/], 80[kHz].

키워드

참고문헌

  1. T. Shiga, K. Igarashi, S. Mikoshiba, S. Shinda, Euro display '96, pp.223-236, 1996
  2. Munisamy Anandam and Douglas Ketchum, IFFF Trans. EIectron Device, pp.1327-1330, vol. 39, 1992 https://doi.org/10.1109/16.137312
  3. K. Hinotani, S. Kishimoto, and K. Terada, Inconf. Rec. 1988 Int Display Research Conf., 1989
  4. Munisamy Anandam and Douglas Ketchum, IEEE Trans. EIectron device, pp.504-510, vol. 30, 1994 https://doi.org/10.1109/16.278502
  5. M. Aradan, D. Ketchum, J. Brain, W.N. Carr, Japan Display '92