• 반도체디스플레이기술학회지
• /
• 제9권1호
• /
• pp.61-66
• /
• 2010

A flat luminaire utilizing 32" flat fluorescent lamp was developed and its optical characteristics were compared with that of the troffer using three T8 regular fluorescent tubes. The optical characteristics of the 32" flat luminaire was similar to that of the troffer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.527-530
• /
• 2001

In this paper, the basic characteristics of flat fluorescent lamp using ultraviolet generate from gas discharge and powder type electrolyminescent display(P-ELD) using a phenomenon of the light emission eaused by the electrical field applied to phosphor are studied. The lamp is a simple structure with insulator layer, phosphor layer, and gas gap. Current(displacement current + discharge current) in flat fluorescent lamp using.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.443-443
• /
• 2008

차세대 LCD back light 시스템으로 Xe plasma plat lamp를 주목하고 있으나 자외선 여기 효율이 떨어져 램프의 휘도 및 광 효율이 낮은 단점을 가지고 있어 이에 따른 개선이 요구되고 있다. MgO는 AC-PDP에서 방전전압의 저하, 방전의 안정성, 동작마진과 같은 특성에 영향을 미치고 있기에 이번 연구 에서는 졸겔법으로 제작한 MgO를 프린팅 방법으로 flat fluorescent lamp에 적용하였다. 실험시 사용한 flat fluorescent lamp의 경우 ITO 전극과 MgO layer 그리고 형광체층을 가진 두 장의 유리판 사이에 Ne-Xe기체를 채운 단순한 구조로 제작하였다. 실험은 압력과 방전거리에 따른 특성을 살펴보았으며, 그 결과 MgO layer 채용한 경우 방전 전압의 감소 및 static margin의 증가를 알 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1577-1579
• /
• 2007

Xe content is one of important factors related to characteristics of the mercury-free flat fluorescent lamp. The electro-optical properties of lamp were investigated for wide range of Xe content in Xe-Ne mixing gas. The maximum luminance of $9,289\;cd/m^2$ and efficacy of 3 lm/W was obtained with Xe 90 %.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1792-1794
• /
• 2001

In this paper, the basic characteristics of flat fluorescent lamp using ultraviolet generated from gas discharge and powder type electro luminescent display using a phenomenon of the light emission caused by the electrical field applied to phosphor are studied. The lamp is a simple structure with insulator layer, phosphor layer, and gas gap. Current(displacement current + discharge current) in flat fluorescent lamp using.

• 전력전자학회논문지
• /
• 제13권5호
• /
• pp.376-382
• /
• 2008

본 논문에서는 LCD(liquid crystal display)에서의 모션 블러 현상을 저감 시킬 수 있는 scanning backlight unit을 면광원을 사용하여 설계 및 제작 하였다. 면광원은 그 구조의 단순함과 BLU(backlight unit) 조립성과 구동의 간편성으로 인해 차세대 BLU의 신규 광원으로 각광 받고 있다. 램프 휘도를 제어하기 위하여 스캔 구동 시 램프의 on-time을 조절하였으며 실험결과 램프 휘도가 선형적으로 변화되고 넓은 범위의 휘도 제어가 가능함을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1519-1521
• /
• 2007

In this work, a coplanar-type plasma flat fluorescent lamp having cross type of electrode was fabricated by screen printing and sealing technique. Cross type of electrode with a dielectric layer were screen-printed on a rear glass plate, and then fired at $550^{\circ}C$. Phosphor was printed on and fired at $450^{\circ}C$. Finally, the lamp was sealed by frit glass at $450^{\circ}C$. The lamp of cross electrode type was studied depending on the electrode gap and the thickness of dielectric layer.

• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.164-172
• /
• 2009

Recently, 2-dimensional flat light sources have been attracting much attention for its use in LCD backlight applications because of its high luminous efficiency and uniformity. A long-gap discharge, mercury-tree flat fluorescent lamp has been developed, which shows a high brightness ($>5000\;cd/m^2$) and high luminous efficacy (60 lm/W). Additionally, it has a wide operating margin and stable driving condition with the aid of an auxiliary electrode. For driving the lamp, a narrow pulse power to maintain the glow discharge state is required. Since there has been no research for this kind of lamp driving, this paper proposes a newly developed short-pulse, high-voltage lamp-driving scheme. The proposed lamp system uses a ballast with a coupled-inductor in order to raise the short pulse voltage up to the lamp ignition level and to obtain energy-recovery action during the glow discharge mode. The operation principles are presented and also the system performances such as the lighting efficiency, spatial and angular uniformities are evaluated by hardware experiments. The results show that the proposed lighting system is a good candidate for the next-generation of LCD backlight systems.

• Journal of the Optical Society of Korea
• /
• 제12권3호
• /
• pp.174-177
• /
• 2008

The luminance properties of FFL(Flat Fluorescent Lamp) backlights have been investigated in detail for the first time. The on-axis luminance gain as well as viewing-angle characteristics on various combinations of optical films were obtained from FFL backlight and compared to the results of conventional CCFL(cold-cathode fluorescent lamps) backlights. It was found that the on-axis luminance gains achieved by using optical films in the FFL backlight were lower than those in the CCFL backlight indicating that the recycling processes occurring between optical films and light sources/reflection sheet are not so effective in the FFL backlight due to the much larger area of, and thus higher absorption probability of the FFL. This result suggests that new optical films should be developed for FFL backlight and other flat-lamp backlight technologies.

• 한국전기전자재료학회논문지
• /
• 제21권12호
• /
• pp.1105-1110
• /
• 2008

In this study, plasma flat fluorescent lamps (FFLs) having two electrode type structures of surface discharge was fabricated by screen printing and were characterized using spectra-radiometer and square pulse power supply. Two types of FFLs (cross-type and line-type electrode structure) were compared with variation of discharge shape and electrode distance.