An Experimental Study on the Performance of a Brazed Plate Heat Exchanger

용접식 판형 열교환기의 성능에 관한 실험적 연구

  • Published : 2002.01.01

Abstract

An experimental study on the performance evaluation of a brazed plate heat exchanger with 10USRT of normal cooling capacity has been carried out. In the present study, a brazed plate heat exchanger was tested at a chevron angle $25^{\circ}$with refrigerant R-22. Refrigerant mass flux was ranged from 23 to 58 kg/$m^2$s in condensation, and from 22 to 53 kg/$m^2$s in evaporation. The heat transfer coefficients and pressure drops are increased as the mass flux increases. The water side pressure drop is increased as the cooling water flow rate and chilled water flow rate increase, while mass flux has little effect. It is also shown that the system performance can be improved by enlarging condensation heat transfer area.

Keywords

References

  1. Air-Conditioning and Refrigeration Engineering v.27 no.3 Application of Plate Heat Exchangers in HVAC System and Air-Conditioning System Ryu, H. S.;Yun, J. S.
  2. ASME J. Heat Transfer v.108 Selecting Optimal Plate Heat Exchanger Surface Patterns Focke, W. W. https://doi.org/10.1115/1.3246880
  3. ASME J. Heat Transfer v.111 Asymptotic Effectiveness-NTU Formulars for Multipass Plate Heat Exchangers Kandlikar, S. G.;Shah, R. K. https://doi.org/10.1115/1.3250679
  4. ASME J. Heat Transfer v.111 Multipass Plate Heat Exchangers -Effectiveness NTU Results and Guidelines for Selecting Pass Arrangements Kandlikar, S. G.;Shah, R. K. https://doi.org/10.1115/1.3250678
  5. Experimental Heat Transfer v.8 Global Performance of a Prototype Brazed Plate Heat Exchanger in a Large Reynolds Number Range Bogaert, R.;Boles, A. https://doi.org/10.1080/08916159508946508
  6. ASME J. Heat Transfer v.121 Evaporation Heat Transfer and Pressure Drop of Refrigerant R-134a in a Plate Heat Exchanger Yan, Y. Y.;Lin, T. F. https://doi.org/10.1115/1.2825924
  7. International Journal of Heat and Mass Transfer v.121 Condensation Heat Transfer and Pressure Drop of Refrigerant R-134a in a Plate Heat Exchanger Yan, Y. Y.;Lio, H. C.;Lin, T. F.
  8. KSME B v.25 no.2 Study on the Heat Transfer and Pressure Drop Characteristics of R-22 in Brazed Plate Heat Exchanger Jeon, C. D.;Kwon, O. K.;Lee, J. H.
  9. Proceedings of KSME B An Experimental Study of Condensation in Plate Heat Exchangers with R-410a Byun, J. H.;Lee, K. J.
  10. Chemical Engineering v.5 Where and How to Use Plate Heat Exchanger Marriott, J.