A Study of Insulation Design of a Gas Transformer Using Extra Turns.)

여유턴 방식에 의한 가스변압기의 절연 설계에 관한 연구

  • 허우행 ((주)효성 중공업연구소 창원분소) ;
  • 하영식 ((주)효성 중공업연구소 창원분소) ;
  • 홍정표 (창원대 공대 전기공학과) ;
  • 김규탁 (창원대 공대 전기공학과)
  • Published : 2001.03.01

Abstract

This paper deals with the electrical insulation design of a gas insulated power transformer based on extra turns method satisfying the impulse test performed in the worst condition. The calculation of electrical strength in insulation structure was done by 2D finite element method. The gas insulated power transformer was manufactured by selecting the optimum arrangement among design results. the validity of the design result is verified by the impulse test of manufactured machine.

Keywords

References

  1. Michael A. Franchek, 'Understanding high voltage insulation technology the subsystem at the heart of today's power transformer,' EHV-Weidmann pp. 10-17, 1994
  2. J.Keith Nelson, 'An assessment of the physical basis for the application of dielectric design criteria for transformers', IEEE Transactions on electrical insulation, vol. 24, no. 5, pp. 835-845, 1989 https://doi.org/10.1109/14.42161
  3. 허우행, 하영식, 홍정표, 김규탁, '가스변압기에서 권선의 섹션에 대한 절연내력연구', 대한전기학회 논문지, vol. 49B, no. 3, pp. 155-156, 2000
  4. 서길수, '$SF_6$ 가스 중 V-t절연파괴특성', 대한전기학회 창립50주년 하계학술 대회논문집, pp. 1771-1772, 1997
  5. 한전구매시방서, '154kV 가스절연변압기', pp. 13-15, 1998
  6. ANSI Standard C57.12.91, 'IEEE test code for dry-type distribution and Power Transformer', pp. 27-31, IEEE, 1980
  7. 이복희, '高電壓 大電流 工學', 청운각, pp.45-65, 1997
  8. EPRI final report RP-930-1, 'Gas-Vapor project', pp. 4-1-26, 1979
  9. A. Inui, 'Dielectric Characteristics of Static Shield for Coil-end of Gas-insulated Transformer', IEEE Trans. on Electrical Insulation, vol. 27, no. 3, pp. 572-577, 1992 https://doi.org/10.1109/14.142721
  10. 김재호, 'SF6 GIS용 스페이스 표면에서의 파티클에 의한 절연파괴 특성연구', 94 대한전기학회 하계학술대회논문집, pp. 1536-1539, 1994
  11. H.P. Moser, 'Transformer board II' EHV-Weidmann, pp. 20-22, 1987