누설전류 모니터링에 의한 옥외용 실리콘 고무의 열화 특성 평가

The Evaluation of Degradation Characteristics of Silicone Rubber for Outdoor by Leakage Current Monitoring

  • 김정호 (성균관대 전기전자및컴퓨터공학부) ;
  • 송우창 (성균관대 전기전자및컴퓨터공학부) ;
  • 조한구 (한국전기연구원 신소재응용연구그룹) ;
  • 박용관 (성균관대 전기전자및컴퓨터공학부)
  • 발행 : 2001.02.01

초록

The degradation process of silicone rubber was investigated by leakage current monitoring in Inclined-Plane method. DAS (Data Acquisition System) with 12-bit, 8-channel A/D converter was prepared. Average current, cumulative charge, current waveform and the number of peak pulses were measured on-line. And, FFT (Fast Fourier Transform) analysis was performed with stored current waveform. Besides, maximum erosion depth was measured in order to use as the indicator of the degradation process. So, the results of leakage current components and maximum erosion depth measurements were compared to find one or more components which have trends of changing similarly to that of erosion process. The result suggests that the ratio of peak current to r.m.s. current, harmonic contents and the number of peak pulses are well corresponding with the degradation process.

키워드

참고문헌

  1. R. S. Gorur, 'Status Assessment of Composite Insulators For Outdoor HV Applications', Proc. of 5th ICPADM, Vol. 1, pp. 35-38, 1997 https://doi.org/10.1109/ICPADM.1997.617521
  2. G. G. Karady, H. M. Schneider, F. A. Rizk, 'Review of Cigre and IEEE Research into Pollution Performance of Nonceramic Insulators : Field Aging Effects and Laboratory Test Techniques', paper 33-103, Cigre, 1994
  3. 'Test Methods for Evaluating Resistance to Tracking and Erosion of Electrical Insulating Materials Used Under Severe Ambient Conditions', IEC publ. 587, 2nd edition, 1984
  4. 유영식, 김정호, 서광석, 조한구, 박용관, '경사평면법에 의한 실리콘 고무 침식의 진전과정과 누설전류 변화와의 상관성에 대한 연구', 전기전자재료학회논문지, Vol. 12, No. 11, pp. 1052-1063, 1999
  5. A. E. Dickson and J. P. Reynders, 'The Effect of Corona on the Surface Properties and Chemical Composition of Silicone Rubber Insulators', 9th Int. Symp. on High Voltage Eng., Graz, paper No. 3231, 1995
  6. R. S. Gorur et al., 'Aging in Silicone Rubber Used for Outdoor Insulation', IEEE Trans. on Power Delivery, Vol.7[2], 1992, pp.525-532 https://doi.org/10.1109/61.127045
  7. A. E. Vlastos and E. M. Sherif, 'Experience from Insulators with Silicone Rubber Sheds and Shed Coatings', IEEE Trans. on Power Delivery, Paper Number 89 WM 121-5 PWRD, 1989 https://doi.org/10.1109/61.103698
  8. R. S. Gorur, E. A. Cherney, R. Hackam and T. Orbeck, 'The Electrical Performance of Polymeric Insulating Materials Under Accelerated Aging in a Fog Chamber', IEEE Trans. on Power Delivery, pp. 1157-1163, 1988 https://doi.org/10.1109/61.193898
  9. D. C. Jolly, 'A Quantitative Method for Determining the Resistance of Polymers to Surface Discharge', IEEE Trans. on Electrical Insulation, Vol. EI -17, No.4, pp, 293-299, 1982 https://doi.org/10.1109/TEI.1982.298497
  10. 김정호, '가속열화에 의한 실리콘 복합 절연물의 열화 특성 평가 기법에 관한 연구', 박사학위 논문, 2000년 12월
  11. T. W. Dakin, G. A. Mullen, T. E. Chenoweth, 'Outdoor Insulator Surface Conductance and Surface Arcing', Proc. 11th IEEE - NEMA Electrical Electronics Insulation Conference, Chicago, p. 157-161, 1973
  12. R. S. Gorur, J. Montesinos, L. Varadadesikan, S. Simons and M. Shah, 'A Laboratory Test for Tracking and Erosion Resistance of HV Outdoor Insulation, IEEE Trans on Dielectrics and Electrical Insulation, Vol. 4, No.6, pp. 767-774, 1997 https://doi.org/10.1109/94.654696