Characteristics of Spatter Generation in the Short Circuit Transfer Region of $CO_2$ Arc Welding

$CO_2$ 용접의 단락이행영역에 있어서 스패터 발생특성

  • 안영호 (POSCO 기술연구소 후판선재연구그룹 용접연구팀) ;
  • 이종봉 (POSCO 기술연구소 후판선재연구그룹 용접연구팀) ;
  • 최원규 (POSCO 기술연구소 후판선재연구그룹 용접연구팀)
  • Published : 2001.12.01

Abstract

The characteristics of spatter generation in the short circuit transfer region of $CO_2$ welding was investigated. Spatteriing phenomena could be classified into three types : Type I generated due to the abrupt increase of arc voltage in arcing duration. Type II by the gas ejection from molten metal and Type III generated by the arc instability at the moment of arc re-ignition just after short circuiting. Main observed types were dependent on the chemical composition of welding wires. The case of YCW12 wires was mainly composed of spatters generated by Type l and Type II, while most, spatters in YCW11 wires were generated by Type II and Type III.

Keywords

References

  1. 溶接技術 v.32 no.2 炭酸ガスア-ク溶接におけるスパツタにつぃて 木村乾男;橋口淸住
  2. 溶接ア-ク現象 安藤弘平;長谷川光雄
  3. 溶接學會論文集 v.15 no.3 炭酸ガスパルスア-ク溶接法におけるスパツタ低減に關する檢討 伊藤崇明;輿石房樹;佐藤正晴;菅 哲男;牛尾誠夫
  4. 溶接學會誌 v.59 no.2 スパツタはどこ防止できるか?(1)溶接電源ガらのアプロ-チ 三田常夫
  5. 溶接學會論文集 v.1 no.2 炭酸ガスア-ク溶接におけるスパツタの發生 荒井敏夫;山田忠昭;菅 哲男
  6. 대한용접학회지 v.14 no.5 CO₂용접시 스패터발생에 미치는 Ti의영향 안영호;이종봉;방국수;엄동석
  7. 대한용접학회지 v.12 no.4 GMAW용적이행현상에 미치는 Ca의 영향 안영호;방국수;이종봉;장래웅
  8. Effect of Titanium in Steel Electrode Wire for CO₂ Arc Welding on the usability and Mechanical Properties of Weld Metal I.Masumoto;A.Sekiguchi;S.Kawasaki