한국해양공학회지 (Journal of Ocean Engineering and Technology)

  • 제15권2호
  • /
  • Pages.124-129
  • /
  • 2001
  • /
  • 1225-0767(pISSN)
  • /
  • 2287-6715(eISSN)
한국해양공학회 (Korean Society of Ocean Engineers)
권호 표지

금속표면에 폴리우레탄코팅한 소재의 코팅조건 변화에 따른 굽힘강도 특성

Characteristics of Bending Strength on Coating Condition of Metal Surface Polyurethan Coating Material

  • 이강길 (동명대 기계자동화계열)
  • 발행 : 2001.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The research on anticorrosive of valve for ship, waterworks, and drainage system is very important. The purpose of this paper is to develop the metal/polyurethan adhesive technique at insider of the value to prevent corrosion in the value. It is performed to the bending strength test by using metal /polyurethan in the metals (SB41, Al6061). It is investigated to the effects of bending strength on curing temperature, preheating time and curing time, and to the fracture mechanism of metal/polyurethan adhensived specimen. As a results, we find that the bending strength is the highest at curing temperature of 11$0^{\circ}C$ and the curing time is 60 minutes in metal/polyurethan adhesive specimen.

키워드

참고문헌

  1. 대한기계학회 논문집 v.17 no.10 Glass/Epoxy 복합재료의 피로강도 평가 및 피로수명예측 김정규;김도식
  2. 대한기계학회 논문집 v.18 no.6 원형 이중겹치기 접착조인트의 해석해에 대한 연구 이수정;이대길
  3. 대한기계학회 논문집 v.15 no.1 탄소섬유강화 복합적층판의 피로특성 이창수;황봉윤;한경섭;윤병일
  4. 대한기계학회 논문집 v.17 no.4 접착이음의 강도평가(1) 정남용
  5. 한국해양공학회지 v.10 no.4 A17075/CFRP 하이브리드 복합재료의 피로수명에 대한 연구 윤한기;김연겸;박준수;이경봉
  6. 한국해양공학회지 v.11 no.4 A16061/AFRP 하이브리드 복합재료의 강도특성에 미치는 내후성 영향 윤한기;김연겸;차영준
  7. Fiber Composite Hybrid Materials Handcix, N. L.
  8. Key Engineering Materials v.183-187 Effects of Heat Treatment on Bending Strength of Aluminum Alloy Matrix Composites Reinforced Aluminum Borate Whisker Huh, S. C.;Yoon, H. K.;Park, K. H.;Lee, S. P.
  9. Inte, J. of Ocean Engineering and Technology v.3 no.1 Impact Fracture and Shear Strength Characteristics on Interfacial Reaction Layer of Nb/MoSi2 Laminate Composites Lee, S. P.;Yoon, H. K.;Park, W. J.
  10. DS10-2026J, SIB/10/85 Elastomer Products for Additional Information Lord Corporation Load
  11. Composite Materials in Aircraft Structures-Longman Scientific & Technainal Middleton, D. H.
  12. Eng. Fracture Mechanics v.19 Flight simulation Behavior Aramid Reintorced Aluminum Laminated (ARALL) Marrissen, R.
  13. Key Engineering Materials v.183-187 Optimization of Molding Cure Conditaion on Al 7075/CFRP Sandwich Composite by the Taguschi Method Yoon, H. K.;Lee, S. H.;An, W. K.