Experiments on Condensation Heat Transfer and Pressure Drop in Plate Heat Exchangers with Different Chevron Angles

판형 열교환기의 세브론각에 따른 응축열전달 및 압력강하 실험

  • 김윤호 (고려대학교 기계공학과 대학원) ;
  • 한동혁 (고려대학교 기계공학과 대학원) ;
  • 이규정 (고려대학교 기계공학과)
  • Published : 2001.11.01

Abstract

Experiments on the condensation heat transfer and pressure drop in the brazed type plate heat exchangers are performed with refrigerants R410A/R22. To investigate the geometric effect, plate heat exchangers with the same pitch and height but different $45^{\circ},\;35^{\circ}and\;20^{\circ}$ chevron angles are used. Varying the mass flux of refrigerant (13~34 kg/$m^2$), the condensing temperatures ($20^{\circ}C\;and\;30^{\circ}C$) and the vapor quality (from 0.9 to 0.15) at the same constant heat flux ($5kW/m^2$), the condensation heat transfer coefficients and pressure drops are measured. The heat transfer coefficients decrease slightly with increasing the condensing temperature at a given mass flux in all plate heat exchangers. The pressure drop increases with increasing the mass flux and the quality and decreasing the condensing temperature and the chevron angle.

Keywords

References

  1. The Chemical Engineer no.285 Plate heat exchanger design and recent development Clark,D.F.
  2. Int. Journal of Heat and Mass Transfer v.42 Condensation heat transfer and pressure drop of refrigerant R134A in a plate heat exchanger Yan,Y.Y.;Lio,H.C.;Lin,T.F.
  3. ASME Journal of Heat Transfer v.121 Evaporation heat transfer and pressure drop of refrigerant R134A in a plate heat exchanger Yan,Y.Y.;Lin,T.F.
  4. SAREC An experimental study on evaporation heat transfer characteristics and pressure drop in plate heat exchanger Kim, Y. S.;Lee, J. H.
  5. An experimental study on heat transfer characteristics and pressure drop in plate heat exchanger With R404A Kwon,O.K.;Kang,J.S.;Lee,J.H.
  6. Mech. Eng. v.75 no.1 Describing uncertainties in single-sample experiments Kline, S. J.;McClintock, F. A.
  7. Int. J. Multiphase Flow v.11 no.6 Two-Phase Flow Pattrns and Void Fractions in Downward Flow, Part 1:Steady-State Flow Patterns Crawford,T.J.;Weinberger,C.B.;Weisman,J.
  8. ASHRAE v.79 Forced Convection Condensation inside tube: A heat transfer equation for condenser design Traviss, D. P.;Rohsenow, W. M.;Baron, A. B.
  9. JSME v.60 Condensation of R22,R134A,R123 in a Horizontal Smooth Tube Haraguchi,H.;Koyama,S.;Fujti,T.
  10. ASHRAE, No. 2247 Local Heat Transfer Coefficients during Annular Flow Condensation Azer, N. Z.;Abis, L. V.;Soliman, H. M.