A Submode Selection Method for Advanced Intra Coding in H.263

H.263 Advanced Intra Coding 모드 선택 방법

  • 박운기 (성균관대학교 전기전자 및 컴퓨터공학부) ;
  • 이상희 ((주)임프레스 정보통신) ;
  • 전병우 (성균관대학교 전기전자 및 컴퓨터공학부)
  • Published : 2001.09.01

Abstract

The Advanced Intra Coding(AIC) mode included in the H.263+ which is for video ceding at low bit rates, selects one prediction direction of DCT coefficients among three directions for every intra macroblock. Based ()n the selected direction, It uses a different DCT scanning order, quantization scheme, and VLC table. The use of the AIC mode brings higher compression ratio and improved PSNR than the H.263 baseline. This paper proposes a simplified submode selection method for a direction of the DCT coefficient prediction for advanced ultra coding in H.263. Compared to the conventional method the proposed simplified method can achieve a similar coding Performance at computational complexity reduced to 1/7 and with much less memory requirement. The proposed method will be useful in implementing a simplified H.263 system.

저전송률 영상통신을 위한 H.263+에 포함된 Advanced Intra Coding(AIC) 모드는 인트라매크로블록 별로 DCT 계수의 예측을 위한 세가지 예측 방향 중 하나를 선택한 후, 선택된 예측 방향에 따라 DCT 계수 주사 방향과 양자화 방법, 그리고 VLC 테이블을 달리 적용한다. 이 방법을 비디오 압축에 적용하면 기존의 H.263 기본 부호화 방법에 비해 더 높은 압축율과 객관적 화질의 향상을 얻을 수 있다. 본 논문은 ITU-T의 H.263+에서 제안하는 Advanced Intra Coding 모드를 사용할 때 필요한 DCT 계수의 예측 방향 선택을 위한 간략화된 방법을 제안한다. 기존의 방법과 비교하여 부호화 성능이 비슷하면서, 계산량이 약 1/7로 간단하고 메모리도 절약할 수 있다.

Keywords