한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제18권10호
  • /
  • Pages.200-207
  • /
  • 2001
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

드릴가공시 버 형성에 관한 연구

Study on Mechanism of Burr Formation in Drilling

  • 발행 : 2001.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Burrs farmed in drilling are classified into three types, no burr, burrs with cap, teared burr. To control burr size in drilling, the second type burrs with cap are to be formed because it is small and uniform. It is necessary to understand the mechanism of cap formation to derive the burr formation into second type burr with cap. In several materials. second type burrs are formed in drilling by changing cutting conditions. It is observed that cap is formed as a result of the plastic deformation along the outside of exit hope. According to the tension behavior of the material in concentrated region between hole and drill outside edge, the geometry of burr with cap is determined. Simplified 2D FEM analysis shows good prediction for burr formation.

키워드

참고문헌

  1. S. L. Ko, D. Dornfeld, 'A Study on Burr Formation Mechanism,' Trans. ASME, J. Eng. for Materials and Technology, Vol.113, pp. 75-87, 1991.1
  2. S. L. Ko, D. Dornfeld. 'Analysis of fracture in at the exit stage of metal cutting,' J. Material Process. Technology, Vol. 58, pp. 189-200, 1996 https://doi.org/10.1016/0924-0136(95)02124-8
  3. L. K. Gillespie, P. K. Blotter, 'The Formation and Properties of Machining Burrs,' Trans. ASME, J. Eng., for Industry, pp. 64-74, 1976
  4. T. Miyake, A.Yamamoto, K.Kitajima, Y.Yanaka and K.Takazawa, 'Syudy on mechanism of Burr Formation in Drilling-Deformation of Material during Burr Formation,' JSPE-57-03, Vol. 3, pp. 87-92, 1991
  5. 고성림, 전근배, 이징구, '새로운 개념 드릴에 의한 구멍 가공시 버 형성에 관한 연구,' 한국 정밀 공학회 제17권 제3호, pp. 114-121, 2000
  6. M.Hashimura, K.Ueda, D.A.Dornfeld, K.Manabe, 'Analysis of Three Dimensionnal Burr Formation in oblique Cutting,' CIRP, 44/1, pp. 27-30, 1995 https://doi.org/10.1016/S0007-8506(07)62268-9
  7. A.J.Pekelharing, 'The exit angle failure in interrupted cutting,' CIRP, Vol. 27, No. 1, pp. 5-10, 1978
  8. Iwata, K, Ueda, K, Ikuda, K., 'Syudy of mechanism of Burr Formation in cutting based on direct SEM observation,' JSPE, Vol. 48, No.4, pp. 510-515, 1982
  9. 고대철, 고성림, '유한요소법을 이용한 버 형성 예측 모듈의 개발,' 한국정밀공학회, 제17권 제10호, pp. 163-170, 2000