Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Dynamic Interfacial Crack in Bonded Anisotropic Strip Under Out-of-Plane Deformation

면외변형하의 이방성 띠판에 대한 동적계면균열

  • Published : 2001.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

A semi-infinite interfacial crack propagated with constant velocity in two bonded anisotropic strips under out-of-plane clamped displacements is analyzed. Using Fourier integral transform the problem is formulated and the Wiener-Hopf equation is derived. By solving this equation the asymptotic stress and displacement fields near the crack tip are obtained, where the results get more general expressions applicable not only to isotropic/orthotropic materials but also to the extent of the anisotropic material having one plane of elastic symmetry for the interfacial crack. The dynamic stress intensity factor is obtained as a closed form, which is decreased as the velocity of crack propagation increases. The critical velocity where the stress intensity factor comes to zero is obtained, which agrees with the lower value between the critical values of parallel crack merged in the material 1 and 2 adjacent to the interface. Using the near tip fields of stresses and displacements, the dynamic energy release rate is also obtained as a form of the stress intensiy factor.

Keywords

References

  1. Sih, G.C., 1977, Elastodynamic Crack Problems, Mechanics of Fracture, Noordhoff International Publishing, Leyden, Vol. 4
  2. Freund, L. B., 1990, Dynamic Fracture Mechanics, Cambridge University Press
  3. Kousiounelos,P.N., J.H.Williams, 1982, 'Dynamic Fracture of Unidirectional Graphite Fiber Composite Strips,' Int. Journ.of Fracture, Vol. 20, pp. 47-63 https://doi.org/10.1007/BF00942164
  4. Nilsson, F., 1972, 'Dynamic Stress-Intensity Factors for Finite Strip Problems,' Int. Journ.of Fracture, Vol. 8, pp. 403-411 https://doi.org/10.1007/BF00191102
  5. 백운철, 황재석, 2000, '이방성비가 큰 직교이방성체의 반무한 균열에 대한 동적응력확대계수에 관한 연구,' 대한기계논문집(A), 제24권 제6호, pp. 1557-1564
  6. 백운철, 황재석, 2000, '이방성비가 큰 직교이방성체의 반무한 균열에 대한 동적응력확대계수에 관한 연구,' 대한기계논문집(A), 제24권 제6호, pp. 1557-1564
  7. 최낙삼, A.J. Kinloch, 1999, '복합적층판의 층간파괴에 미치는 충격하중 속도의 효과,' 대한기계논문집(A), 제23권, 제11호, pp. 1886-1895
  8. Lee,O.K., J.C.Park, and G.H. Kim, 2000, 'Dynamic Mixed Mode Crack Propagation Behavior of Structural Bonded Joint,' KSME International Journal, Vol. 14, No.7, pp. 752-763
  9. Atkinson,C., 1977, 'Dynamic Crack Problems in Dissimilar Media,' in Mechanics of Fracture, Vol. 4., Elastodynamic Crack Problems, ed. by G.C. Sih, pp. 213-248
  10. Chiang, C. R.,1989, 'Mode III Interface Crack Propagation,' Engng Frac. Mech., Vol. 32, pp. 545-550 https://doi.org/10.1016/0013-7944(89)90188-4
  11. Huang, B., 1995, 'Fundamental Formulas of Dynamic Stress Intensity Factors of Mode III for a Propagating Crack in a Strip,' Engng Frac. Mech., Vol. 50, pp. 61-64 https://doi.org/10.1016/0013-7944(94)00142-5
  12. 이광호, 황재석, 최상인, 유재용, 1996, '등방성체와 직교이방성체의 접합계면에 내재된 동적모드 III 균열의 등속전파,' 대한기계논문집(A), 제20권 제12호, pp. 3828-3837
  13. 이광호, 황재석, 1999, 동적모드 III 하중상태하에서 등방성체와 직교이방성체의 접합계면을 따라 등속으로 전파하는 균열의 응력확대계수 $K_{IIl}$ ,' 대한기계논문집(A), 제23권 제10호, pp. 1788-1796
  14. 박재완, 권용수, 정재택, 최성렬, 1997, '상이한 직교이방성 띠판에 대한 면외변형 하의 반무한 등속 평행균열에서의 응력확대계수,' 대한기계학회논문집(A), 제21권 제3호, pp. 447 - 456
  15. 박재완, 김남훈, 최성렬, 2000, '두 이방성 띠판에 내재된 면외변형하의 등속평행균열,' 대한기계학회논문집(A), 제24권 제2호, pp. 496-505
  16. 권종호,권순만,신정우,이강용, 2000, '전기절연균열을 갖는 압전 세라믹 스트립의 세기 계수 결정,' 대한기계학회논문집(A), 제24권 제6호, pp. 1601-1607
  17. Sih, G.C., and Chen, E.P., 1981, Cracks in Composite Materials, Mechanics of Fracture, Vol.6, Martinus Nijhoff, Hauge
  18. Carrier, G.F., Krook, M. and Pearson, P.E., 1966, Functions of a Complex Variables, McGraw-Hill, New York
  19. Noble, B., 1958, Methods Based on the Wiener-Hopf Technique, Pergamon Press, London
  20. Nishioka, T. and Atluri,N., 1983, 'Path -Independent Integrals, Energy Release Rates, and General Solutions of Near-Tip Fields in Mixed-Mode Dynamic Fracture Mechanics,' Engng. Frac. Mech., Vol. 18, pp. 1-22 https://doi.org/10.1016/0013-7944(83)90091-7