References
- 허훈, 이형욱, 김세호 1999, 공기스프링 FEM 해석기법 개발, 대원강업(주) 수탁연구과제보고서
- Morton, J. E., 1987, Rubber Technology, 3rd Ed., Van Nostrand Reinhold, New York
- Gent, A. N, and Thomas, A. G., 1974, 'Force-Deflection Relations for a Model Air Spring,' Rubber Chemistry and Technology, Vol. 47, pp. 384-395
- Agnew, B., 1991, 'A Note on the Design of Air Springs,' Proc. Instn. Mech. Engrs., Vol. 205, pp. 207-209
- Boros, A., Kovacs, F. and Lengyel, K., 1991, 'Modeling of Axial-Symmetric Fiber-Reinforced Rubber Membranes Loaded by Inner Pressure. Computer Simulation of Air-Springs,' International Rubber Conference(IKT/IRC 91), pp. 487-489
- Mabann, C., 1995, 'FE-Berechnungen an Cord-Gummi Verbundwerkstoffen zur Ermittung von Ermudungsmechanismen in Luftfedern,' Kautschuk Gummi Kunststorfe, Vol. 48, pp. 423-429
- Hibbit, Karsson and Scornson Inc., 1996, ABAQUS/Standard Manual
- 이형욱, 김세호, 허훈, 김진영, 정수교, 1999, '다이아프램형 공기 스프링의 유한 요소 해석,' 대한기계학회 논문집, 제 23 권, 제 9 호, pp. 1569-1576
- 백종균, 1994, '대체 변형률장에 의한 효율적인 4 절점 셸 유한요소의 개발,' 한국과학기술원 박사 논문
- Simo; J. C. and Fox, D. D., 1989, 'On a Stress Resultant Geometrically Exact Shell Model- Part I: Formulation and Optimal Parametrization,' Comput Methods Appl. Mech. Engrg., Vol. 72, pp. 267-304 https://doi.org/10.1016/0045-7825(89)90002-9
- Ahmad, S., Irons, B. M. and Zienkiewicz, O. C., 1970, 'Analysis of Thick and Thin Shell Structures by curved Finite Elements,' Int. J. Numer. Meth. Engng., Vol. 2, pp. 419-451 https://doi.org/10.1002/nme.1620020310
- Hughes, T. J. R., Cohen, M. and Haroun, M., 1979, 'Reduced and Selective Integration Techniques in the Finite Element Analysis of Plates,' Nuclear Engineering and Design, Vol. 46, pp. 203-222 https://doi.org/10.1016/0029-5493(78)90184-X
- Belytschko, T., Lin, J. I. and Tsay, C. S., 1984, 'Explicit Algorithms for the Nonlinear Dynamics of Shells,' Comput. Methods Appl. Mech. Engrg., Vo. 42, pp. 225-251 https://doi.org/10.1016/0045-7825(84)90026-4
- Belytschko, T. and Leviathan, I., 1994, 'Physical Stabilization of the 4-Node Shell Element with One Point Quadrature,' Comput. Methods Appl. Mech. Engrg., Vol. 113, pp. 321-350 https://doi.org/10.1016/0045-7825(94)90052-3
- Hughes, T. J. R. and Liu, W. K., 1981, 'Nonlinear Finite-Element Analysis of Shells; Part Ⅰ: Three-Dimensional Shells,' Int. J. Numer. Meth. Engng., Vol. 26, pp. 331-362
- Liu, W. K., Law, E. S., Lam, D. and Belytschko, T., 1986, 'Resultant-Stress Degenerated-Shell Element,' Comput. Methods Appl. Mech. Engrg., Vol. 55, pp. 259-300 https://doi.org/10.1016/0045-7825(86)90056-3
- Allman, D. J., 1988, 'A Quadrilateral Finite Element Including Vertex Rotations for Plane Elasticity Problems,' Int. J. Numer. Meth. Engng., Vol. 26, pp. 717-739 https://doi.org/10.1002/nme.1620260314
- Cook, R. D., 1994, 'Four-Node 'Flat' Shell Element: Drilling Degrees of Freedom, Membrane - Bending Coupled, Warped Geometry and Behavior,' Comput. Struct., Vol. 35, pp. 621-641 https://doi.org/10.1016/0045-7949(94)90025-6
- Hughes, T. J. R. and Brezzi, F., 1989, 'On Drilling Degrees of Freedom,' Comput. Methods Appl. Mech. Engrg., Vol. 72, pp. 105-121 https://doi.org/10.1016/0045-7825(89)90124-2
- Zhu, Y. and Zacharia, T., 1996, 'A New One-Point Quadrature, Quadrilateral Shell Element with Drilling Degrees of Freedom,' Comput. Methods Appl. Mech. Engrg., Vol. 136, pp. 165-203 https://doi.org/10.1016/0045-7825(96)01059-6
- Panda, S. and Natarajan, R., 1981, 'Analysis of Laminated Composite Shell Structures by Finite Element Method,' Comput. & Struct., Vol. 14, pp. 225-230 https://doi.org/10.1016/0045-7949(81)90008-0
- Tsai, S. W. and Hahn, H. T. 1980, Introduction to Composite Materials. Techomic Publishing Co., Inc.