한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제18권2호
  • /
  • Pages.102-110
  • /
  • 2001
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

반도체 칩 캡슐화 성형 공정에 있어서 와이어 스윕 및 패들 변형에 관한 연구

A Study of Wire Sweep, Pre-conditioning and Paddle Shift during Encapsulation of Semiconductor Chips

  • 한세진 (미국 코넬대학교 기계항공 공학부) ;
  • 허용정 (한국기술대학교 메카트로닉스 공학부) ;
  • 이성철 (인하공업전문대학 기계과)
  • 발행 : 2001.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, methods to analyze wire sweep and paddle shift during the semiconductor ship-encapsulation process have been studied. The analysis of wire sweep includes flow-field analysis in a complicated geometry, drag-force calculation for given flow of fluid, and wire-deformation calculation for given loads. The paddle-shift analysis is used to analyze the deformation of the paddle due to the pressure difference in two cavities. the analysis is done using either analytical solutions or numerical simulation. The analytical solution is used for rough but fast calculation of wire sweep. The numerical solution is used for more accurate calculation of wire-sweep. The numerical results of wire sweep show good agreements with the experimental ones.

키워드

참고문헌

  1. Manzione, L.T., Plastic Packaging of Microelectronic Devices, Van Nostrand Reinhold, New York, 1990
  2. Reusch, R.K., 'Wire Sweep in Small Outline Package,' Semiconductor Int., pp. 139-145, 1987
  3. Manzione, L.T., 'Packaging of Microelectronic Devices,' SPE Antec Paper, 1983
  4. Nguyen, L.T., Danker, A., Santhiran, N. and Shervin, C. R., 'Flow Modeling of Wire Sweep during Molding of Integrated Circuits,' ASME Winter Annual Meeting, p. 27, 1992
  5. Han, S., A Study on Plastic Encapsulation of Semiconductor Chips, Ph.D Dissertation, Cornell University, 1994
  6. White, F. M., Viscous Fluid Flow, McGraw-Hill, New York, 1974
  7. Nguyen, L.T., 'Wire bond behavior during molding operations of electronic packages,' Polymer Engineering and Science, V. 28, pp. 926-943, 1988 https://doi.org/10.1002/pen.760281408
  8. Takaisi, Y., 'Note on the drag on a circular cylinder moving with low speeds in a viscous luquid between two parallel walls,' J. Physical Society of Japan, V.11, p. 1059, 1056
  9. Bird, R. B., Armstrong, R. C. and Hassager, O., Dynamics of Polymeric Liquids, Vol. 1, Wiley-Interscience, New York, 1987
  10. Huebner, K. H. and Thornton, E. A., The Finite Element Mehod for Engineers, John Wiley & Sons, New York, 1982
  11. Taneda, S., 'Experimental Investigation of the Wall-Effect on a Cylindrical Obstacle Moving in a Viscous Fluid at Low Reynolds Numbers,' J. of the Physical Society of Japan, V. 19, pp. 1024-1030, 1964
  12. Young, W. C., Roark's Formulas for Stress and Strain, pp. 326-328, McGraw-Hill Book Company, New York, 1975
  13. Arpaci, V. S., Conduction Heat Transfer, Addison-Wesley Publishing Company, Reading, MA, 1996
  14. Kamal, M. R. and M. E. Ryan, Chapter 4 of Injection and Compression Molding Fundamentals, A. I. Isayev (editor), Marcel Dekker, New York, 1987