References
- Fujimoto, H., Takagishi, S., Senda, J., 1995, 'Spray Characteristics of High-Pressure Diesel Spray,' ILASS·Korea, pp. 126-131
- 차건종,김덕줄,1999,'충돌 분무의 내부구조와 미지적 거동에 관한 연구,'대한기계학회 논문집,제23권,제4호,pp.470-478
- Kato, S. and Onishi, S., 1990, 'Newtype of Diesel Engine by Impinging of Fuel Jet (Oska-D),' SAE 9016
- Issa, R. I., 1986, 'Solution of the Implicitly Discretised Fluid Flow Equations by Operator splitting,' J. Compo Phys., 61(1), pp. 45-65 https://doi.org/10.1016/0021-9991(86)90099-9
- Watkins, A. P., 1989, 'Three-dimensional Modeling of Gas Flow and Sprays in Diesel Engines,' In ?N.C. Makatos, editor, Computer Simulation of Fluid Flow, Heat and Mass Transfer and Combustion in Reciprocating Engines, pp. 193 -237, Hemispher
- Wang, D. M., 1992, 'Modeling Spray WaH Impaction and Combustion Processes of Diesel Engines,' Ph.D.thesis, University of Manchester faculty of Technology
- K. Park, and D. M. Wang, and A. P. Watkins, 1993, 'A Contribution to the Design of Novel Direct Injection Diesel Engine Combust System. Analysis of Pip Size,' Appl. Math Modeling, Vol 17, pp.114-124 https://doi.org/10.1016/0307-904X(93)90036-G
- Park. K. and Watkins. A. P., 1996. 'An Investigation of Combustion Chamber Shapes Small Automotive Direct Injection Diesel Engine Employing Spray Impaction,' IMechE Journal of Automobile Engineering, Vol 2, pp. 261-272
- 류성목,차건종,김덕줄,박권하,1998,'기연소실에서 새로운 충돌분무 형성에 대한 치적 고찰,' 대한기계학회 논문집,제22권 11호,pp.1625-1634
- 김덕줄,차건종,서경일,1996'충돌원판 설치조건에 따른 디젤분무의 거동특성', 액체미립화학회 1996년도 학술강연회 논문집, pp.92-98
- El-Wakil, Uyehara. O. A. , and Myers. P. S., 1954, 'A Theoretical Investigation of Heating Up Period of Injected Fuel Droplet Vaporizing in Air,' NASA TN_3179
- Faeth. G. M., 1983, 'Evaporation And Combustion Of Sprays,' Prog. Energy Combust. Sci. Vol. 9, pp. 1-76 https://doi.org/10.1016/0360-1285(83)90005-9
- Faeth G. M., 1977, 'Current Status of Droplet and Liquid Combustion,' Prog. Energy Combust. Sci. Vol. 3, pp. 191-224 https://doi.org/10.1016/0360-1285(77)90012-0
- Watkins, A. P. and Park, K., 1996, 'Assesment and Application of a New Spray Wall Impaction Model,' Competers Reciprocating Engines and Gas Turbines, l. Mech,E, pp. 1-10.