한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제17권3호
  • /
  • Pages.114-121
  • /
  • 2000
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

새로운 개념의 드릴에 의한 구멍가공시 버 형성에 관한 연구

Analysis on Burr Formation in Drilling with New Concept Drill

  • 고성림 (건국대학교 기계설계학과) ;
  • 전근배 (건국대학교 기계설계학과 대학) ;
  • 이징구 (건국대학교 기계설계학과 대학원)
  • 발행 : 2000.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A new concept drill was developed recently (or increasing accuracy and productivity in drilling operation. The burr formation in drilling causes many problems in deburring operation because burrs are formed inside holes and it is difficult to remove them. Burr formations are observed in drilling operation with a new concept drill and are compared with conventional HSS drill. Several workpieces with different materials are drilled with several cutting conditions, velocity and feed rate. The burr in drilling can be classified into three types according to the location of crack. To observe the burr formation mechanism, the cap which is formed with the new concept drill is observed and measured.

키워드

참고문헌

  1. S.L.Ko, D.Dornfeld, 'A Study on Burr Formation Mechanism,' Trans. of ASME, J. of Eng. for Materials and Technology, Vol. 113, pp. 75-87, 1991
  2. S.L.Ko, J.K.Lee, G.B.Jun, 'Measurement Technology for Micro Burr,' Proceedings for 5th Int. Conf. on Deburring and Surface Finishing, SanFrancisco, pp. 314-326, Sep.29-Oct.1, 1998
  3. 고성림, 전근배, 이징구, 레이저를 이용한 효율적인 버측정방법에 관한 연구, 한국정밀공학회, 추계학술대회 논문집(I), pp. 75-78, 1998
  4. T. Miyake, A.Yamamoto, K.Kitajima, Y.Yanaka and K.Takazawa, 'Syudy on Mechanism of Burr Formation in Drilling Deformation of Material during Burr Formation,' JSPE-57-03, Vol. 3, pp. 87-92, 1991
  5. L.K.Gillespie and P.K.Blotter, 'The Formation and Properties of Machining Burrs,' Trans. of ASME, J. of Eng. for Industry, pp. 64-74, 1976