참고문헌
- 이재천, '폐컴퓨터의 발생 및 처리현황,' 자원생산, 4월, pp. 10-12, 한국자원재생공사, 서울, 한국, 1997
- Elaine Y. L. Sun, 'The Recovery of Metals from Electronic Scrap,' JOM, Vol. 43, No. 4, pp. 53-61, 1991
- Hoffmann, J. E., 'Recovering Precious Metals from Electronic Scrap,' JOM, Vol. 44, No. 7, pp. 43-48, 1992
- Bernardes, A., I. Bohlinger and D. Rodriguez et al., 'Recycling of Printed Circuit Boards by Melting with Oxidising/Reducing Top Blowing Process,' Proc. of Sessions and Symposia sponsored by the Exttraction and Processing Division(B. Mishra, Ed.), TMS Annual Meeting, pp. 363-375, 9-13 February, Orlando, Florida, 1997
- Brodersen, K., D. Tartler and H.W. Bergmann et al., 'Scrap of Electronics; Hazardous Waste or Raw Material Resource?,' Interna. Conf. on the Recycling of Metals, MIS of ASM, 45-51, The European Council of ASM Intern. and its Technical Committee, Dusseldorf/aeuss-Germany, 13-15 May 1992, Printed n Belgium, 1992
- 이재천, 이강인, 이철경 등, '기계적 처리에 의한 반도체 IC칩 스크랩으로부터 유가금속의 분리에 관한 연구,' 자원리싸이클링, Vol. 3, No. 1, pp. 38-43, 1994
- Fisher, K., 'Die Elektronikschrott-Verordnung-Zur Problematik aus der Sicht des Verordunugsgebers,' Metall, Vol. 48, No. 11, pp. 380-382, 1994
- 六川暢子, 田中幹也, 坂本宏, 'ブリソト配線板の粉碎および熱特性,' 資源 と 環境, Vol. 1, No. 3, pp. 73-81, 1992
- Edson, G., 'Recovery of Precious Metals from Electronic Scrap,' Recovering and Refining of Precious Metals, Paper 10, Skytop, PA: IPMI, 1981
- Dunning, B.W. Jr., 'Precious Metals Recovery from Electronic Scrap and Solder used in Electronics Manufacture,' Precious Metals Recovery Low Grade Resources, IC 9059 (Washington, D.C.:U.S. Bureau of Mines), pp. 44-56, 1986
- Masuda, Y., R.Miyabayashi and H. Yamaguch, Japan Kokai Tokkyo Koho, JP6311,627 [8811,627] (C1.C22B11/02), 1988
- Koyanaka, S., S. Endoh and H. Iwata, 'The Recycling of Printed Wiring Board Scraps Using a Shape Sorting Technique,' J. Soc. Powder Technol., Japan, Vol. 32, pp. 385-391, 1995
- Lee, J-C., S. Koyanaka, Minyong Lee, S. Endoh et al., 'Recovery of Copper, Tin and Lead From the Spent Printed Circuit Boards(PCBs) by the Shape Separation Method,' MMIJ, Vol. 113, No. 5, pp. 357-362, 1997
- 한국자원연구소, '전자산업 폐기물로부터 금, 은 등의 귀금속 및 니켈, 동의 회수기술 개발(I),' 제 1차 년차보고서, KR-93(T)-28, 1993
- Setchfield, J. H., 'Electronic Scrap Treatment at Engelhard,' Precious Metals 1987, ed. G. Vermeylen and R. Verbeeck, pp. 147-164, Allentown, PA: IPMI, 1987
- Hedlund, L., and L. Johansson, 'Recent Developments in the Boliden Lead Kaldo Plant,' Recycle and Secondary Recovery of Metals, ed. P.R. Taylor, H.Y. Sohn and N. Jarrett, pp. 787-796, Warrendale, PA:TMS, 1985
- Day, J. G., U.S. Patent 4,427,442, 1984
- Petrovicky, J., P. Vejnar, and J. Harman, 'Neue Erkenntnisse bei der Verarbeitung polymetallischer Sekundarrohstoffe durch ammoniakalische Laugung,' Freiberger Forschugsh. A, A746, pp. 115-126, 1987
- Krupka, D. and B. Chelminski, 'Wiedergewinnung des Goldes und anderer Metalle aus Elektronikschrotten,' Freiberger Forschugsh. B. B260, pp. 88-91, 1987
- Verbeeck, R., F. Lauwersand, and G. Vermeylen, 'The Recycling and Recovery of Precious Metals Integrated in Mho's Smelter,' Platinum Group Metals Seminar 1985, pp. 3-12, Washington D.C., 1986
- Embleton, F. T., Precious Metals, ed. R.O. McGachie and A.G. Bradley, pp. 81-92, Toronto, Ont., Canada, Pergamon Press, 1981
- 이재천, 양정일, 정헌생, 송병선, '폐PC의 재활용,' 제3회 폐기물 처리 및 재활용 워크샵, 이경운, 45-63, 한국자원연구소, 대전, 23 April 1998, 대전, 1998