초록
본 연구에서는 강구조물에 자주 사용되고 있는 용접구조용강재를 대상으로 강재검사성적증명서를 수집하고 이를 통계적으로 분석, 정리해서 기계적 성질의 특성을 정량적으로 평가하였다. 본 연구결과 현재 국내에서 생산되는 용접구조용강재의 기계적 성질은 현행 KS에서 규정하고 있는 기준값을 만족하였으며, 판두께 및 강도등급과 일정한 상관관계가 있음을 알 수 있었다. 강종별 판두께 및 강도등급과 기계적 성질 사이에는 선형적인 비례관계가 성립, 본 연구결과는 기존 연구결과와 유사한 경향이 있음을 알 수 있었다. 현행 KS에서는 강재의 기계적 성질 중 항복점 응력에 대한 상한값이 규정되어 있지 않는데, 강재의 변형성능을 충분하게 확보하기 위해서는 항복비 (또는 항복강도)의 상한값을 규정 할 필요가 있을 것으로 생각된다.
In this study, we have quantitatively estimated the mechanical properties of structural welding steels widely used in steel structures after correcting the millsheets of the steels using statistical technique. From this result, in present, the mechanical properties of the steels produced in domestics have satisfied the prescribed values in Korean Standards. The mechanical properties of the steels were dependent upon the plate thickness & class of the steels. Also, there have been linear relations between the plate thickness & class of the steels and the mechanical properties of the steels. And the results of this study have shown the similar tendencies with the existing results. Because the upper limit value of yield strength is not prescribed at Korean Standards in present, it is necessary to prescribe the upper limit value of yielding ratio(or yield strength) in order to assure the deformation performance of the steels.