DOI QR코드

DOI QR Code

A Study on the 43$0^{\circ}C$ Degradation Behavior of Cast Stainless Steel(CF8M) (III) - Evaluation of Elastic-Plastic Fracture Toughness -

주조 스테인리스강 CF8M의 43$0^{\circ}C$ 열화거동에 관한 연구 (III) - 탄소성 파괴인성 평가 -

  • Published : 2000.10.01

Abstract

A cast stainless steel may experience an embrittlement when it is exposed to approximately 30$0^{\circ}C$ for long period. In the present investigation, The three classes of the thermally aged CF8M specimie n are prepared using an artificially accelerated aging method. Namely, after the specimen are held for 300, 1800 and 3600hrs. at 43$0^{\circ}C$ respectively, the specimens are quenched in water to room temperature. Load versus load line displacement curves and J-R curves are obtained using the unloading compliance method. $J_{IC}$ values are obtained following ASTM E 813-87 and ASTM E 813-81 methods. In addition to these methods, JIC values are obtained using SZW(stretch zone width) method described in JSME S 001-1981. The results of the unloading compliance method are $J_Q$=485.7 kJ/m$^2$ for virgin material, $J_{IC}$ of the degraded materials associated with 300, 1800 and 3600hrs are obtained 369.25 kJ/m$^2$, 311.02 kJ/m$^2$, 276.7 kJ/m$^2$, respectively. The results of SZW method are similar to those of the unloading compliance method. Through the elastic-plastic fracture toughness test, it is found that the value of $J_{IC}$ is decreased with increasing of the aging time. The results obtained through the investigation can provide reference data for a leak before break(LBB) of reactor coolant system of nuclear power plants.

Keywords

References

  1. Solomon, H. D., and Levinson, Lionel M., 1978, ' Mossbauer Effect Study of 475℃Embrittlement of Duplex and Ferric Stainless Steels,' Acta Metallurgical, Vol. 26, pp. 429-442 https://doi.org/10.1016/0001-6160(78)90169-4
  2. Chung, H. M., and Leax, T. R., 1989,' Embrittlement of Laboratory and Reactor Aged CF-3,CF-8 and CF-8M Duplex Stainless Steel,' International Workshop on Intermediate-Temperature Embrittlement Processes in Duplex Stainless Steel, August 1-2, Oxford, England
  3. Chopra, O. K., and Chung, H. M., 1989,' Initial Assessment of the Process and Significance of Thermal Aging in cast stainless Steels,' NUREG/CP-097, Vol. 3, pp. 519-546
  4. Chopra, O. K., and Chung, H. M., 1989, ' Aging Degradation of Cast Stainless Steels : Effect on Mechanical Properties,' Environmental Degradation of materials in Nuclear Power Systems, pp. 737-748
  5. International Atomic Energy Agency Advanced Incident Reporting System 분석자료, 1996
  6. 日本原子力硏究委員會, 1993, 原子力發電プラ-ントの保守ㆍ經年化對策に關する國內シンポヅウム
  7. 권재도, 1992,' 장기사용 Cr-Mo강 열화재의 파괴인성평가와 수명예측,' 대한기계학회논문집, 제16-8, pp. 1421-1428
  8. 권재도, 박중철, 이용선, 이우호, 박윤원, 2000, ' 주조 스테인리스강 CF8M강 열화거동에 관한 연구(I) (열화기구, 정적 및 피로강도평가),' 대한기계학회논문집A 제24권, 제8호, pp. 1910-1916
  9. ASTM, 1989,' Standard Test Method for $J_{IC}$, A Measure of Fracture Toughness,' ASTM E813-87
  10. Landes, J. D., and Begley, J. A., 1974, ' Test Result from J-Integral Studies : An Attempt to Establish a Jic Testing Procedure,' Fracture Analysis ASTM STP 560, pp. 170-186
  11. JSME ' 彈塑性破壤靭性J試驗方法,' 日本機械學會基潗 JSME S 001 ~ 1981
  12. Kobayshi, H., Hirano, K., Nakamura, H., and Nakazawa, H., 1977, Proc.ICF 4, p. 583
  13. Clarke, G. A., Andrews, W. R., Paris, P. C., and Schmidt,D. W., 1976, ASTM STP 590, p. 27
  14. Lowes, J. M., and Fearnehough, G. D., 1971, Engineering of Fracture Mechanics, 3, p. 103 https://doi.org/10.1016/0013-7944(71)90002-6
  15. ASTM,' Standard Test Method for Determining J-R Curves,' ASTM E1152-87