Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the 43$0^{\circ}C$ Degradation Behavior of Cast Stainless Steel(CF8M)(II)-Evaluation of Low Cycle Fatigue Characteristics-

주조 스테인리스강 CF8M의 43$0^{\circ}C$ 열화거동에 관한 연구 (II) -저사이클 피로특성 평가-

  • Published : 2000.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

A thermal aging is observed in a primary reactor cooling system(RCS) made of a casting stainless steel when the RCS is exposed for long period at the reactor operating temperature, 290~3300C An investigation of effects of thermal aging on a low cycle fatigue characteristics included a stress variations caused by a reactor operation and trip, is required. The purpose of the present investigation is to find an effect of a thermal aging of the CF8M on a low cycle fatigue life. The specimen of CF8M are prepared by an artificially accelerated aging technique holding 300 and 1800hr at 4300C respectively. The low cycle fatigue tests for the virgin and two aged specimens are performed at the room temperature for various strain amplitudes($\varepsilon$ta), 0.3, 0.5, 0.8, 1.0, 1.2 and 1.5% strain. Through the experiment, it is found that the fatigue life is rapidly reduced with an creasing of the aging time. The experimental fatigue life estimation formulas between the virgin and two aged specimen are obtained and are proposed to a analysis purpose.

Keywords

References

  1. Solomon, H.D. and Levinson, Lionel M., 1978, 'Mossbauer Effect Study of $475^{\circ}C$ Embrittlement of Duplex and Ferritic Stainless Steels,' Acta Metallurgical, Vol. 26, pp. 429-442
  2. Chorpra, O. K. and Chung, H. M., 1989, 'Initial Assessment of the Process and Significance o Thermal Aging in Cast Stainless Steels,' NUREG/CP-097, Vol. 3, pp. 519-546
  3. Korb, Lawrence J. and Olson, David L., 1987, 'Metals Handbook(R)(Ninth Edition),' ASM International, Vol. 13, Corrosion, pp. 338-343
  4. 川田雄一, 1982, '金屬の疲勞と設計,' オ―ム社, pp. 179-185
  5. 권재도, 박중철, 이용선, 이우호, 박윤원, 2000, '주조 스테인리스강 CF8M의 $430^{\circ}C$ 열화거동에 관한 연구 (I)-열화기구·정적 및 피로강도평가,' 대한기계학회 논문집, 제24권, 제8호, pp. 1910-1916
  6. ASTM, 1977, 'Tentative Recommended Practice for Constant-Amplitude Low Cycle Fatigue Testing,' ASTM E 606-671, pp. 654-671
  7. Raske, D.T . and Morrow, J. D., 1969, 'Mechanics of Materials in Low Cycle Fatigue Testing,' Manual on Low Cycle Fatigue Testing, ASTM STP 465, pp. 1-25
  8. Rao, K. B. S., Sandhya, R., Ray. S. K., Manson, S. L. and Rodriguez, 1985, 'Int. J. Fat.,' Vol. 7, pp. 141-147 https://doi.org/10.1016/0142-1123(85)90024-6
  9. 向井喜彦 等, 1983, 材料, Vol. 32, No. 355, pp. 399
  10. 川島忠義 等 共譯, 1970, 金屬 疲勞破壤, 丸喜, p. 158
  11. Tomkins, B., 1980, August, September, 'Metal Science,' p. 410
  12. 이수찬, 남수우, 1990, '터빈로타에서 사용되는 1%CR-Mo-V강 및 12%CR-Mo-V강의 연속 저주파 피로특성에 관한 연구,' 대한금속학회지, 제28권, 제9호, pp. 818-824
  13. Smith, R. W., Hirschberg, M. H. and Manson, S. S., 1963, 'Fatigue Behavior of Materials under Strain Cycling in Low and Intermediate Life Range,' NASA TND-1574
  14. Basqin, O. H., 1910, 'The Exponential Law of Endurance Tests,' Proceedings, American Society for Testing and Materials, ASTEA, Vol. 10, pp. 625-630
  15. Slama, G., Petrequin, P., Manson, S. H. and Mager, T., 1983, 'Effects of Aging on Mechanics Properties of Austenitic Stainless Steel Casting and Welds,' SMiRT POST CONFERENCE SEMINR 6, pp. 1-24
  16. Laird, C., 1967, 'The Influence of Metallurgical Structure on the Mechanisms of Fatigue Crack Propagation', ASTM STP 415, p. 131
  17. Pelloux, R. M. N., 1969, 'Mechanism of Formation of Ductile Fatigue Striations,' Transactions of the ASM, p. 62, p. 281
  18. Slama, G., Petrequin, P. and Mager, T., 'Effect of Aging on Mechanical Properties of Austenitic Stainless Steel Casting and Welds,' Structural Integrity of LWR, 7th SMiRT, pp. 211-240