Abstract
The Sobeaksan Gneiss Complex in the Punggi area is composed of mainly mignatitic gneiss, porphyroblastic gneiss, garnet granitic gneiss and biotitie granitic gneiss. Metamorphic grade increase gradually from the amphibolite facies of northwestern part to the granulite facies of southwestern part in the study area. Representative mineral assemblage in the amphibolite facies is biotite-muscovite-K-feldspar-plagioclase$\pm$garnet$\pm$epidote, needle shape or fibrous sillimanite occur in transitional zone from the amphibolite facies to the granulite facies. In the granulite facies, the garnet-Opx granulite shows garnet-orthopyroxene-biotite-plagioclase, the metabasite shows clinopyroxene-plagioclase$\pm$hornblende$\pm$orthopyroxene$\pm$garnet and the migmatitic gneiss shows garnet-biotite-sillimanite-cordierite$\pm$spinel as representative mineral assemblage. Retrograde metamorphism after the granulite facies metamorphism made corindum and andalusite in the migmatitic gneiss and the thin layer garnet between clinopyroxene and plagioclase in the metabasites. The peak P-T conditions of the migmatitic gneiss and the garnet-Opx granulite are $916^{\circ}C$/6.6 kb and $826^{\circ}C$/6.3 kb, respectively. The P-T condition of biotite and plagioclase inclusion, which indicates the progressive condition of the granulie facies, within garnet is $866^{\circ}C$/7.5 kb and that of rim composition of garnet and biotite is $726^{\circ}C$/4.6 kb, which infer the clockwise P-T path of the granulite facies metamorphism. The temperatures caculated by the rim composition of garnet and biotite in the migmatitic gneiss and garnet granitic gneiss have a wide range of $556-741^{\circ}C$, which indicate that the retrograde metamorphism after the granulite facies metamorphism has effected differently. It is difficult to determine the P-T condition of the biotite granitic gneiss because less occurrence and higher spessartine content of garnet. The P-T condition of the thin layered garnet between clinopytoxene and plagioclase in the metabasite is $635-707^{\circ}C$/4.1-5.3 kb. This texture indicates the isobaric cooling(IBC) condition of the retrogressive metamorphism. As a result, the metamorphic evolution of the Punggi area has undergone the isobaric cooling after the granulite facies metamorphism which has undergone the clockwise P-T path.
풍기일대 솝개산편마암복합체는 미그마타이트질 편마암, 반상변정질 편마암, 석류석 화강암질 편마암 그리고 흑운모 화강암질 편마암이 주를 이룬다. 변성염기성암들이 부우딘 또는 포획암으로 존재하며 석류석-사방휘석 백립암이 소규모로 나타난다. 이 지역은 앰피볼라이트상의 변성작용을 받은 북서에서 백립암상의 변성작용을 받은 남동으로 갈수록 변성도가 점진적으로 증가한다. 앰피볼라이트상의 대표 광물조합은 흑운모-백운모-K장성-사장석$\pm$석류석$\pm$녹염석이며 앰피볼라이트-백립암상 전이대는 침상 또는 섬유상을 보이는 규선석의 생성이 특징적이다. 백립암상의 변성작용을 받은 지역에서 석류석-사방휘석 백립암은 석류석-사방휘석-흑운모-사장석의 광물조합을, 변성염기성암은 단사휘석-사장석$\pm$각섬석$\pm$사방휘석$\pm$석류석의 광물조합을, 미그마타이트질 편마암은 석류석-흑운모-규선석-근청석$\pm$스피넬의 광물조합을 각각 보인다. 백립암상 변성작용이후 후퇴변성작용에 의해 미그마타이트질 편마암은 스피넬, 강옥, 홍주석 등을 생성하며 변성염기성암은 단사휘석과 사장석의 접합부에서 얇은 띠상의 석류석을 생성한다. TWEEQU에 의해 계산된 최대 변성온도-압력은 미그마타이트질 편마암에서 $916^{\circ}C$/6.6kb이며 석류석-사방휘석 백립암에서 $826^{\circ}C$/6.3kb이다. 백립암상의 전진변성과정을 지시하는 석류석 반상변정내에 포획된 사장석과 흑운모를 사용하여 구한 온도-압력은 $866^{\circ}C$/7.5kb이며 석류석의 가장자리와 그에 접하는 흑운모를 사용하여 구한 온도-압력은 $726^{\circ}C$/4.8kb로 온도와 압력이 감소하는 시계방향 압력-온도경로를 보인다. 미그마타이트질 편마암과 석류석 화강암질 편마암에서 석류석과 흑운모의 가장자리 조성을 사용하여 구한 온도들은 $556-741^{\circ}C$로 넓은 범위를 보여 백립암상의 변성작용이후 수회변성정도가 차이가 있었음을 지시한다. 흑운모 화강암질 편마암은 석류석의 산출이 적고 석류석의 스페서틴 함량이 높아 정확한 변성환경을 규명하기 힘들다. 단사휘석과 사장석사이에 띠상으로 나타나는 석류석을 함유하는 변성염기성암의 변성온도-압력은 $635-707^{\circ}C$/4.1-4.3kb이다. 이러한 구조는 퇴변성작용의 진화과정이 등압하 온도감소(IBC, isobaric cooling)환경을 거쳤음을 지시한다. 이상의 결과들은 풍기지역이 시계방향의 압력-온도 경로를 가지는 백립암상의 변성작용후에 IBC를 겪었음을 지시한다.