The Korean Journal of Ceramics

한국세라믹학회 (The Korean Ceramic Society)
권호 표지

Capsule Free Hot Isostatic Pressing of Ceria-Doped Tetragonal Zirconia Powder Crystallized in Supercritical Methanol

  • Shu Yin (Institute for Chemical Reaction Science, Tohoku University) ;
  • Satoshi Uehida (Institute for Chemical Reaction Science, Tohoku University) ;
  • Yoshinobu Fujishiro (Institute for Chemical Reaction Science, Tohoku University) ;
  • Mamoru Ohmori (Institute for Materials Research,Tohoku University) ;
  • Tsugio Sato (Institute for Chemical Reaction Science, Tohoku University)
  • 발행 : 1999.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Capsule free hot isostatic pressing (HIPing) of 12 mol% $CeO_2-88 mo% ZrO_2 (12CeO_2-88ZrO_2)$ powder was conducted at 1100~$1200^{\circ}C$ using the powder crystallized in supercritical methanol followed by supercritical drying. Porous $12CeO_2-88ZrO_2$ ceramics with ~35% open porosity, micropore diameter of ~23 nm and a narrow pore size distribution were fabricated by capsule free hot isostatic pressing at $1100^{\circ}C$. The porosity increased with decrease in HIPing temperature and was accompanied by a steady decrease in fracture strength.

키워드

참고문헌

  1. Key Eng. Mater v.122-124 Applications of Porous Ceramics I. Nettleship
  2. Yogyo-Kyokai-Shi v.91 Preparation of Porous Mg-Al Spinel Ceramics S. Kanzaki;H. Tabata;N. Otsuka;Z. Nakagawa;K. Hamano
  3. J. Ceram. Soc. Jpn. v.104 Fabrication Technique of Fine and Highly Porous Ceramics Compacts Y. Seki;T. Kodama;I. Matsubara;K. Tanimoto;T. Ogura
  4. J. Mater. Sci. v.29 Preparation of Bimodal Porous Mullite Ceramics H. Abe;H. Seki;A. Fukunaga;M. Egashira
  5. J. Am. Ceram. Soc. v.80 Preparation of Porous Glass-Ceramics with a Skeleton of NASICON-Type Crystal $CuTi_2(PO_4)_3$ K. Yamamoto;T. Kasuga;Y. Abe
  6. J. Am. Ceram. Soc. v.80 Formation of Anatase Porous Ceramics by Hydrothermal Hot-Pressing of Amorphous Titania Spheres K. Yanagisawa;K. Ioku;N. Yamasaki
  7. J. Am. Ceram. Soc. v.73 Property-Porosity Relationships for Polymer-Impregnated Superconducting Ceramic Composite S. Salib;Vipulanandan
  8. Ferroelectrics v.131 Preparation of Poroys PZT with High Connectivity Using Capsule-Free $O_2-HIP$ and Their Dielectric Properties T. Hayahsi;S. Sugihara;K. Okazaki
  9. J. Am. Ceram. Soc. v.77 Porous Ceramic Filters Produced by Hot Isostatic Pressing M. Nanko;K. Ishizaki;T. Fujikawa
  10. Phys. Rev B v.43 Mechanical Strength of Highly Porous Ceramics I. C. Van den Born;A. Santen;H. D. Hoekstra;J. Th. M. De. Hosson
  11. J. Mater. Sci. v.28 Comparison of Stress Concentration Versus Minimum Solid Area Based Mechanical Property-Porosity Relations R. W. Rice
  12. J. Eur. Ceram. Soc. v.15 Mechanical Properties of a Partially Sintered Alumina D. Hardy;D. J. Green
  13. Brit. Ceram. Trans. v.95 Crystallisation of Ceria Doped Zirconia in Liquid Media at High Tempeatures T. Sato;Y. Inoue;T. Odashima;M. Ishitsuka;E. Min
  14. Brit. Ceram. Trans. v.96 Characterisation of Ceria and Yttria Codoped Zirconia Crystallised in Supercritical Methanol S. Yin;Y. Fujishiro;T. Sato
  15. Brit. Ceram. Trans. v.97 Low Temperature Sintering and Characterisation of Ceria and Yttria Codoped Zirconia/Alumina Composites Crystallised in Supercritical Methanol S. Yin;Y. Fujishiro;S. Uchida;T. Sato
  16. TRANS AIME v.197 Measurement of Particle Sizes in Opaque Bodies R. L. Fullman;J. Metals
  17. J. Am. Chem. Soc. v.73 The Determination of Pore Volume and Area Distribtion is Porous Substances. I. Computations from Nitrogen Isotherms E. P. Barrett;L. G. Joyner;P. Halenda
  18. Am. Ceram. Soc. Bull. v.65 Young's Modulus-Porosity Relation in Gypsum Systems K. K. Phani