The influence of processing condition and assistance gas in microhole machining of $Al_2O_3$ ceramics

$Al_2O_3$ 세라믹의 미세구멍 가공시 가공조건과 보조가스가 미치는 영향

  • Published : 1999.10.01

Abstract

This research is a described result of experimental for the parameter's effecting the microhole machining by Nd-Yag laser, The parameters are energy, pulse interval time a kin of assisting gas and its pressure. The result reveals that parameter value of energy 0.08J, pulse 20Hz, interval time of 300 microseconds could be a good machining condition to make upper microhoel that is the diameter range of 50-70${\mu}{\textrm}{m}$. At tat time the assistant gas such air, $O_2$, Ar $N_2$, was appelied. Assistant gas of air makes heat affected zone enlarge due to burning of material surface. Also it makes microhole irregular and damageable. Because of refusion caused by chemical reaction with $Al_2O_3$ ceramic material . The $O_2$(99.9%) has good characteristics to get good drilling and smooth surface on pressure of 0.2kgf/$\textrm{cm}^2$ but it is expensive. Ar, $N_2$ make material crack and burnning and proved that to be unappropriate but, Ar was a better than $N_2$.

Keywords

References

  1. IEEE Journal of Quantum Electronics v.QE-8 Thermal Analysis of Laser Drilling Processes Paek, u.-c.;Gagliano, F.P.
  2. Journal of Applied Physics v.47 Laser Drilling Velocity in Metals Von Allmen, M.
  3. Journal of the-mophysics and Heat Transfer v.4 no.3 General Model for Ther-mochemical Ablation into avacum Risch, T.K.;Lanb, B.
  4. ASME Journal of Heat Transfer v.113 no.3 Multiple Reflection Effects on Evaporative Cutting With a Moving CW Laser Bang, S.Y.;Modest, M.F.
  5. Proceedings of CALEO'91 The Theoretical Investigation of Gas Assisted Laser Cutting Chen, S. L.;Steen, W. M.
  6. ASME v.111 Effect of Shielding Gas Pressure in Laser Cutting of Sheet Metals S. J. NA
  7. Soviet Journal of Quantum Electronics v.15 Self-Focusing and Waveguide Propagation of Radiation in the Case of Deep Pentration of a Metal by a Laser Beam Borkin, A. G.;Drobyazko, S.V.;Levchenko, E.B.;Senatorov, Y.M.;Turygin, A.Y.
  8. journal of the Ceramic Society of Japan v.102 no.2 ャラミクスのレ-ザ穴あけにおける無点位置が加工穴形狀に及ぼす影響 森田 昇;桑田 隆