The Application of Finite Element Method to Process Design Considering Forming Limit in Deep Drawing

성형한계를 고려한 디프 드로잉 공정설계에 대한 유한 요소 해석

  • 최영 (부산대학교 기계기술연구소) ;
  • 이규호 (한국코어 주식회사 금형설계팀) ;
  • 고대철 (양산대학 메카트로닉스과) ;
  • 김병민 (부산대학교 정밀정형 및 금형가공 센터) ;
  • 최재찬 (부산대학교 정밀정형 및 금형가공 센터)
  • Published : 1998.12.01

Abstract

The limit drawing ratio (LDR) is a major process parameter in the process design of deep drawing. If the actual drawing ratio is greater than the LDR for a particular stage then an intermediate stage has to b added the process sequence to avoid failure during the drawing operation and the optimal process design considering for the first-drawing and redrawing by using finite element method combined with ductile fracture criterion. From the results of finrte element analysis the optimal value of drawing ratio is obtained which contributes to the more uniform distribution of thickess and the smaller values of the ductile fracture infinal cup.

Keywords