Journal of the Korean Society for Precision Engineering (한국정밀공학회지)
- Volume 15 Issue 7
- /
- Pages.61-68
- /
- 1998
- /
- 1225-9071(pISSN)
- /
- 2287-8769(eISSN)
Effects of the Grinding Conditions on the Shape of Center Ground Part
연삭조건이 원통연삭 공작물 형상에 미치는 영향
Abstract
The form accuracy of parts has become an important parameter. Therefore, dimensional tolerance and geometric tolerance are used in the design stage to satisfy required quality and functions of parts. But the informations on the machining conditions, which can satisfy the assigned geometric tolerance in design, are insufficient. The objectives of this research are to study the effects of the grinding parameters such as traverse speed, work speed, depth of cut, and dwell time on the after-ground workpiece shape, and to find out the major parameters among them. The results are as follows, The effects of work speed and depth of cut on workpiece shape are negligible compared with the effect of traverse speed. There is an optimal dwell time depending on the traverse speed. The optimal dwell time is decreasing as the traverse speed is increased.
Keywords