An Engine Structure-Borne Noise Analysis by Finite Element Method

유한요소법에 의한엔진 구조소음 해석

  • 안상호 (아시아자동차 서울연구소 엔진개발부) ;
  • 김주연 (정회원, 아시아자동차 서울연구소 엔진개발부) ;
  • 김규철 (아시아자동차 서울연구소 엔진개발부)
  • Published : 1998.01.01

Abstract

This paper presents the static analysis, the modal analysis and the forced vibration analysis on engine structures to find out the structure-borne noise sources by finite element method. The deformation of engine structures under the maximum combu- stion gas force was calculated through the static analysis, and the resonance possibilities were predicted by the modal analysis which ascertains mode shapes and the corresponding frequencies of engine global and its major noise sources in engine surfaces were investigated with the forced vibration analysis by means of finding the transfer mobilities on engine surfaces due to the piston impact and the velocity levels due to the combustion in consideration of oil film stiffness and damping coefficients. Finally, the direction of engine structure-borne noise reduction can be estabilished by the above-mentioned analysis procedure and the reduction effect of cost on proto-type engine build-up is expected.

Keywords

References

  1. SAE-Paper 911070 Design Strategies for Low Noise Engine Concept F.K.Brandl;P.Wuenche;E.Gschweitl
  2. ATA 3rd Int. Conference Application of Computer Simulation for the Prediction of Vibration and Noise in Engines H.H.Priebsch;W.Hellinger
  3. SAE-Paper 750838 Design Concepts of Diesel Engines with Low Noise Emission G.E.Thien;H.A. Fachbach
  4. SAE-Paper 820436 The Use of Finite Element Techniques to predict Engine Vibration J.P.Brandeis
  5. SAE-Paper 870977 Engine Noise : Practicalities and Prediction, Part 1-Hardware Evaluation M.D.Croker
  6. SAE-Paper 870978 Engine Noise : Practicalities and Prediction, Part 2-Finite Element Analysis R.J.Tyrrell;M.D.Croker
  7. SAE-Paper 790360 Modeling of Vibration Transmission in Engines to achieve Noise Reduction R.G.DeJong;J.E.Manning
  8. Ⅰ Mech E C109/82 Dynamic Structural Modeling for Low Noise Engine Design J.Affenzeller;G.E.Thien
  9. SAE-Paper 790506 A Review of Basic Design Principles for Low-noise Research Thien, G.E.
  10. SAE-Paper 900019 Structure Borne Noise Prediction Techniques H.Priebsch;J.Affenzeller
  11. SAE-Paper 870950 Some Strategies to meet Future Noise Regulations for Truck Engines F.K.Brandl;J.Affenzeller;G.E.Thien
  12. SAE-Paper 820435 Evaluating Engine Design for Low-noise using Dynamic Structural Modeling Affenzeller, J.;Thien, G.E.
  13. Research Report of Forschungsvereinigung Verbrennungs-kraftmaschinen e.V., Heft 97 Feder- und Daempfungs koeffizienten von Radialgleitlagern;Stiffness and Damping Coefficients of Radial Plain Bearings G.Schaffrath
  14. Konstrucktion 27 Zylindrische Gleitlager unter elastohydrodynamischen Bedingungen;Cylinderical Plain Bearings at Elastic-Hydrodynamic Conditions H.Peeken;G.Knoll
  15. SAE-Paper 880680 A Comparision of the Total Capacitance and Total Resistance Techniques for Measuring the Thickness of Journal Bearing Oil Films in an Operating Engine J.A.Spearot;C.K.Murphy
  16. SAE-Paper 880681 The Bearing Oil Film Thickness of Single and Multi-Grade Oils-Part 1 : Experimental Results in a 3.8L Engine A.K.Deysarkar
  17. MSC/NASTRAN USER's Manual MacNeal-Schwendler Cooperation