References
- Am. Ceram. Soc. Bull v.70 no.5 Fabrication of Engineering Ceramics by Injection Molding M.J. Edirishinghe
- Int J. High Tech. Ceram. v.2 no.4 Fabrication of Engineering Ceramics by Injection Molding. Ⅱ. Techniques M.J. Edirishinghe;J.R.G. Evans
- Am. Ceram. Soc. Bull. v.73 Low Pressure Injection Molding J.A. Mangels
- Powder Met. Int. v.21 Injection Molded Ceramic Rotors-Comparison of SiC and Si₃N₄ K. Hunold;J. Greim;A. Lipp
- Advances in Ceramics v.9 Ceramic Comonents by Injection Molding J.A. Mangels;W Trela;J. Mangels(ed.)
- Mat. Sci. Eng. v.A109 Systematic Development of the Ceramic Injection Molding Process M.J Edirisinghe;J.R.G. Evans
- Am. Ceram. Soc. Bull. v.70 no.8 Key Issues in Powder Injection Molding R.M. German;K.F. Hans;S.T.P. Lin
- Interceram. v.38 no.2 Injection Molding Machine for High-Performance Ceramics M. Inoue;Y. Kihara;Y. Arakida
- Br. Ceram. Trans. J. v.87 The Influence of Mixing Route on the Properties of Ceramic Injection Moulding Blends K.N. Hunt;J.R.G. Evans
- J. Mater. Sci. v.22 Properties of Ceramic Injection Moulding Formulations. Part Ⅰ: Melt Rheology M.J. Edirisinghe;J.R.G. Evans
- Ceram. Int. v.16 A Method for Selecting Organic Materials for Ceramic Injection Moulding S.J. Stedman;J.R.G. Evans;J. Woodthorpe
- Ceram. Int. v.17 The Effect of Processing Additives on the Properties of a Ceramic-Polymer Formulation M.J. Edirisinghe
- J. Mater. Sci. v.26 Fracture Strength of Low-Pressure Injection-Molded Reaction Bonded Silicon Nitride S.J. Kwak;E. Krug;S.C. Danforth
- Ceram. Int. v.22 Pore Structure Evolution During Solvent Extraction and Wicking S.W. Kim;H.W. Lee;H. Song;B.H. Kim
- Int. J. Powder Mat. v.23 Theory of Thermal Debinding R.M. German
- Ceram. Int. v.17 Removal of Organic Vehicle from Moulded Ceramic Bodies by Capillary Action J.K. Wright;J.R.G. Evans
- Ceramic Processing and Sintering M.N. Rahaman