초록
1차전단변형 판이론에 의한 비등방성 복합적층판의 임계좌굴하중 및 좌굴모드는 기존의 해석적인 방법으로는 다양한 조건에 대하여 해를 제공할 수 없다는 단점을 가지고 있다. 따라서 근사해법인 수치해석을 이용하게 되는데, 이러한 수치해석기법으로 기존 상용프로그램에서는 유한요소법이 널리 사용되었다. 그러나 least upper bound 특성을 가지고 있는 유한요소법을 이용한 적층판의 좌굴해는 구조적인 안정성을 보장하지 못하는 경우도 있다. 따라서 본 논문에서는 유한차분법에 의한 좌굴해석을 수행하여 유한요소법과 상호 비교함으로서 각 경우에 관한 두 가지 수치해석기법의 장단점을 규명하고 효과적으로 적용할 수 있는 기법을 제시하는 것을 목적으로 하였다. 수치해석 결과, 유한차분법에 의한 좌굴하중 및 좌굴모드는 신소재를 사용하는 적층 구조물의 실용화에 앞서 다양한 기준을 제시할 수 있을 것으로 판단된다.
The solution of anisotropic plate via the classical methods is limited to relatively load and boundary conditions. If these conditions are more complex, the analysis becomes increasingly tedious and even impossible. For many plate problems of considerable practical interest, analytic solutions to the governing differential equations cannot be found. Among the numerical techniques presently available, the finite difference method and the finite element method are powerful numerical methods. The objective of this paper is to compare with each numerical methods for the buckling load and modes of anisotropic composite laminated plates considering shear deformation. In applying numerical methods to solve differential equations of anisotropic plates, this study uses the finite difference method and the finite element method. In determining the eigenvalue by Finite Difference Method, this paper represent good convergence compared with Finite Element Method. Several numerical examples and buckling modes show the effectiveness of various numerical methods and they will give a guides in deciding minimum buckling load and various mode shapes.