TiN 피막처리된 Co-Cr계 교정용 선재의 물성

THE PHYSICAL PROPERTIES OF TIN ION-FLAYED CO-CR(ELGILOY) ORTHODONTIC WIRES

  • 김정민 (경북대학교 치과대학 교정학교실) ;
  • 권오원 (경북대학교 치과대학 교정학교실) ;
  • 김교한 (경북대학교 치과대학 치과재료학 교실)
  • KIM, Jung-Min (Department of Orthodontics, School of Dentistry, Kyungook National University) ;
  • KWON, Oh-Won (Department of Orthodontics, School of Dentistry, Kyungook National University) ;
  • KIM, Kyo-Han (Department of Dental Materials, School of Dentistry, Kyungpook National University)
  • 발행 : 1998.06.01

초록

TiN 피막처리된 Elgiloy (Co-Cr계 선재)의 임상 적용을 검토하기 위하여 제조된 상태의 Elgiloy, $250^{\circ}C$에서 30분간 가열처리된 Elgiloy, TiN 피막처리된 Elgiloy 각각의 4가지 temper, 그리고 비교를 위하여 스테인레스강 선재의 인장 강도와 경도를 측정한 결과 다음과 같은 결론을 얻었다. $\cdot$인장강도는 모든 temper에서 TiN 피막처리된 군이 가장 높았고, 가열처리된 군, 제조상태의 군의 순으로 나타났으나 가열처리된 군과 제조상태의 군간에는 통계학적으로 유의한 차가 없었다(p>0.05). $\cdot$인장강도는 각 temper에서 TiN 피막처리시 제조상태의 Elgiloy보다 약 $10kgf/mm^2$정도의 증가를 보였다. $\cdot$경도값은 Yellow, Green, 그리고 Red temper에서는 TiN 피막처리된 군이 가장 높았고, 가열처리된 군, 제조상태의 군의 순으로 나타났으나(p<0.05), Blue temper에서는 가열처리된 군과 제조상태의 군간에 통계학적으로 유의한 차가 없었다(p>0.05). $\cdot$경도값은 각 temper에서 TiN 피막처리시 제조상태 Elgiloy보다 약 $50\~90VHN$ 정도의 증가를 보였다. $\cdot$스테인레스강의 선재와 비교할 때 제조상태에서는 Red temper와, TiN 피막처리한 경우는 Green temper와 비슷한 인장강도를 나타내었다.

To estimate the possibility of clinical application of TiN ion-Plated Elgiloy(Co-Cr wire), measurements of tensile strength and hardness were made on the four tempers on each of the manufactured Elgiloy, the (heat-treated) Elgiloy for 30 minutes at $250^{\circ}C$ and the TiN ion-plated Elgiloy. For comparison, the tensile strength and hardness of Stainless Steel wires were also measured. The following are the results of the study: $\cdot$In the 4 tempers, tensile strength was the greatest in the TiN ion-plated group, followed by the heat-treated Elgiloy group and the manufactured Elgiloy group, but no statistical difference was noticed between heat-treated and manufactured Elgiloy groups(p>0.05). $\cdot$In each temper, tensile strength of ion-plated Elgiloy increased about $10kgf/mm^2$ in comparison with the values of the manufactured Elgiloy $\cdot$In yellow, green and red tempers except the blue, hardness was the greatest in ion-plated group. In the blue temper, there was no statistical difference between heat-treated and manufactured Elgiloy groups(p>0.05). $\cdot$In each temper, hardness of ion-plated Elgiloy increased about 50-90VHN in comparison with the values of the manufactured Elgiloy. $\cdot$The tensile strength of Stainless Steel wire was similar to that of the red temper of manufactured Elgiloy and the green temper of ion-plated Elgiloy.

키워드