한국해양공학회지 (Journal of Ocean Engineering and Technology)

한국해양공학회 (Korean Society of Ocean Engineers)
권호 표지

3차원 8절점 비적합 고체요소에 의한 복합재판의 순수굽힘문제의 정적.동적해석

Static and Dynamic Analyses of Pure Bending Problems of Composite Plates using Non-Conforming 3-Dimensional 8-Node Solid Element

  • 발행 : 1998.05.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, a non-conforming 3-D 8-node solid element(MQM10) has beets applied to the analyses of static and dynamic bending problems of laminated composite plates The QM10 element exhibits stiffer bending stiffness which is caused by the reduction of degree of freedom from Q11 element. As an effective way to correct the relative stiffness stiffening phenomenon the modification of Gauss sampling points for composite plates is proposed. The quantity of modification is a function of material properties. Also, another two modified equations are obtained, one is modification for stress, and the other is modification of coefficient of shear modulus in free vibration. It is noted that MQM10 element can analyse the static and free vibration problems of various 3-dimensional composite plates composed of unidirectional laminae, woven laminae or braided laminae. The results of MQM10 element are in good agreement with those of 20-node element.

키워드

참고문헌

  1. Int. J. Solids Struct. v.2 Elastic wave propagation in heterogeneous plates P.C. Yang;C.H. Norris;Y. Stavsky
  2. J. Comp. Mat. v.4 Exact solutions for rectangular bidirectional composites and sandwich plates N.J. Pagano
  3. J. Appl. Mech. v.28 no.3 Bending and stretching of certain types of heterogeneous aeolotropic plates E. Reissner;Y. Stavsky
  4. J. Aerospace Sci. v.29 no.8 On the theory of laminated anisotropic shells and plates S.B. Dong;K.S. Pister;R.I. Taylor
  5. J. Appl. Mech., Trans. ASME v.12 no.1 The effect of transverse shear deformation on the bending of elastic plates E. Reissner
  6. J. Appl. Mech., Trans. ASME v.18 Influence of rotatory inertia and shear on flexural motions of isotropic elastic plates R.D. Mindlin
  7. J. Appl. Mech., Trans. ASME v.37 Shear deformation in heterogeneous anisotropic plates J.M. Whitney;N.J. Pagano
  8. J. Appl. Mech., Trans. ASME v.51 A simple higher-order theory for laminated composite plates J.N. Reddy
  9. Int. J. Solids Struct. v.20 no.9/10 A refined nonlinear theory of plates with transverse shear deformation J.N. Reddy
  10. Appl. Mech. Rev. v.43 Assessment of computational models for multilayered composite shells A.K. Noor;W.S. Burton
  11. Shock Vib. Dig. v.22 A review of refined theories of laminated composites J.N. Reddy
  12. Int. J. Eng. Sci. v.27 A few remarks concerning several refined theories of anisotropic composite laminated plates L. Librescu;J.N. Reddy
  13. Int. J. Num. Meth. Eng. v.2 Analysis of thick and shell structures by curved finite elements S. Ahmad;B.M. Irons;O.C. Zienkiewicz
  14. J. Appl. Mech. v.49 no.1 Membrane locking and reduced integration for curved elements H. Stolarski;T. Belytschko
  15. Int. J. Num. Meth. Eng. v.28 Coupled use of reduced integration and non-conforming modes in quadratic Mindlin plate elements C.K. Choi;S.H. Kim
  16. Proc. US-Korea Joint Seminar/Workshop on Critical Eng. Sys. Improvement of degenerated plate/shell elements C.K. Choi;S.H. Kim
  17. Comp. Meth. Appl. Mech. Eng. v.20 A critical survey of the 9-node degenerated shell element with special emphasis on thin shell application and reduced integration H. Parisch
  18. Int. J. Num. Meth. Eng. v.20 Analysis of laminated composite shells using a degenerated 3-D element W.C. Chao;J.N. Reddy
  19. The 3rd Asian-Pacific Conference on Computational Mechanics Static and dynamic analyses of bending problems using modified 5-node equivalent element Y.D. Kwon;T.H. Yun
  20. Computers & Structures v.63 no.3 On the modification of Gauss sampling points of 6-node and 16-node isoparametric finite elements J.O. Kim;Y.D. Kwon
  21. NISA II, User's manual 4.4-4, version 91.0
  22. Concepts and Applications of Finite Element Analysis(3rd ed.) R.D. Cook;D.S. Malkus;M.E. Plesha
  23. Finite Element Procedures in Engineering Analysis K.J. Bathe
  24. Elasticity Theory and Applications Adel S. Saada
  25. Finite Element Analysis of Composite Laminates, Solid Mechanics and its Applications v.7 W.C. Chao;J.N. Reddy;G.M.L. Gladwell(ed.)
  26. R.A.I.R.O.(Numerical Analysis) v.12 Perturbation of mixed variational problems application to mixed finite element methods M. Bercovier
  27. Comp. Meth. Appl. Meth. & Engng. v.15 no.1 Mixed finite element methods-reduced and selective integration techniques : a unification of concepts D.S. Malkus;T.J.R. Hughes
  28. J. Comp. Mat. v.4 Exact solutions for rectangular bidirectional composites and sandwich plates N.J. Pagano
  29. Energy and Variational Methods in Applied Mechanics J.N. Reddy
  30. 대한기계학회논문집 v.19 no.4 수정된 3차원 16절점 요소에 의한 복합재 판의 자유진동 및 감쇠특성해석 윤태혁;권영두;김상엽
  31. 추계 한국 복합재료학회 논문 초록집 열 가소성 복합재료의 동적 특성에 관한 연구 김병노;구교남;이인