대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제20권2호
  • /
  • Pages.440-449
  • /
  • 1996
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

초소형재료의 펀치성형에 관한 유한요소해석

Finite Element Analysis of Punch Forming of Superplastic Materials

  • 허훈 (한국과학기술원 기계공학과) ;
  • 이기석 (한국과학기술원 기계공학과) ;
  • 최영준 (국방과학연구소)
  • Huh, Hoon (Dept. of Mechanical Engineering, Korea Advanced Institute of Science and Technology) ;
  • Lee, Ki-Seok (Dept. of Mechanical Engineering, Korea Advanced Institute of Science and Technology) ;
  • Choi, Yeong-Jun (Agency for Defense Development)
  • 발행 : 1996.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Superplastic punch forming of sheets is simulated by a finite element method to obtain the optimal punch speed and the related deformed shapes. The punch forming has an advantage of guaranteeing the desired accuracy inside a product and controlling the thichness of a deformed sheet more accurately than blow forming. The finit element code developed is associated with the contact algorithm and the control algorithm of punch speed for the optimum forming. The simulation demonstrates that the variation of the thichness in a blank sheet affects the punch speed and the final distribution of the thichness in a product. The analysis proposes that a ring-typed thichness controller is very effective in controlling the thichness of a deformed sheet appropriately.

키워드

참고문헌

  1. Int. J. Solids Structure v.14 Flow of Solids During Forming and Extrusion : Some Aspects of Numerical Solutions Zienkiewicz, O. C.;Jain, P. C.;Onate, E.
  2. Comput. Methods Appl. Mech. Engrg. v.45 A Primer on Superplasticity in Natural Formulation Argyris, J. H.;Doltsinis, J. S. L.
  3. Int. J. Mech. Sci. v.29 no.8 Numerical Analysis of Superplastic Bulging for Cavity-Sensitive Materials Zhou, D. J.;Lian, J.
  4. J. Eng. Indust. v.109 Analysis of Axisymmertric Sheet Forming Processes by Rigid-Viscoplastic Finite Element Method Park, J. J.;Oh, S. I.;Altan, T.
  5. Int. J. Numer. Methods Eng. v.26 Analysis of Superplastic metal Forming by a Finite Element Method Chandra, N.
  6. Comm. in Appl. Num. Methods v.5 A Pressure Cycle Control Algorithm for Superplastic Forming Bonet, J.;Wargadipura, A. H.;Wood, R. D.
  7. Numiform '89 Simulation of the Superplastic Forming of Thin Sheet Components Using the Finite Element Method Bonet, J.;Wargadipura, A. H. S.;Wood, R. D.
  8. Numiform '89 Numerical Modeling of Thin Sheet Superplastic Forming Bellet, M.;Chenet, J. L.
  9. Int. J. Mech. Sci. v.21 A New Formulation for the Bulging of Viscous Sheet Metal Brandon, J. F.;Lecoanet, H.;Oytana, C.
  10. Int. J. Mech. Sci. v.12 Superplastic Metal Forming Al-Naib, T. Y. M.;Suncan, J. L.
  11. Metal. Trans. A v.10A Mechanical Behavior and Hardening Characteristics of a Superplastic Ti-6Al-4V Alloy Chosh, A. K.;Hamilton, C. H.
  12. J. Mech. Work. Tech. v.14 A Mechanical Study of Superplastic Forming of Ti-6Al-4V Sheet Kuperfarb, G.;Bermain, Y.;Abouaf, M.
  13. v.5 Finite Elements. Special Problems in Solid Mechanics Oden, J. T.;Carey, G.T.
  14. 대한기계학회논문집 v.15 no.5 초소성 박판성형공정의 유한요소 압력제어 해석 허 훈;한수식;양동렬;이종수
  15. Proc. NUMIFORM '92 Superplastic Sheet Forming Analysis by the Finite Element Method with Directional Reduced Integration Huh, H.;Han, S. S.
  16. J. Mater. Process. Technol. v.49 no.3 Experimental Verification of Superplastic Sheet-Metal Forming Analysis by the Finite Element Method Huh, H.;Han, S. S.;Lee, J. S.;Hong, S. S.