An analysis of BER performance of LDPC decoder for WiMAX

WiMAX용 LDPC 복호기의 비트오율 성능 분석

  • Kim, Hae-Ju (School of Electronic Eng., Kumoh National Institute of Technology) ;
  • Shin, Kyung-Wook (School of Electronic Eng., Kumoh National Institute of Technology)
  • 김해주 (금오공과대학교 전자공학부) ;
  • 신경욱 (금오공과대학교 전자공학부)
  • Published : 2010.05.27

Abstract

In this paper, BER performance of LDPC(Low-Density Parity-Check) decoder for WiMAX is analyzed, and optimal design conditions of LDPC decoder are derived. The min-sum LDPC decoding algorithm which is based on an approximation of LLR sum-product algorithm is modeled and simulated by Matlab, and it is analyzed that the effects of LLR approximation bit-width and maximum iteration cycles on the bit error rate(BER) performance of LDCP decoder. The parity check matrix for IEEE 802.16e standard which has block length of 2304 and code rate of 1/2 is used, and AWGN channel with QPSK modulation is assumed. The simulation results show that optimal BER performance is achieved for 7 iteration cycles and LLR bit-width of (8,6).

본 논문에서는 WiMAX용 LDPC(Low-Density Parity Check) 복호기의 비트오율 성능 분석을 통해 최적 설계 사양을 도출하였다. LLR SPA(LLR Sum-Product Algorithm)을 근사화 시킨 최소합 알고리듬(Min-Sum Algorithm; MSA)을 Matlab으로 모델링한 후, 시뮬레이션을 통해 LLR 비트 폭과 최대 반복 복호 횟수에 따른 비트오율(Bit Error Rate; BER) 성능을 분석하였다. 모델링된 LDPC 복호기는 IEEE 802.16e 표준에 제안된 블록길이 2304, 부호화율 1/2인 PCM(Parity Check Matrix)을 사용하였으며, QPSK 변조와 백색 가우시안 잡음채널 하에서 시뮬레이션 하였다. 비트오율 성능을 분석한 결과, LLR 비트 폭은 (8,6)이고 반복 복호 횟수는 7인 경우에 비트오율 성능이 가장 우수함을 확인하였다.

Keywords