발포금속의 열전달 특성에 관한 실험적 연구

Study on the Heat Transfer Characteristic of Metallic Foam

  • 김필환 (경상대학교 기계항공공학부, 정밀기계공학과, BK21 친환경냉열에너지 기계연구사업팀) ;
  • 김미화 (경상대학교 기계항공공학부, 정밀기계공학과, BK21 친환경냉열에너지 기계연구사업팀) ;
  • 김영진 (경상대학교 기계항공공학부, 정밀기계공학과, BK21 친환경냉열에너지 기계연구사업팀) ;
  • 정효민 (경상대학교 기계항공공학부, 정밀기계공학과, BK21 친환경냉열에너지 기계연구사업팀) ;
  • 정한식 (경상대학교 기계항공공학부, 정밀기계공학과, BK21 친환경냉열에너지 기계연구사업팀)
  • Kim, Pil-Hwan (Department of Mechanical and Precision Engineering, school of mechanical and aerospace engineer Eco-Friendly Heat & Cold Energy Mechanical Research Team, BK21) ;
  • Jin, Mei-Hua (Department of Mechanical and Precision Engineering, school of mechanical and aerospace engineer Eco-Friendly Heat & Cold Energy Mechanical Research Team, BK21) ;
  • Kim, Young-Jin (Department of Mechanical and Precision Engineering, school of mechanical and aerospace engineer Eco-Friendly Heat & Cold Energy Mechanical Research Team, BK21) ;
  • Jeong, Hyo-Min (Department of Mechanical and Precision Engineering, school of mechanical and aerospace engineer Eco-Friendly Heat & Cold Energy Mechanical Research Team, BK21) ;
  • Chung, Han-Shik (Department of Mechanical and Precision Engineering, school of mechanical and aerospace engineer Eco-Friendly Heat & Cold Energy Mechanical Research Team, BK21)
  • 발행 : 2008.11.21

초록

To enhancement heat transfer performance, the metallic foam as heat exchanger was studied rapidly. This was attributed to its high surface area to volume ratio as well as intensive flow mixing by tortuous flow passages. So the experimental study about the heat transfer characteristic of metallic foam is presented in this paper. The material in this experiment was used as FeCrAl which has density of 10 ppi, 20 ppi and 30 ppi respectively. And the results show the heat transfer is rise with permeability Reynolds number increase and the pressure drop metallic foam was increased with the ppi increase.

키워드