• Korean Chemical Engineering Research
• /
• 제58권1호
• /
• pp.163-169
• /
• 2020

Synthesis of Fe-Co/meso-HZSM5 catalyst, intended to be applied in Fischer-Tropsch (FT) reaction was investigated. The study emphasized the effect of desilication agents, NaOH and KOH, on the catalyst materials properties. Impregnation composition of active metal (Fe and Co) was also examined. HZSM-5, converted from ammonium ZSM-5 through calcination, was treated with NaOH and KOH for desilication, followed by impregnation with 10% metal loading. Fe composition in the initial mixture was varied at 10-50% from total composition. After impregnation, reduction was applied by flowing hydrogen gas at 400 ℃ for 10 hours. The use of KOH solution induced greater mesoporous volumes; however, it had a detrimental effect on zeolite crystal structure. NaOH solutions, on the other hand, increased mesopore area as high as 100%, indicated from surface area increase from 266.28 m²/g of HZSM-5, to 526.03 m²/g of NaOH-desilicated HZSM-5. In addition, the application of NaOH solution increased pore volume from 0.14 cc/g to 0.486 cc/g. Further, more Fe-Co alloys and less oxide of iron (Fe₂O₃) as well cobalt (Co₃O₄) had been commonly observed in the produced catalysts. The largest Fe-Co alloys could be found in 50Fe-50Co/HZSM-5

• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.68-74
• /
• 2016

In this study, the fabrication of zeolite combined activated carbon spherical samples was carried out as follows. Briefly, ZSM-5 zeolite and activated carbon were composed as main absorbent materials; by controlling the weight percentage of zeolite and binder materials, a series of spherical samples (AZP 4, 6, 8) were prepared. These spherical samples were characterized by BET, XRD, SEM, EDX, and pressure drop; benzene and iodine adsorption tests, bactericidal effect test, and ignition temperature test were also performed. The adsorption capability was found to depend on the BET surface area; the spherical samples AZP6 with high BET surface area of $1011m^2/g$ not only exhibited excellent removal effects for benzene (24.9%) and iodine (920mg/g) but also a good bactericidal effect. The enhanced ignition temperature may be attributed to the homogeneous dispersion conditions and the proper weight percentage ratio between zeolite and activated carbon.

• 공업화학
• /
• 제31권1호
• /
• pp.57-60
• /
• 2020

An acetaldehyde, a representative food waste odor, was decomposed using a hybrid system comprised of a non-thermal plasma and catalyst at an ambient temperature under high humidity. A five wt.% Mn was impregnated on two differently structured microporous zeolites, namely Beta and ZSM-5, with a different molar ratio of SiO₂/Al₂O₃. Under high humidity conditions, the acetaldehyde degradation was higher in zeolites with the high ratio of SiO₂/Al₂O₃. Among studied catalysts, a five wt.% Mn/Beta (SiO₂/Al₂O₃ = 300) showed the highest acetaldehyde removal activity owing to its high hydrophobicity and reducibility. During long term stability test using the same catalyst for 110 hours, the acetaldehyde removal activity was relatively well-maintained.

• 멤브레인
• /
• 제9권2호
• /
• pp.97-106
• /
• 1999

조성이 각각 1.9 ${SiO}_2$-1.5 $Na_2O-Al_2O_3-40$ $H_2O$인 반응물과 $SiO_2-0.13 Na_2O-52$ $H_2O$-0.12 TPAOH 인 반응물로부터 다공성 지지판에 성장된 A 형 및 ASM-5형 제올라이트 결정박막을 합성하여 X 선회절분석기와 주사전자현미경으로 마그이 특성을 검토하였다. 알루미나 지지상에 붙어 성장한 ZSM-5gtud 제올라이트 결정은 치밀하게 서로 붙은 상태였다. A형 제올라이트는 지지체상에 치밀한 결정막으로 성장시키기가 어려웠으며, 반응시간을 연장시키면 물의 분리가 어려운 P형의 제올라이트결정막으로 전환되었다. 반응물을 조제할 때, 물은 첨가하지 않은 채로 혼합하고 디스크형으로 가압성형하여 100$^{\cirt}C$에서; 결정화시키면 단시간에 lcalf하게 성장된 A형 제올라이트 결정막을 합성할 수 있었다. 제조한 다공성 무기막들이 물과 알코올의 혼합액으로부터 물을 투과증발시키는 특성을 각각 검토하였다. 막으로 결정화시킨 A형 제올라이트는 미세세공의 분자체기능을 통하여 물과 알코올의 혼합수용랙에서 물만을 선택적으로 투과시키는 것을 알 수 있었다.

• 한국가스학회지
• /
• 제27권3호
• /
• pp.19-26
• /
• 2023

수소는 화석연료를 대체할 수 있는 COx-free 에너지원으로 사용량은 지속적으로 증가할 것이다. 수소는 단위 질량당 에너지 함량이 높으나, 낮은 저장 밀도와 장기 저장의 어려움으로 저장 및 운송에 한계가 존재한다. 반면, 암모니아는 단위 부피당 저장용량이 크고, 비교적 액화가 용이하여 대용량 수소를 저장 및 운송할 수 있는 수소 운반체로 주목받고 있다. 암모니아 분해를 통한 수소 생산 반응은 흡열반응으로 공정의 효율성 및 경제성을 위해 저온 활성이 우수한 촉매 개발이 요구된다. 본 연구에서는 활성금속 Ni의 고분산 담지를 위해 넓은 비표면적의 제올라이트를 지지체로 사용하였으며, 제올라이트 종류(5A, NaY, ZSM5)에 따른 특성(기공구조, 양이온, Si/Al-비)이 촉매 활성 및 반응 특성에 미치는 영향을 확인하였다. 5A 제올라이트는 표면, 기공, 구조체 내에 Ni 을 고분산 담지를 가능하게 하였으며, 낮은 Si/Al-비로 인한 풍부한 산점은 암모니아 흡착을 증가시켰다. 또한, 지지체에 포함된 Na과 Ca 양이온으로 인한 중간-염기점은 질소 탈착속도를 향상시켰다. 따라서, 15wt%Ni/5A 촉매는 강한 금속-지지체 상호작용과 중간-염기점을 통한 질소 탈착 속도 향상으로 가장 우수한 암모니아 전환율과 높은 수소 생성율 23.5 mmol/g_cat·min (30,000 mL/g_cat·h, 600 ℃)을 보였다.

• 공업화학
• /
• 제17권3호
• /
• pp.235-242
• /
• 2006

Liquid phase alkylation of biphenyl (BP) was studied over large pore zeolites. Selective formation of the least bulky products, 4,4'-diisopropylbiphenyl (4,4'-DIPB) occurred only in the isopropylation of BP over some large pore molecular sieves. H-mordenites (MOR) gave the highest selectivity among them. The dealumination of MOR enhanced catalytic activity and the selectivity of 4,4'-DIPB because of the decrease of coke-deposition. Non-selective catalysis occurs on external acid sites over MOR with the low $SiO_2/Al_2O_3$ ratio because severe coke-deposition deactivates the acid sites inside the pores by blocking pore openings. The selectivity of DIPB isomers was changed with reaction temperature. Selective formation of 4,4'-DIPB was observed at moderate temperatures such as $250^{\circ}C$, whereas the decrease of the selectivity of 4,4'-DIPB occurred at higher temperatures as $300^{\circ}C$. However, 4,4'-DIPB was almost exclusive isomer in the encapsulated DIPB isomers inside the pores even at high temperatures. These decreases of the selectivity of 4,4'-DIPB are due to the isomerization of 4,4'-DIPB on the external acid sites. Some 12-membered molecular sieves, such as SSZ-24, MAPO-5 (M:Mg, Zn, Si), SSZ-31, and ZSM-12, which have straight channels, gave 4,4'-DIPB with moderate to high selectivity; however; SSZ-55, SSZ-42, and MAPO-36 (M: Mg, Zn) gave lower selectivity because of cages in 12-membered one dimensional channels. Three dimensional H-Y and Beta zeolites also yield 4,4'-DIPB in low yield because of their wide circumstances for the isopropylation of BP. The increasing the size of alkylating agent enhanced the shape-selective alkylaiton even for the zeolites, such as UTD-1. The ethylation of BP to ethylbiphenyls (EBPs) and diethylbiphenyls (DEBPs) over MOR was non-selective. The ethylation of BP to EBPs was controlled kinetically. However, there was difference in reactivity of EBPs and DEBPs for their further ethylation. 4-EBP was ethylated preferentially among the isomers, although the formation of 4,4'-DEBP was less selective. The least bulky 4-EBP and 4,4'-DEBP have the highest reactivity among EBPs and DEBPs for the ethylation to polyethylbiphenyls (PEBPs). These results show that the environments of MOR pores are too loose for shape selective formation of the least bulky isomers, 4-EBP and 4,4'-DEBP in the ethylation of BP, and that MOR pores have enough space for the further ethylation of 4,4'-DEBP.