• Bulletin of the Korean Chemical Society
• /
• 제22권12호
• /
• pp.1309-1315
• /
• 2001

Zirconium sulfate supported on zirconia catalysts were prepared by impregnation of powdered $Zr(OH)_4$ with zirconium sulfate aqueous solution followed by calcining in air at high temperature. The characterization of prepared catalysts was performed using Fourier transform infrared (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and by the measurement of surface area. The addition of zirconium sulfate to zirconia increased the phase transition temperature of $ZrO_2$ from amorphous to tetragonal due to the interaction between zirconium sulfate and zirconia, and the specific surface area and acidity of catalysts increased in proportion to the zirconium sulfate content up to 10 wt% of $Zr(SO_4)_2$. Infrared spectra of ammonia adsorbed on $Zr(SO_4)2}ZrO_2$ showed the presence of Bronsted and Lewis acid sites on the surface. $10-Zr(SO_4)_2}ZrO_2$ calcined at $600^{\circ}C$ exhibited maximum catalytic activities for 2-propanol dehydration and cumene dealkylation. The catalytic activities for both reactions were correlated with the acidity of catalysts measured by ammonia chemisorption method.

• 열처리공학회지
• /
• 제18권5호
• /
• pp.288-296
• /
• 2005

The corrosion behaviors of Zr-based alloys were very sensitive to their microstructures which were determined by manufacturing process. The specimens of Zr-based alloy named as HANA-4 for nuclear fuel cladding were investigated in order to get the optimized manufacturing process such as the intermediate annealing temperature and cold working steps after the ${\beta}$ quenching. From the microstructural analysis, cold worked microstructure of the samples was changed to the recrystallized microstructure by performed process. The corrosion behaviors of HANA-4 alloy were affected by the different manufacturing process. The ${\beta}$-Zr phase was formed in the matrix and the Nb concentration in the ${\beta}$-Zr phase was increased as progressing the manufacturing process. So, it was found that the corrosion rate of HANA-4 alloy was affected by the Nb concentration in the matrix.

• 한국세라믹학회지
• /
• 제28권4호
• /
• pp.315-323
• /
• 1991

The preparation of zirconium carbide powders by the halogenide process of ZrCl4-C-Mg system (1:1:2, molar ratio) was studied between 300。 and 120$0^{\circ}C$ under Ar gas flow (200 mι/min). The formation mechanism and kinetics of zirconium carbide and characteristics of the synthesized powder were examined by TG-DTA, XRD, SEM and PSA. 1) The formation mechanism of zirconium carbide were as follows, above 30$0^{\circ}C$ ZrCl4(S)+Mg(s)longrightarrowZrCl2(s)+MgCl2(s) above 40$0^{\circ}C$ ZrCl2(S)+Mg(s)longrightarrowZr(s)+MgCl2(s) above 50$0^{\circ}C$ Zr(s)+C(s)longrightarrowZrC(s) 2) The apparent activation energy of the reduction-carbonization at temperature of 800$^{\circ}$to 100$0^{\circ}C$ was 11.9 kcal/mol. 3) The lattice parameter and the crystallite size of ZrC which was produced from the mixture powder of ZrCl4, C and Mg (1:1:2, molar ratio) at 100$0^{\circ}C$ for 1 h were 4.700A and 180A, respectively. 4) The powders obtained from the mixture powder of ZrCl4, C and Mg(1:1:2, molar ratio) at 100$0^{\circ}C$ for 1 h were agglomerate with the average size of about 13${\mu}{\textrm}{m}$ in SEM micrograph.

• 대한화학회지
• /
• 제63권1호
• /
• pp.37-44
• /
• 2019

N,N'-bis(ethyldihydrogen phosphate)-1,4,5,8-naphthalene bis(dicarboximide) (EPNI) and N,N'-bis(ethyldihydrogen phosphate)-3,4,9,10-perylene bis(dicarboximide) (EPPI) and their zirconium bisphosphate multilayers (Zr-EPNI and Zr-EPPI), that had been briefly reported by us, were further investigated in terms of their electrochemical properties. EPNI in aqueous solution showed typical two reversible reductions at ITO electrode but the reductions were strongly dependent on solution pH while EPPI showed only an irreversible reduction. The single and mixed multilayers of Zr-EPNI and Zr-EPPI were well constructed on ITO electrode by the alternate adsorptions of zirconium ion and the bisimides. While Zr-EPNI multilayer on ITO electrode showed single broad reversible reduction with $E_{1/2}=-0.68V$, Zr-EPPI gave two separated reductions at $E_{1/2}=-0.54$ and -0.81 V vs SCE, quite differently from the solution properties. The average layer densities of the multilayers were estimated as $1.5{\times}10^{-10}$ and $2.3{\times}10^{-10}mol/cm^2$ for Zr-EPNI and Zr-EPPI, respectively. Both the monolayers of Zr-EPNI and Zr-EPPI could not completely block the electron transfer between $Fe(CN){_6}^{3-}$ in solution and ITO electrode but 3-5 layers of Zr-EPNI and Zr-EPPI could block it completely and mediated the one-way electron transfer at the potential shifted to their reduction potentials. When the monolayer of zirconium 1,10-decanediylbisphosphonate (Zr-DBP) was used as a sublayer of Zr-EPNI and Zr-EPPI layers, the mediated electron transfer became prominent without any direct electron transfer.

• 한국재료학회지
• /
• 제31권12호
• /
• pp.690-696
• /
• 2021

The purpose of this study is to develop a zirconium-based alloy with low modulus and magnetic susceptibility to prevent the stress-shielding effect and the generation of artifacts. Zr-7Cu-xSn (x = 1, 5, 10, 15 mass%) alloys are prepared by an arc melting process. Microstructure characterization is performed by microscopy and X-ray diffraction. Mechanical properties are evaluated using micro Vickers hardness and compression test. The magnetic susceptibility is evaluated using a SQUID-VSM. The average magnetic susceptibility value of the Zr-7Cu-xSn alloy is 1.176 × 10^-8 cm³g^-1. Corrosion tests of zirconium-based alloys are conducted through polarization test. The average Icorr value of the Zr-7Cu-xSn alloy is 0.1912 ㎂/cm². The elastic modulus value of 14 ~ 18 GPa of the zirconium-based alloy is very similar to the elastic modulus value of 15 ~ 30 GPa of the human bone. Consequently, the Sn added zirconium alloy, Zr-7Cu-xSn, is very interesting and attractive as a biomaterial that reduces the stress-shielding effect caused by differences of elastic modulus between human bone and metallic implants. In addition, this material has the potential to be used in metallic dental implants to effectively eliminate artifacts in MRI images due to low magnetic susceptibility.

• Korean Chemical Engineering Research
• /
• 제45권4호
• /
• pp.378-383
• /
• 2007

Zirconium titanate($Zr_xTi_{1-x}O_2$)와 같은 다성분계 금속산화물의 박막을 형성함에 있어 비교적 저온에서 박막성분 간의 정확한 조성조절이 이루어지며 균일한 박막특성을 같게 하는 새로운 박막제조 공정방법을 제시하였다. 이 공정방법은 우선 다성분계 금속산화박막을 구성하는 단성분계 금속산화막들을 적층식구조로 형성하여 적절한 열처리로 고상확산 반응을 통한 단일상 다성분계 박막을 형성하는 것을 특징으로 한다. 본 연구에서는 단성분계 산화박막층을 형성하는 방법으로 나노두께의 박막을 형성할 수 있는 능력과 두께조절성이 우수한 PRTMOCVD(pulsed rapid thermal metalorganic chemical vapor deposition) 법이 개발 적용하였다. PRTMOCVD 법으로 $ZrO_2$와 $TiO_2$ 단성분 산화막의 두께를 제어하면서 교차로 적층시킨 후 $850^{\circ}C$의 질소분위기에서 30분간 열처리를 통한 박막간의 상호확산을 통해 $Zr_xTi_{1-x}O_2$ 다성분계 산화박막을 형성하였다. 박막내의 Zr과 Ti의 조성은 $ZrO_2$와 $TiO_2$ 단성분 산화막의 두께로 조절하였다. 형성된 $Zr_xTi_{1-x}O_2$ 박막에 대한 상세한 물성을 분석하였다.

• 자원리싸이클링
• /
• 제21권6호
• /
• pp.32-38
• /
• 2012

본 연구에서는 액상 칼슘에 의한 $ZrO_2$의 직접환원에 대하여 조사하였다. $ZrO_2$의 직접환원에 미치는 Ca과 $ZrO_2$의 몰비, 반응시간, 그리고 반응온도의 영향에 대하여 검토하였다. 실험은 5분에서 60분까지 Ar 분위기의 밀폐된 스테인리스강제의 반응기에서 실시하였다. 반응온도 1223 K, Ca과 $ZrO_2$의 몰비가 3 이상인 조건에서 대부분의 $ZrO_2$는 5분만에 Zr으로 환원되었다. 반응온도가 1337 K이고 Ca을 이론적인 양의 2배를 첨가한 경우 금속 Zr 중의 산소농도는 최저 0.66 wt%를 나타내었다. 그리고 Zr 입자의 형상은 반응온도와 반응시간에 큰 영향을 받는 것으로 나타났다.

• The Journal of Advanced Prosthodontics
• /
• 제6권6호
• /
• pp.512-520
• /
• 2014

PURPOSE. The purpose of this study was to assess the surface characteristics and the biocompatibility of zirconium (Zr) coating on Ti-6Al-4V alloy surface by radio frequency (RF) magnetron sputtering method. MATERIALS AND METHODS. The zirconium films were developed on Ti-6Al-4V discs using RF magnetron sputtering method. Surface profile, surface composition, surface roughness and surface energy were evaluated. Electrochemical test was performed to evaluate the corrosion behavior. Cell proliferation, alkaline phosphatase (ALP) activity and gene expression of mineralized matrix markers were measured. RESULTS. SEM and EDS analysis showed that zirconium deposition was performed successfully on Ti-6Al-4V alloy substrate. Ti-6Al-4V group and Zr-coating group showed no significant difference in surface roughness (P>.05). Surface energy was significantly higher in Zr-coating group than in Ti-6Al-4V group (P<.05). No difference in cell morphology was observed between Ti-6Al-4V group and Zr-coating group. Cell proliferation was higher in Zr-coating group than Ti-6Al-4V group at 1, 3 and 5 days (P<.05). Zr-coating group showed higher ALP activity level than Ti-6Al-4V group (P<.05). The mRNA expressions of bone sialoprotein (BSP) and osteocalcin (OCN) on Zr-coating group increased approximately 1.2-fold and 2.1-fold respectively, compared to that of Ti-6Al-4V group. CONCLUSION. These results suggest that zirconium coating on Ti-6Al-4V alloy could enhance the early osteoblast responses. This property could make non-toxic metal coatings on Ti-6Al-4V alloy suitable for orthopedic and dental implants.

• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.50-55
• /
• 2016

In order to make a highly ordered three-dimensionally macro-porous structure of zirconia ceramics, porogen precursors PMMA beads were prepared by emulsion polymerization using acrylic monomer. The monodisperse PMMA latex beads were closely packed by centrifugation as a porogen template for the infiltration of zirconium acetate solution. The mixed compound of PMMA and zirconium acetate was dried. According to the firing schedule, dry compacts of PMMA and zirconium acetate were calcined at $475^{\circ}C$ to obtain micro-, macro-, and meso- structures of polycrystalline zirconia with monodispersed porosity. Inorganic frameworks composed of $ZrO_2$ were formed and showed a three Dimensionally Ordered Microstructure [3DOM] of $ZrO_2$ ceramics. The obtained $ZrO_2$ skeleton was calcined at $710^{\circ}C$. The 3DOM $ZrO_2$ skeleton showed color tuning in solutions such as deionized [DI] $H_2O$ and/or methanol. The monodispersed crystalline micro-structure with micro/meso porosity was observed by FE-SEM.

• 열처리공학회지
• /
• 제34권4호
• /
• pp.165-170
• /
• 2021

Zirconium has excellent mechanical strength and high heat resistance and excellent corrosion resistance, and it is very important to study zirconium's dissimilar welding properties since it can be used in various applications under harsh environments. Similar welding of pure zirconium and dissimilar metal welding of pure zirconium and pure titanium were performed by TIG welding, and the welding properties were studied in association with microstructural and mechanical properties. In the Zr/Zr welded specimen, sound FZ and HAZ regions showed a basketweave microstructure composed of plate α phase. FZ region of Zr/Ti dissimilar welded specimen exhibited a maximum hardness value of 354.8 Hv, which is about three times higher than that of Ti base metal, due to the precipitation of very fine metastable ω and α phases in the beta matrix. In addition, due to the microstructural continuity in the FZ and HAZ regions, excellent elongation property of 21% was exhibited.