• Investigative Magnetic Resonance Imaging
• /
• 제4권2호
• /
• pp.113-119
• /
• 2000

목적 : 산소호흡을 이용한 뇌의 관류 자기공명영상의 임상적용 가능성을 알고자 하였다. 대상 및 방법 정상 성인 지원자 2명과 3명의 환자, 각각 모야모야병 환자 1명, 뇌경색환자 1명, 뇌수막종 환자 1명을 대상으로 하였으며, 1.5 Tesla의 자기공명영상 장치를 이용하여 뇌의 자화율 대조 (susceptibility contrast) echo planar image (EPI) 방법으로 뇌영역을 10 slice씩 25회(검사시간은 검사당 1.6초) 영상을 얻었다. 검사자는 안면마스크를 착용한 상태로 스캔 시작 8초 후부터 35초가지 산소 15 liter/min를 실내 공기와 혼합되어 흡입되도록 하였다. 획득된 영상을 Magnetom Vision (Siemens Medical Systems, Erlangen, Germany)의 VB31C 프로그램을 이용하여 산소투여전(3골 번째 검사)과, 산소투여 후의 초기 (12-18 번째 검사)와 후기(19-25 번째 검사) 군으로 나누었다. 초기 및 후기 군과 산소투여전 군의 신호차이는 Z-score 0.7 내지 1.0으로 하여 여러번 영상후 처리를 반복하여 difference map을 얻어서, T1 강조영상에 중첩시켜 관류 영상을 얻었다. 모야모야병 환자는 추가로 Gd-DTPA를 0.1 mmol/kg급속주사 후 동일한 방법으로 관류 영상을 얻어 산소호흡에 의한 관류 영상과 비교하였다. 결과 : 산소 공급 후에 시행한 자화율 대조 EPI 방법으로 2명의 지원자와 각각 1예의 모야모야병, 뇌경색, 뇌수막종 증례에서 혈류 분포를 반영하는 관류 영상을 얻을 수 있었다. 모야모야병 1예의 산소 호흡에 의한 관류 영상은 Gd-DTPA투여후의 관류 영상과 유사한 양상을 보였다. 결론 : 산소호흡을 이용한 자화율 대조 EPI 방법은 향후 뇌의 관류 자기공명영상 방법으로 적용이 가능하리라고 생각된다.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.53-60
• /
• 2002

Motion of lung tumors from respiration has been reported in the literature to be as large as of 1-2 cm. This motion requires an additional margin between the Clinical Target Volume (CTV) and the Planning Target Volume (PTV). While such a margin is necessary, it may not be sufficient to ensure proper delivery of Intensity Modulated Radiotherapy (IMRT) to the CTV during the simultaneous movement of the DMLC. Gated treatment has been proposed to improve normal tissues sparing as well as to ensure accurate dose coverage of the tumor volume. The following questions have not been addressed in the literature: a) what is the dose error to a target volume without gated IMRT treatment\ulcorner b) what is an acceptable gating window for such treatment. In this study, we address these questions by proposing a novel technique for calculating the 3D dose error that would result if a lung IMRT plan were delivered without gating. The method is also generalized for gated treatment with an arbitrary triggering window. IMRT plans for three patients with lung tumor were studied. The treatment plans were generated with HELIOS for delivery with 6 MV on a CL2100 Varian linear accelerator with a 26 pair MLC. A CTV to PTV margin of 1 cm was used. An IMRT planning system searches for an optimized fluence map ${\Phi}$ (x,y) for each port, which is then converted into a dynamic MLC file (DMLC). The DMLC file contains information about MLC subfield shapes and the fractional Monitor Units (MUs) to be delivered for each subfield. With a lung tumor, a CTV that executes a quasi periodic motion z(t) does not receive ${\Phi}$ (x,y), but rather an Effective Incident Fluence EIF(x,y). We numerically evaluate the EIF(x,y) from a given DMLC file by a coordinate transformation to the Target's Eye View (TEV). In the TEV coordinate system, the CTV itself is stationary, and the MLC is seen to execute a motion -z(t) that is superimposed on the DMLC motion. The resulting EIF(x,y)is inputted back into the dose calculation engine to estimate the 3D dose to a moving CTV. In this study, we model respiratory motion as a sinusoidal function with an amplitude of 10 mm in the superior-inferior direction, a period of 5 seconds, and an initial phase of zero.

• 한국자원식물학회지
• /
• 제36권4호
• /
• pp.299-313
• /
• 2023

석죽과에 속하는 모래별꽃[Stellaria pallida (Dumort.) Crép.], 들별꽃(S. ruderalis M. Lepší, P. Lepší, Z. Kaplan & P. Koutecký)과 애기점나도나물(Cerastium pumilum Curtis) 이 서울과 경기도에서 발견되었다. 모래별꽃은 화판이 악편보다 훨씬 작거나 없는 특징으로 동속 분류군들과 쉽게 구분이 되는 반면, 들별꽃은 별꽃(S. media)과 초록별꽃[S. neglecta(Lej.) Weihe]의 중간형질을 보이는 분류군으로 종식별의 어려움이 있으나 종자의 형태로 뚜렷이 구분된다. 들별꽃의 종자는 별꽃, 초록별꽃과 달리 가장자리에 있는 병층벽이 원뿔형이고, 병층벽의 기부쪽 표면에만 돌기가 있다. 애기점나도나물은 같은 아속(Sub gen. Fugacia)에 속하는 유럽점나도나물(C. glomeratum Thuill.)과 매우 유사하지만, 수술은 주로 8개(5-10개)이고, 위쪽의 포엽은 가장자리가 막질이며, 악편은 소화경과 화판보다 짧은 특징이 있어 구별된다. 본 연구에서는 모래별꽃, 들별꽃, 애기점나도나물의 보고와 함께 이들의 자생지, 형태학적 기재, 분포도, 화상자료 및 검색표를 제시하였다.

• 한국습지학회지
• /
• 제26권1호
• /
• pp.51-61
• /
• 2024

본 연구는 전라남도 고흥군 소재 우량 산림습원 2개소를 대상으로 군락구조를 파악하고 그에따른 천이경향을 구명하고자 수행되었다. 2023년 5월부터 10월까지 Z-M학파의 식물사회학적 방법에 의해 식생조사를 실시하였고 이 자료를 토대로 군락을 분류하여 현존식생도를 작성하였다. 그 결과, 골풀아재비군락, 꽝꽝나무-진퍼리새군락, 오리나무진퍼리새군락, 진퍼리새군락, 오리나무-소나무군락, 오리나무군락의 총 6개 군락으로 분류되었다. 각 층위별 중요치를 분석한 결과, 골풀아재비군락에서는 절대습지식물인 골풀아재비의 중요치가 높게 나타났으며 나머지 5개 군락의 아교목층과 관목층에서는 습지의 극상종인 오리나무, 절대육상식물인 소나무와 꽝꽝나무가, 초본층에서는 중간습원의 대표종인 진퍼리새의 중요치가 높게 나타났다. 조사지 내 출현한 모든 관속식물을 습지선호도에 따라 분류한 결과, 골풀아재비군락에서는 절대습지식물의 출현율이 높게 나타났으나 나머지 5개 군락에서는 절대육상식물의 출현율이 높게 나타났다. 골풀아재비군락을 제외한 나머지 5개 군락에서는 우량 산림습원을 구성하는 식물 중 육상식물의 출현비율이 높고, 습지가 건조화되는 단계에서 나타나는 진퍼리새가 번성하고 있어 습지의 천이 및 육화가 진행되고 있는 것으로 판단되었다.

• 한국환경생태학회지
• /
• 제31권3호
• /
• pp.318-328
• /
• 2017

내연산일대 산림식생의 생태적 관리를 위한 기초자료 제공을 목적으로 Z.-M.학파의 식물사회학적 방법으로 총 149개의 표본조사구에서 식생조사를 실시하여 식생유형을 구분하고 그 생태적 특성을 파악하였다. 산림식생은 종조성 측면에서 총 10개 유형으로 구분되었고 2개 군락군, 4개 군락, 6개 아군락 그리고 6개 변군락의 단위체계를 가지고 있었다. 상층 우점종에 의한 상관식생은 총 19개 유형으로 구분되었고 이 중 자연식생은 신갈나무군락, 소나무군락, 망개나무군락, 헛개나무군락 등 18개 유형 그리고 인공식생은 일본잎갈나무림 1개 유형이었다. 구성종의 중요치 분석 결과 잠재자연식생 요소인 신갈나무가 다른 구성종에 비하여 대부분의 임분에서 상대적으로 중요치가 높게 나타나 인위적 간섭이 없는 한 일부 입지를 제외하고 대부분 신갈나무군락으로의 변화가 예상되었다. 산림식생의 공간분포 특성을 파악하기 위하여 상층 우점종에 의해 1/5,000 대축척 현존상관식생도를 작성한 결과, 자연식생이 98.2%로 대부분을 차지하고 있었으며, 식생 패치수는 733개 그리고 패치당 평균면적은 3.93ha로 나타났다.

• 한국환경복원기술학회지
• /
• 제22권5호
• /
• pp.1-12
• /
• 2019

It is important to measure the height of trees as an essential element for assessing the forest health in urban areas. Therefore, an automated method that can measure the height of individual tree as a three-dimensional forest information is needed in an extensive and dense forest. Since airborne LiDAR dataset is easy to analyze the tree height(z-coordinate) of forests, studies on individual tree height measurement could be performed as an assessment forest health. Especially in urban forests, that adversely affected by habitat fragmentation and isolation. So this study was analyzed to measure the height of individual trees for assessing the urban forests health, Furthermore to identify environmental factors that affect forest growth. The survey was conducted in the Mt. Bongseo located in Seobuk-gu. Cheonan-si(Middle Chungcheong Province). We segment the individual trees on coniferous by automatic method using the airborne LiDAR dataset of the two periods (year of 2016 and 2017) and to find out individual tree growth. Segmentation of individual trees was performed by using the watershed algorithm and the local maximum, and the tree growth was determined by the difference of the tree height according to the two periods. After we clarify the relationship between the environmental factors affecting the tree growth. The tree growth of Mt. Bongseo was about 20cm for a year, and it was analyzed to be lower than 23.9cm/year of the growth of the dominant species, Pinus rigida. This may have an adverse effect on the growth of isolated urban forests. It also determined different trees growth according to age, diameter and density class in the stock map, effective soil depth and drainage grade in the soil map. There was a statistically significant positive correlation between the distance to the road and the solar radiation as an environmental factor affecting the tree growth. Since there is less correlation, it is necessary to determine other influencing factors affecting tree growth in urban forests besides anthropogenic influences. This study is the first data for the analysis of segmentation and the growth of the individual tree, and it can be used as a scientific data of the urban forest health assessment and management.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.667-670
• /
• 2005

Ground control points(GCPs) can be extracted from SAR data given precise orbit for DTM generation using optic images and other SAR data. In this study, we extract GCPs from ERS SAR data and SRTM DEM. Although it is very difficult to identify GCPs in ERS SAR image, the geometry of optic image and other SAR data are able to be corrected and more precise DTM can be constructed from stereo optic images. Twenty GCPs were obtained from the ERS SAR data with precise Delft orbit information. After the correction was applied, the mean values of planimetric distance errors of the GCPs were 3.7m, 12.1 and -0.8m with standard deviations of 19.9m, 18.1, and 7.8m in geocentric X, Y, and Z coordinates, respectively. The geometries of SPOT stereo pair were corrected by 13 GCPs, and r.m.s. errors were 405m, 705m and 8.6m in northing, easting and height direction, respectively. And the geometries of RADARS AT stereo pair were corrected by 12 GCPs, and r.m.s. errors were 804m, 7.9m and 6.9m in northing, easting and height direction, respectively. DTMs, through a method of area based matching with pyramid images, were generated by SPOT stereo images and RADARS AT stereo images. Comparison between points of the obtained DTMs and points estimated from a national 1 :5,000 digital map was performed. For DTM by SPOT stereo images, the mean values of distance errors in northing, easting and height direction were respectively -7.6m, 9.6m and -3.1m with standard deviations of 9.1m, 12.0m and 9.1m. For DTM by RADARSAT stereo images, the mean values of distance errors in northing, easting and height direction were respectively -7.6m, 9.6m and -3.1m with standard deviations of 9.1m, 12.0m and 9.1m. These results met the accuracy of DTED level 2

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.2001-2011
• /
• 1993

This study deals with the machining of sculptured surfaces on 5-axis CNC milling machine with end mill cutter. The study (I) has the following contents. In 5-axis CNC milling, CL-data consist of CC-data and cutter axis direction vector at the CC-point. Thus, in machining of the sculptured surface on 5-axis CNC milling machine, determination of the direction vector of the milling cutter is very important. The direction vector is obtained by the fact that bottom plane of the milling cutter must not interfere with the free-form surface being machined. The interference is checked by the z-map method which can be applied in all geometric types of the sculptured surfaces. After generating NC part programs from 5-axis post-processing algorithms, sculptured surfaces were machined with 5-axis CNC milling machine (CINCINNATI MILACRON, 20V-80). From these machining tests, it was shown that the machining of the free-form surfaces on 5-axis CNC milling machine with the end mill has smaller cusp heights and shorter cutting time than on 3-axis CNC milling machine with the ball-end mill. Thus, 5-axis CNC end milling was effective machining method for sculptured surfaces. The study (II) deals with the prediction of cusp height and the determination of tool path interval for the 5-axis machining of sculptured surfaces on the basis of study(I).

• 한국환경농학회지
• /
• 제28권4호
• /
• pp.365-370
• /
• 2009

The aim of this study was to investigate the vegetation types of Minarimot, in Jeju Islands. The vegetation types were classified by the Z-M school method and cluster analysis. The vegetation in Minarimot was classified into 6 communities and 2 subcommunities: Persicaria thunbergii-Isachne globosa community (vegetation type: A), Scirpus tribangulatus-Eleocharis manillata var. cyclocarpa community (B) (Aneilema keisak subcommunity (B-1) and Caldesia parnassifolia-Potamogeton distinctus subcommunity (B-2)), Eleocharis kuroguwai community (C), Phragmites communis community (D), Scirpus tabernaemontani community(E) and Typha orientalis community (F). These communities were grouped into three main categories according to cluster analysis. The community (A) established at the edge of the wetland which has the driest condition was distinguished as Group I, while the community (B) emerged in the submerged zone was distinguished as Group III. The Group II was designated as the communities (C, D, E, F) between Group I and III, whose communities were occasionally submerged. The result of principal coordinate analysis (PCoA) appeared that the different vegetation established along the wetland were depending on water environment such as water depth and the period submerged.

• 한국조경학회지
• /
• 제28권6호
• /
• pp.62-76
• /
• 2001

This study is to offer the basic information and materials for the restoration of the urban forest and the ecologically healthy and continuous green belt through the investigation and the analysis on the vegetation in Hwasan Park, Chonju-City. The flora of Hwasan Neighborhood park was composed of 86 families 230 genera, 261 species, 35 varieties, 1 formae or 298 Taxa. Among them, calculation of Pte-Q Index represented 0.60, Fisher's Index. Some characteristics of the plants in this area have represented such as Th-D1-R5 type in biological type, erect form(64.6%) in growth type, 30 taxa in naturalized plants. The life form spectra investigated from Hwasan neighborhood park was recognized as the following M"17.4%, N:11.4%, E:0.3%, Ch:0%, H:29.8%, G:6.7%, HH:0%, Th:34.2%. By the Z-M method 5 plant communities and 3 afforestation were recognized; Quercus variabilis community, Q.acutissima community, Q.serrata community, Sorbus alnifolia community, Pinus densiflora community, P.rigida afforestation, Robinia pseudo-acacia afforestation and Larix leptolepis afforestation. The actual vegetation map constructed on the grounds of the communities classified and other data. The pattern of successional trend of tree species might be suggested: L. leptoleipis, P. rigida and P. densifloralongrightarrowQ.variabilis and Q.acutissimalongrightarrowS.alnifolia and Q.serratalongrightarrowCarpinus tschonoskii community. Three measurements of species diversity (richness index(SR), Shannon-Wiener index(H'), evenness index(J')) and their relationship with community type were studied in the surveyed plant communities. Q.serrata community was higher in SR, H', J' than the other communities, whereas R.pseduo-acacia afforestation was low. Finally, The vegetation of the Hwasan neighborhood park must not allowed any more. Nothing ca be better than native states in preserving the ecosystems.tems.