• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.275-276
• /
• 2013

In this paper, we proposed the Z-source four-switch three-phase rectifier. As we know, the conventional Four-Switch Three-Phase Rectifier(FSTPR) has advantages of the lower cost and less complex switching control. However, The conventional FSTPR can only either perform buck or boost operation, it can only attain the buck-boost operation by adding another DC-DC converter. In addition, besides its narrow output voltage region, distortion of the input current is serious either. Thus, we proposed the Z-source FSTPR which has buck-boost function and better input current waveform by applying the Z-impedance network to the conventional FSTPR. The validity of the proposed system was confirmed by experiments.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.632-636
• /
• 2006

본 연구에서는 레이더 강수를 산정하는 기법을 비교.분석하고자 하였다. 레이더 강수산정기법의 비교는 레이더 반사도를 강우강도로 변환시키는 두가지 Z-R 관계식 산정방법을 기준으로 구분하여 수행하였다. Z-R 관계식 산정방법 중 첫번째는 지상강우계와 대응되는 레이더 격자 사이의 관계를 통해서 Z-R 관계식을 산출하여 레이더 강수를 산정하는 Least-Square Fitting 방법이고, 두번째 방법은 강우량계에서 관측된 강우량과 이에 근접한 영역에서 얻은 레이더 반사도 자료 각각의 확률밀도함수를 대응시켜 Z-R 관계식을 산출하는 WPMM(Window Probability Matching Method)을 적용하는 방법이다. 이 두 방법의 비교를 위해 2003년 6월에서 8월사이의 두 강우사상을 선택하여 Z-R 관계식을 산정하였으며, 산정된 Z-R 관계식으로 추정된 레이더 강수의 기상학적 검증을 통해 정성적.정량적으로 검토하였다. 한반도 전역에 대하여 산정된 레이더 추정강수를 검토한 결과 대체적으로 정확도 및 상관성 측면에서 WPMM 방법이 Least-Square Fitting 방법보다 정확한 것으로 나타났다. 또한, 도시 유역의 홍수예경보에 적합한 레이더 강수산정기법을 파악하고자 중랑천 유역의 레이더 강수를 수문학적으로 분석한 결과 WPMM 방법이 보다 유효한 것으로 검토되었다.

• Information and Communications Magazine
• /
• v.22 no.9
• /
• pp.164-174
• /
• 2005

본 논문은 비동기 방식의 WCDMA 시스템에서 특히 IP Multimedia Subsystem의 도입과 함께 IP Security 기술이 어떤 형식으로 적용되어 표준화되고 있는지 기술동향을 알아보고자 한다. 현재 WCDMA 시스템에서의 IP Security 기술은 일반 네트워크 영역 보안 분야와 WLAN Inter-working 분야 그리고 IMS 보안 분야에 적용되고 있다. 가장 기본이 되는 네트워크 영역 보안은 3GPP 표준화 규격인 TS 33.210에 정의되어 있고, 이를 바탕으로 WLAN Inter-working 분야에서는 IKE version 2가 추가되었으며, IMS 보안 분야에서는 네트워크 영역 보안에서 정의된 Z 인터페이스를 이용하여 해당 트래픽에 대한 보안을 수행한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.36-43
• /
• 1987

Stress intensity factors are computed by the boundary element method employing the multiregion technique along with the double-point concept. To demonstrate the validity of the current method, the stress intensity factors of the well-known simple models such as a slanted edge crack and an arcular crack are determined, in advanced, which are proved to be in good agreement within 5% with the pre-existing solutions. Z-shaped cracks are analyzed with various branch crack lengths and branching angles.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.2
• /
• pp.299-304
• /
• 2003

Static mixer consists of a straight pipe of circular cross section into which individual elements are inserted to cut, fold, twist and re-combine the mixing fluid. The number of elements and their shape required in any application depend on the complexity of the mixing process. The objectives of this study are to develop a new static mixer and to perform the experimental investigation of pressure drop in order to evaluate the performance of the new one. The mixing fluid used is Glycerin. The pressure drop is measured using a hydraulic manometer and the correlation of Z-factor is suggested as a function of Re. The Z-factors of SSC and YNU mixer are about 40% lower than and 4% higher than that of the Sulzer one.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.6
• /
• pp.296-301
• /
• 2002

Modern power systems are very complex and to model them completely is impractical for electromagnetic transient studies. Therefore areas outside the immediate area of interest must be represented by some form of Frequency Dependent Network Equivalent (FDNE). In this paper a method for developing Frequency Dependent AC system Equivalent (FDACSE) using Z-domain rational Function Fitting is presented and demonstrated. The FDACSE is generated by Linearized Least Squares Fitting(LSF) of the frequency response of a Z-domain formulation. This 1 & 2 port FDACSE have been applied to the New Zealand South Island AC power system. The electromagnetic transient package PSCAD/EMTDC is used to assess the transient response of the 1 & 2 port FDACSE developed under different condition (linear load, fault and nonlinear loading). The study results have indicated the robustness and accuracy of 1 & 2 port FDACSE for electromagnetic transient studies.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10b
• /
• pp.285-290
• /
• 2007

본 논문에서 구현하고자 하는 유비쿼터스 컴퓨팅 응용에 필요한 위치 인식 시스템의 주 요소는 블루투스 프로토콜 스택(BlueZ)에서 제공하는 RSSI(Received Signal Strength Indicator) 값을 측정하는 블루투스 AP, 측정된 RSSI 값을 위치 인식 서버에 전달하기 위한 무선 AP 공유기 그리고, 받은 데이터로 위치 값을 측정하는 위치 인식 서버 및 Context Broker(고 수준의 상황 정보를 추론하는 서버 역할)로 이루어져있다. 전체적인 동작 시스템은 위치 값을 측정하고자 하는 이동 매제(마스터)를 중심으로 최대 여덟 개까지 네트워크가 가능한 블루투스 AP(슬레이브)장치로 구성된 피코넷(Piconet) 영역에서 삼각측량 필요에 적절한 세 개의 블루투스 AP를 RSSI값을 이용하여 분류 한 후 이동 매체의 위치를 측정한다. 그 결과로 나온 데이터는 피코넷 영역에서 가장 가까운 무선 AP 공유기를 거쳐서 위치 값을 측정하는 위치 인식 서버에 전달한 후, 그 결과 값으로 Context Broker에서 상황 정보를 추론해서 Community Manager에서 유비쿼터스 컴퓨팅 응용에 맞게 서비스를 구현한다. 또한, 위와 같은 시스템 내부 구조 된 데이터처리는 리눅스 운영체제 내에서 디바이스 드라이버와 사용자 프로그램으로 구현된다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.4
• /
• pp.322-332
• /
• 2013

Conventional single-phase series quasi Z-source voltage compensator can not compensate for voltage sag less than 50% that frequently occurs in the industrial field. In this study, single-phase series quasi Z-source voltage sag-swell compensator which can compensate the voltage variation of entire range is proposed. The proposed system is composed of two quasi Z-source AC-AC converters connected in series with output terminal stage. Voltage sag less than 50% could be compensated by the intersection switching control of the upper converter duty ratio and of the upper converter duty ratio. Also the compensation voltage and its flowchart for each compensation mode are presented for entire sag-swell region. To confirm the validity of the proposed system, a DSP(DSP28335) controlled experimental system was manufactured. As a result, the proposed system could compensate for the voltage sag/swell of 20% and 60%. Finally, voltage compensation factor and THD(Total Harmonic Distortion) according to voltage variation and load change were measured, and voltage quality shows a good results.

• Korean Journal of Optics and Photonics
• /
• v.9 no.5
• /
• pp.342-347
• /
• 1998

We present a theoretical analysis of Gaussian beam propagation in nonlinear Kerr media by using aberration-free approximation and Huygens-Fresnel diffraction integral and obtain a simple analytic formular for Z-scan characteristics. Z-scan experiments are carried out on amorphous $As_2S_3$ thin film and compared with the theory developed, showing good agreement. The sign and the value of ${\gamma}$ have been measured at 633 nm to be $+8.65{\times}10^{-6}\textrm{cm}^2/W$. We also measured the far-field intensity profiles, which confirm again self-focusing effect.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.5
• /
• pp.69-74
• /
• 1985

In this paper five-order Butterworth Low pass active RC filter is designed by using FDNR (Frequency Dependent Ncgative Resistor) Method from LC ladder filter having the lowest sensitivity. In process of Transformation to SCF (Switched Capacitor Filter) from active RC filter, Bilinear Z Transfomation method is utilized. By the design of SCF using the bilinear Z transform method the problem of aliasing can be avoided, but the frequency distortion is generated. The transformation from analog filter to digital filter is not equal in the region of the cut off frequency caused by this effect. Avoiding the problem of this effect, we use prewarping method. The result shows that the prewarped SCF makes more remarkable improvement in the frequency distortion than SCF which is transformed by using bilinear Z transform.