• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.6
• /
• pp.39-47
• /
• 1998

A fourth-order $\Sigma$-$\Delta$ modulator is designed and implemented in 0.6 $\mu\textrm{m}$ CMOS technology. The modulator is verified by introducing nonlinear factors such as DC gain and slew rate in system model that determines the transfer function in S-domain and in time-domain. Dynamic range is more than 110 dB and the peak SM is 102.6 dB at a clock rate of 2.8224 MHz for voiceband signal. The structure of a ∑-$\Delta$ modulator is a modified fourth-order ∑-$\Delta$ modulator using direct feedback loop method, which improves performance and consumes less power. The transmission zero for noise is located in the first-second integrator loop, which reduces entire size of capacitors, reduces the active area of the chip, improves the performance, and reduces power dissipation. The system is stable because the output variation with respect to unit time is small compared with that of the third integrator. It is easy to implement because the size of the capacitor in the first integrator, and the size of the third integrator is small because we use the noise reduction technique. This paper represents a new design method by modeling that conceptually decides transfer function in S-domain and in Z-domain, determines the cutoff frequency of signal, maximizes signal power in each integrator, and decides optimal transmission-zero frequency for noise. The active area of the prototype chip is 5.25$\textrm{mm}^2$, and it dissipates 10 mW of power from a 5V supply.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4_1
• /
• pp.129-136
• /
• 1992

A precedure for recovering surface displacement from a time series of pressure measured by a pressure gage in a shallow water (that is, FFTM, LCM. IWM) is investigated with respect to a proper cut-off-frequency of a frequency response function for the accurate recovery of wave height and period. The authors examined the applicability of above mentioned three transformation procedures through field observations and laboratory experiments and the following results are obtained. i) The cut-off-frequency of the frequency response function used in FFTM is deeply depend on both the frequency response of the pressure sensor and the water depth at the sensor. In this study, a relatively accurate surface displacement can be recovered when the frequency response function is cut off at the frequency corresponding to kh=3.0 where k is a wave number at the depth of h. The frequency response function in the region higher than the cut-off-frequency is set constant to be the value at the cut-off-frequency. ii) The transformed surface displacements by LCM are affected by the small waves of short periods included in the measured pressure. It is found that pressure variation whose local frequency is higher than kh=1.5 has to be neglected to recover surface displacement sufficiently. iii) In IWM, the linear pressure response function is usually utilized by multiplying a coefficient N which is a function of the frequency (or kh) and takes a value around unity. However, in this study, a constant value of N(=1.0) gives a relatively accurate recovery of surface displacements.

• Progress in Medical Physics
• /
• v.26 no.1
• /
• pp.6-11
• /
• 2015

The purpose of this study was to analyze the rotational errors of roll, pitch, and yaw in the whole breast cancer treated by the three-dimensional radiation therapy (3D-CRT) using TomoDirect (TD). Twenty-patient previously treated with TD 3D-CRT was selected. We performed a retrospective clinical analysis based on 80 images of megavoltage computed tomography (MVCT) including the systematic and random variation with patient setup errors and treatment setup margin (mm). In addition, a rotational error (degree) for each patient was analyzed using the automatic image registration. The treatment margin of X, Y, and Z directions were 4.2 mm, 6.2 mm, and 6.4 mm, respectively. The mean value of the rotational error for roll, pitch, and yaw were $0.3^{\circ}$, $0.5^{\circ}$, $0.1^{\circ}$, and all of systematic and random error was within $1.0^{\circ}$. The errors of patient positioning with the Y and Z directions have generally been mainly higher than the X direction. The percentage in treatment fractions in less than $2^{\circ}$ at roll, pitch, and yaw are 95.1%, 98.8%, and 97.5%, respectively. However, the edge of upper and lower (i.e., bottom) based on the center of therapy region (point) will quite a possibility that it is expected to twist even longer as the length of treatment region. The patient-specific characters should be considered for the accuracy and reproducibility of treatment and it is necessary to confirm periodically the rotational errors, including patient repositioning and repeating MVCT scan.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_1
• /
• pp.497-510
• /
• 2022

Agricultural reservoirs are essential structures for water supplies during dry period in the Korean peninsula, where water resources are temporally unequally distributed. For efficient water management, systematic and effective monitoring of medium-small reservoirs is required. Synthetic Aperture Radar (SAR) provides a way for continuous monitoring of those, with its capability of all-weather observation. This study aims to evaluate the applicability of SAR in monitoring medium-small reservoirs using Sentinel-1 (10 m resolution) and Capella X-SAR (1 m resolution), at Chari (CR), Galjeon (GJ), Dwitgol (DG) reservoirs located in Ulsan, Korea. Water detected results applying Z fuzzy function-based threshold (Z-thresh) and Chan-vese (CV), an object detection-based segmentation algorithm, are quantitatively evaluated using UAV-detected water boundary (UWB). Accuracy metrics from Z-thresh were 0.87, 0.89, 0.77 (at CR, GJ, DG, respectively) using Sentinel-1 and 0.78, 0.72, 0.81 using Capella, and improvements were observed when CV was applied (Sentinel-1: 0.94, 0.89, 0.84, Capella: 0.92, 0.89, 0.93). Boundaries of the waterbody detected from Capella agreed relatively well with UWB; however, false- and un-detections occurred from speckle noises, due to its high resolution. When masked with optical sensor-based supplementary images, improvements up to 13% were observed. More effective water resource management is expected to be possible with continuous monitoring of available water quantity, when more accurate and precise SAR-based water detection technique is developed.

• Korean journal of applied entomology
• /
• v.55 no.2
• /
• pp.177-188
• /
• 2016

The alpha-proteobacterium Wolbachia is one of the most important intracellular symbionts of arthropods. This Gram-negative bacterium is involved in many biological processes and is currently considered as a potential tool for biological control. Wolbachia is a cytoplasmic bacterium, maternally transferred through generations, and to facilitate its success, it has evolved several strategies that manipulate its host reproductive system to increase the number of infected individuals in the host population. The variety of Wolbachia was first recognized using genes wsp, 16S rRNA, ftsZ, gltA and groEL as molecular markers while strain genotypes of Wolbachia are determined of Multilocus sequence typing (MLST) and sequence of amino acid in region, hyper variable regions (HVRs) in protein WSP. Possible uses of the bacteria and their predominant phenotypes in control programs for agricultural pests and human disease vectors have been considered. Phenotypes are known to induce cytoplasmic incompatibility (CI), parthenogenesis induction (PI), feminization (F) and male killing (MK). Finally, applications of the bacterium in control programs of agricultural and medical insect pests have been discussed.

• Microbiology and Biotechnology Letters
• /
• v.17 no.4
• /
• pp.334-342
• /
• 1989

The Bacillus stearothermophilus cdd gene encoding cytidine deaminase (cytidine/2'-deoxycytidine aminohydrolase; EC 3.5.4.5) was isolated through shot gun cloning by oomplementation of an E. coli cdd mutation. Primarily 3.0 kbp of the exogenote was cloned into the Pstl site of pBR322 (pJSC101). By subsequent deletion and subcloning from the insert of pJSC101 with cdd$^+$ and tetracycline resistancy, about 1.35 kbp of the EcoRI$_1$/PstI$_2$ fragment containing the cdd gene was isolated as pJSC201. The minicell experiment revealed a molecular mass of 33,000 dalton for polypeptide from the cloned DNA fragment complementing the cdd gene. From the lacZ fusion of 550 bp fragment of the EcoRI$_1$/AuaI as a putative promoter region, the transcription direction of the cdd gene on pJSC201 is from EcoRI towards the PstI sites, When the cdd gene was expressed in B. subtilis ED4O (cdd$^-$, pyr$^-$) by transformation with the E. coli-B. subtilis shuttle vector, the gene expression occured more efficiently than in E. coli and the gene appears to be stably maintained in B. subtitis as well as in E. coli.

• Journal of Sensor Science and Technology
• /
• v.5 no.2
• /
• pp.29-36
• /
• 1996

With the three dimensional magnetic field measuring system dealt with in this paper, accurate measurements and analyses of extremely low frequency(ELF) magnetic fields caused by starting and/or operating electric devices and power installations can be conducted. To obtain high performance for lower frequency and spatial components without any distortion, the measuring system is designed as three dimensionally including the multiturn loop-type magnetic field sensors, differential amplifiers and active integrators. As the results of calibration experiments, the frequency response characteristics of the measuring system range from 8[Hz] to about 53[kHz] for each direction of x, y, z axes, and the response sensitivities are 9.54, 9.21, $10.89[mV/{\mu}T]$, respectively. The actual survey experiments by using an oscillating impulse current generator confirm a reliability of the proposed measuring system. Also, through the other experiments by using small-sized induction motors, the magnetic field intensities when starting and steady-state operating mark 15.8, $8.61[{\mu}T]$ as maximum value, respectively. And those intensities decrease steeply according as the measuring distance increases.

• Journal of Life Science
• /
• v.9 no.2
• /
• pp.169-175
• /
• 1999

Salmonella typhimurium can encounter a wide variety of environments during its life cycle. In nature, S. typhimurium can experience and survive dramatic acid stresses that occur in diverse ecological niches ranging from pond water to phagolysosomes. These survival mechanism is aquired by the Acid Tolerance Response(ATR) in Salmonella. The ATR of S. typhimurium is a complex inducible phenomenon in which exposures to slight or moderate low pH will produce a stress response capable of protecting the organism against more severe acid challenges. ATR in Salmonella has two different systems that are called RpoS dependent and independent. We found that ATR in anaerobic was showed RpoS independent because rpoS$\Omega$AP had ATR as S. typhimurium UK1. Using the P22 MudJ(Km, lacZ) operon fusion technique and a lethal selection procedure combining low pH(pH4.5) and sodium acetate(10mM, pH4.5), we isolated LF487 aatA::MudJ which showed acid sensitive in anaerobic condition. aatA locus was determined at 12 min on Salmonella Genetic Map. The survival rate of aatA mutant was showed significantly diminished at pH4.3 than virulent wild type Salmonella in anaerobic condition(5% $CO_2$, 5% H$_2$, 90% $N_2$). Therefore isolated gene was confirmed important gene for anaerobic ATR system.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.210-216
• /
• 2015

Purpose of this study was a development of an image processing algorithm to recognize paprika and acquire it's 3D coordinates from stereo images to precisely control an end-effector of a paprika auto harvester. First, H and S threshold was set using HSI histogram analyze for extracting ROI(region of interest) from raw paprika cultivation images. Next, fundamental matrix of a stereo camera system was calculated to process matching between extracted ROI of corresponding images. Epipolar lines were acquired using F matrix, and $11{\times}11$ mask was used to compare pixels on the line. Distance between extracted corresponding points were calibrated using 3D coordinates of a calibration board. Non linear regression analyze was used to prove relation between each pixel disparity of corresponding points and depth(Z). Finally, the program could calculate horizontal(X), vertical(Y) directional coordinates using stereo camera's geometry. Horizontal directional coordinate's average error was 5.3mm, vertical was 18.8mm, depth was 5.4mm. Most of the error was occurred at 400~450mm of depth and distorted regions of image.

• Journal of the Korean Magnetics Society
• /
• v.14 no.1
• /
• pp.18-24
• /
• 2004

Ni-Zn ferrite powder was synthesized from metal nitrates, Fe(N $O_3$)$_3$$.$9 $H_2$O, Ni(N $O_3$)$_2$$.$6 $H_2$O, Zn(N $O_3$)$_2$$.$6 $H_2$O by wet direct process to make high permeability material. The composition of the ferrite powder is (N $i_{0.284}$F $e_{0.053}$Z $n_{0.663}$)F $e_2$ $O_4$. Ni-Zn ferrite powder is compounded by precipitating metal nitrates with NaOH in vessel at 90$^{\circ}C$ synthetic temperature for 8 hours. Calcination temperature and sintering temperature were 700$^{\circ}C$ and 1150$^{\circ}C$-1250$^{\circ}C$ respectively for 2 hours. The same compound powder was extracted from metal oxide by wet ballmilling. We compared the properties of powder and the electromagnetic characteristics of the sintered cores obtained from the two different processes. Wet direct process produces smaller particle size with narrower distribution and higher purified ferrite which cores has high permeability and high magnetization.