• Journal of the Korean Society of Tobacco Science
• /
• v.17 no.1
• /
• pp.27-32
• /
• 1995

A new flue-cured tobacco mutant line BU 8832-85 was developed at Taegu Experiment Station, Korea Ginseng and Tobacco Research Institute in 1994. KF 8832-85 was resulted from a cross of flue-cured cultivars NC 95$\times$NC 2326, and developed by a pedigree system of breeding ; initial selection was made by plant type and resistance to bacterial wilt(BW) disease(heudomonas solanaceamm) in the F2 generation under the natural field conditions infested with the pathogen. One white flowered plant was occurred by spontaneous mutation in a certain line among the F3 generatioin while the others were pink. Six plants from the seeds by selfing were selected at the field infested with the pathogen among 240 populations with white flowering in the F4, KF 8832-85 was selected based on yield and leaf quality trials among 6 lines in Fs generation. BCF 8832-85 was compared with its Parent for certain agronomic and chemical characteristics at Taegu Experiment Station in 1993 and 1994. The results showed that KF 8832-85 have white flower, the stalk height was approximately that of NC 2326 but averaged about loom taller than NC 95. It produced ground suckers as much as NC 95, and did not breakdown leaf at the same as WC 2326. KF 8832-85 have high resistance to bacterial wilt disease. Yield of KF 8832-85 was 10 and 18% higher then that of NC 2326 and WC 95, respectively. Price per Kg was equal to that of NC 2326. The contents of nicotine and reducing sugar did not differ significantly from NC 95, while total nitrogen was significantly lower than NC 95. Therefore, the new mutant line is genetically stable for agronomic and chemical characteristics and provides a source of bacterial wilt disease resistance for use in breeding resistant flue-cured cultivars. Key words : Mutant line, White flower, Spontaneous mutation.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.1
• /
• pp.107-112
• /
• 2004

The combining abilities in the 5 newly evolved thermo tolerant breeds viz., SR6, SR7, SR8 SR9 and SR10 of silkworm Bombyx mori L. and their 15 hybrids were made in a line${\times}$tester crossing programme. Data were analysed for seven quantitative traits i.e., pupation rate, cocoon yield, cocoon weight, cocoon shell weight, cocoon shell ratio, filament length and raw silk percentage under optimum room temperature $(25{\pm}{1^{\circ}C})$ conditions (In case of high temperature $(36{\pm}{1^{\circ}C})$ stress conditions five economic traits except filament length and raw silk percentage) with 3 widely adapted testers i.e., KA, CSR2 and CC1 as lines (females) and testers (males) respectively. The performance at high temperature and low humidity conditions aye only taken into consideration for selecting the best lines/hybrids. Among the lines SR6 exhibited positive General combining ability (GCA) effects for pupation rate, cocoon yield, cocoon weight and cocoon shell ratio traits, followed by SR7 for pupation rate, cocoon yield and cocoon shell weight and cocoon shell ratio. Among testers, KA exhibited positive GCA effects for two quantitative traits cocoon yield, cocoon weight and CSR2 for cocoon shell weight and cocoon shell ratio under adverse temperature conditions. The hybrid SR6${\times}$CC1 and SR7${\times}$CSR2 exhibited significant positive Specific combining ability (SCA) effects for majority of the traits in high temperature stress conditions of rearing. The better parent value of heterosis(Heterobeltiosis) was exhibited by the hybrid SR6${\times}$CC1 for pupation rate, cocoon yield, cocoon weight and cocoon shell weight and SR7${\times}$CSR2 for all the trails evaluated under high temperature conditions. Based on the results, the lines SR6 and SR7 was judged as best combiners and the hybrids SR6${\times}$CC1 and SR7${\times}$CSR2 can be selected for commercial exploitation in tropical climate.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.2
• /
• pp.205-209
• /
• 1997

In a line X tester crossing programme (24 lines 2 testers) the general combining ability (GCA) and specific combining ability (SCA) effects were analyzed for five economic characters in the bivoltine silkworm, Bombyx mori L. The results showed desired GCA effects in 934D1 (9500), 934B (9789) and 934A1 (9855) for cocoon yield per 10,000 larvae brushed by number. Likewise, the lines found to be superior based on GCA effects for other characters were as follows; 931D (14.040 Kgs), 935E (17.023 Kga.), 934D1 (15.643 Kgs.) and 934B (15.687 Kgs.) for cocoon yield by weight: 931D (1.717 g) and 930E (1.796 g) for single cocoon weight; 932B (0.330 g) for single shell weight: 931D (1.717 g) and 930e (1.796 g) for single cocoon weight; 932B (0.330 g) for single shell weight; 932B (18.7%), 933A (18.86%) and 935A (19.89%) for shell ratio. SCA effects showed the superiority of 932D$\times$KA (9822 cocoon yield per 10,000 larvae brushed by number); 932A$\times$NB4D2 (16.933 Kgs. cocoon yield per 10,000 larvae brushed by weight); 931C$\times$KA (1.911 g single cocoon weight); 934$\times$NB4D2 (0.371 g single shell weight and 21.0% shell ratio). The analysis indicated non-additive gene action for all the five characters.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.1
• /
• pp.34-44
• /
• 1996

Several major agronomic traits of 4 isogenic lines for tillering(Kindred, Morex)were investigated under the different seeding rates and seedling mortality grown in the pots. The normal-tillering phenotypes had higher grain yield(46％) and leaf area index(56％) than their uniculm isogenic counterparts. The assortment rate(69％) and 1,000 grain weight(27％) in uniculm type were greater than the normal type. Uniculm plants were earlier in heading(4∼8days) and maturing(2∼3 days) dates compared with their counterparts. The grain yield was fitted to linear regression, ranged 0.659g to 0.5g per spike number. On increasing the seedling mortality rates, the grains per spike and 1,000 grain weight were slightly decreased, but the grain yield per plot was decreased markedly because of decrease of spikes per plot. The assortment rate, leaf photosynthetic capacity and reproductive tiller number were increased with increase of seedling mortality. The grain yield was largely dependent on the number of spikes per plot on occurrence of seedling mortality. For the uniculm genotypes to be introduced and bred into a present leading variety, the isogenic lines were precisely tested in the open field for a couple of years.

• Steel and Composite Structures
• /
• v.13 no.5
• /
• pp.409-421
• /
• 2012

Recently, as the height of building is getting higher, the applications of CFST column for high-rise buildings have been increased. In structural system of high-rise building, The RC core and exterior concrete-filled tubular (CFST) column-beam pinned connection is one of the structural systems that support lateral load. If this structural system is used, due to the minimal CFST column thickness compared to that of the CFST column width, the local moment occurred by the eccentric distance between the column flange surface from shear bolts joints degrades the shear strength of the CFST column-beam pinned connections. This study performed a finite element analysis to investigate the shear strength under eccentric moment of the CFST column-beam pinned connections. The column's width and thickness were used as variables for the analysis. To guarantee the reliability of the finite element analysis, an actual-size specimens were fabricated and tested. The yield line theory was used to formulate an shear strength formula for the CFT column-beam pinned connection. the shear strength formula was suggested through comparison on the results of FEM analysis, test and yield lime theory, the shear strength formula was suggested.

• Steel and Composite Structures
• /
• v.1 no.3
• /
• pp.295-312
• /
• 2001

The purpose of this paper is to propose a new type of steel reinforced concrete (SRC) beam-column joints and to examine the structural performance of the proposed joints, which simplify the construction procedure of steel fabrication, welding works, concrete casting and joint strengthening. In the proposed beam-column joints, the steel element of columns forms continuously built-in crossing of H-sections (${\Box}$), with adjacent flanges of column being connected by horizontal stiffeners in a joint at the level of the beam flanges. In addition, simplified lateral reinforcement (${\Box}$) is adopted in a joint to confine the longitudinal reinforcing bars in columns. Experimental and analytical studies have been carried out to estimate the structural performance of the proposed joints. Twelve cruciform specimens and seven SRC beam-column subassemblage specimens were prepared and tested. The following can be concluded from this study: (1) SRC subassemblages with the proposed beam-column joints show adequate seismic performances which are superior to the demand of the current code; (2) The yield and ultimate strength capacities of the beam-to-column connections can be estimated by analysis based on the yield line theory; (3) The skeleton curves and the ultimate shear capacities of the beam-column joint panel are predicted with a fair degree of accuracy by considering a simple stress transfer mechanism.

• Microbiology and Biotechnology Letters
• /
• v.28 no.5
• /
• pp.298-302
• /
• 2000

Fermentation parameters were estimated by use of a vent gas analyzer coupled to a computer data acquisition system in cultivation of Phellinus linteus WI-001, pro-ducer of polysaccharides known to have potent anticancer activities. Oxygen uptake rate(OUR), a critical indicator of the cells activities, was calculated by applying oxygen mass balance. In addition, by dividing the oxygen uptake rate hy the total oxygen consumed, on-line estimation of the cells specific growth rate was successfully done. It was also possible to estimate cell concentration directly bt use of oxygen-cell yield($Y_{x/o}$ ) which was obtained based on a correlation between cell growth and total oxygen consumed.

• Asian Journal of Turfgrass Science
• /
• v.11 no.4
• /
• pp.321-326
• /
• 1997

A high seed yield '232' was evaluated for morphological characteristics and tissue culture re-sponse. The effect of mowing and urea application on coverage in '232' was also studied and the results were as follows ;1.'232' produced high seed yield than any other lines, but its other characteristics such as coverage, establishment rate, stolon length, stolon number and colour change were not good. 2.Callus induction of '232'(52.9%) was relatively high, and higher than that of Z. sinica(49.0%). However, embryogenic callus formation of '232' was not as good as that of Z. japonica and Z. sinica. 3.Coverage of '232' was very much enhanced by mowing on July 18, but not at all by mowing on May 29 and September 4. 4.Urea application did not increase the coverage in '232',Therefore, it can be used as a breeding material rather than direct use.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2338-2343
• /
• 2007

The practical studies on the method of particle contamination control for yield enhancement in the cleanroom were carried out. The method of the contamination control was proposed, which are composed of data collection, data analysis, improvement action, verification, and implement control. The partition check method for data collection and data analysis was used in the cellular phone module production lines. And this method was evaluated by the variation of yield loss between before and after improvement action. In case that the partition check method was applied, the critical process step was selected and yield loss reduction through improvement actions was observed. From these results, it is concluded that the partition check method is effective solution for particle contamination control in the cleanroom production lines.

• Structural Engineering and Mechanics
• /
• v.29 no.6
• /
• pp.623-642
• /
• 2008

While spatial plastic mechanism analysis has been widely and successfully applied to thinwalled steel structures to analyse the post-failure behaviour of sections and connections, there remains some contention in the literature as to the basic capacity of an inclined yield line. The simple inclined hinge commonly forms as part of the more complex spatial mechanism, which may involve a number of hinges perpendicular or inclined to the direction of thrust. In this paper some of the existing theories are compared with single inclined yield lines that form in flange outstands, by comparing the theories with plate tests of plates simply supported on three sides with the remaining (longitudinal) edge free. The existing mechanism theories do not account for different in-plane displacement gradients of the loaded edge, nor the slenderness of the plates, and produce conservative results. A modified theory is presented whereby uniform and non-uniform in-plane displacements of the loaded edge of the flange, and the slenderness of the flange, are accounted for. The modified theory is shown to compare well with the plate test data, and its application to flanges that are components of sections in compression and/or bending is presented.