• 한국연초학회지
• /
• 제3권2호
• /
• pp.115-122
• /
• 1981

Data for this study were obtained from Burley 21 (Nicotiana tabacum L.) grown under various densities on the field in 1978 and 1979 at the Jeonju Experiment Station, Korea Ginseng & Tobacco Research Institute. Interrelations between yield and its components were statistically studied by correlation, regression, and pathway analysis. Correlation of yield with plant population was significant and positive. Quadratic functions for yield vs. plant population and the length of the largest leaf were fitted to the data. Multiple recession equation between yield and its components (leaf number ($X_1$), a leaf area ($X_5$), weight per unit leaf area ($X_9$), plant population ($X_14$)), was significant at the 5% level. Measuring the relative importance of its components on yield, plant population was 49.5%, weight per unit leaf area 25.3%, a leaf 15.6%, and leaf number 9.8%.

• 한국작물학회지
• /
• 제51권2호
• /
• pp.163-168
• /
• 2006

Improvement of crop yield can be achieved through understanding genetic variation in reproductive characters and its impact on yield components. The present study was performed to evaluate genetic diversity for reproductive growth characters in exotic germplasm resources and to determine the relationships between developmental and growth periods with yield and yield components in soybean cultivar groups. For phenotypic evaluation such as reproductive and agronomic traits, a total of 80 indigenous and exotic soybean cultivars collected from four different geographical regions (China, Japan, Korea, and Vietnam) were grown from May to November of 2003 at the Seoul National University Farm, Suwon, Korea ($127^{\circ}02'E$ longitude, $37^{\circ}26'N$ latitude). Most of all the characters exhibited wide range of phenotypic variation, of which pod number, seed number, and plant yield showed greater range as compared to other characters. Korean cultivar groups showed greater diversity than the other cultivar groups in seven characters. Correlation analysis showed that days to flowering (DTF) and days to maturity (DTM) had close association with agronomic traits as well as yield and yield components. Both DTF and DTM had positive correlation with the other characters except one hundred seed weight. Stepwise multiple linear regression revealed that seed and pod number were identified as being significant for plant yield. The results in this study indicated wide variation in agronomic traits including DTF and DTM, suggesting the valuable genetic resources in a soybean breeding program.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.354-354
• /
• 2017

Rice grain yield is determined by crop dry matter production that is sensitive to temperature. Our objective was to determine whether the difference in temperature between years had an impact on the relationship between yield components and grain yield. Field experiments were conducted under machine transplanting cultivation by using yield data of two japonica rice varieties, Odaebyeo (early maturing) and Nampyeong (mid-late maturing), in 2013 to 2016 in Suwon, Korea. Plant height, dry weight, and yield components were examined by analysis of variance, correlation. The milled rice yield of the two varieties were the highest in 2016, however the lowest yields were observed in the different years. In 2016, Odaebyeo produced $0.96t\;ha^{-1}$ greater milled rice yield than in 2015, and Nampyeong produced $1.11t\;ha^{-1}$ greater yield than in 2013. The correlation analysis indicated that spikelet per panicle (R = 0.53) was associated with grain yield of Odaebyeo. In Nampyeong, biomass at heading date (R = 0.74), 1000-grain weight (R = 0.71), spikelet per panicle (R = 0.58), and panicle number per $m^2$ were associated with grain yield. Sink size (spikelet number per $m^2$) of the two varieties responded to accumulative temperature from transplanting to panicle initiation stage. In this experiment, optimal accumulative temperature before panicle initiation has effect on increased spikelet number and/or number of panicle that were mainly responsible for yield difference. Rice production research to increase grain yield should consider all yield components, but increased emphasis on biomass production before heading is also necessary as well as grain ripening conditions.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.234-234
• /
• 2017

Recent abnormal weather, especially continued rainfall during sowing season causes difficulty in proper sowing of wheat and delayed sowing after November 15 is concerned about freezing damage during winter, resulting in reduction of wheat yield. To correspond government policy of crop sufficiency improvement and produce and supply raw wheat and barley steadily, expansion of cultivation area is necessary and spring sowing of wheat is required. To obtain basic information on the improvement of spring sown wheat and barley production, comparison and path coefficients analysis was conducted for yield and yield related components from autumn and spring sown wheat and barley. Path analyses were known as very useful in clarifying the effects of yield components on grain yield formation, which were not accurately reflected in simple correlation anaylses. Most cultivated 5 wheat and 9 barley cultivars were sown on October and February at Cheon-ju province according to standard sowing method. For the spring sowing of wheat and barley, the varieties having vernalization degree I~III are seeded in the mid of February and seeding rate is 200~250kg/ha which is increased by 25% than autumn sowing. N-fertilizer of 95 kg/ha and the same amount of P, K dressed in autumn are applied at once as basal fertilizer. The magnitude of direct effect in each yield components on yield was in sequence as follows. In autumn wheat, grain number per $spike{\geq}$ the number of spike per $m^2$>1000-grain weight and in spring wheat, grain number per $ spike{\geq}the$ number of spike per $m^2$> 1000-grain weight. In autumn naked barley, 1000-grain weight> the number of spike per $m^2$, grain number per spike and in spring barely, the number of spike per $m^2$> grain number per spike > 1000-grain weight. In autumn covered barley, grain number per spike>the number of spike per $m^2$ and in spring coverd barley, the number of spike per $m^2$> grain number per spike, 1000-grain weight. In autumn malt barley, the number of spike per $m^2$>1000-grain weight and in spring malt barley, the direct effects of three yield components were similar. According to the path analysis of yield components for spring sown wheat and barley, it was suggested that adequate number of spike per $m^2$ was most important factor for yield increase.

• Plant Resources
• /
• 제6권3호
• /
• pp.159-164
• /
• 2003

This study was conducted to investigate the relationship between yearly variations of climatic elements and yearly variations of productivity in malting barley. In addition, correlation coefficients among yield and yield components were estimated. The data of yield and yield components were investigated for 10 years from 1991 to 2000. The meteorological data gathered at the Yeosu Weather Station for the same period were used to find out the relationships between climatic elements and productivity. Yearly varation of the amount of precipitation in December and January were large with coefficients of variation(c. v.) of 97.9, 51.3%, respectively, but the variation of the maximum temperature and minimum temperature in April were relative small. Yield, weight of 1,000 grains and culm length were greatly with c. v. of 37.3, 49.3 and 41.3%, respectively. spike length and number of spikes show more or less c. v. of 3.8, 24.7% respectively and number of grains per spike show still less variation with c. v. of 9.4%. Correlation coefficients between temperature of mean, maximum and minimum in February and seed yield and yield components were positively significant at level of 5.1%, respectively. Correlation coefficients between precipitation of April and seed yield were positively significant correlation at the level of 5.1 %, respectively, but the duration of sunshine in April and seed yield were negatively significant at the level of 5.1%, respectively. Correlation coefficients of those, yield components and yield, culm length, spike length, number of grains per spike, number of spikes per $m^2$, weight of 1,000 grains and seed yield were positively significant at the level of 5.1 % respectively.

• Structural Engineering and Mechanics
• /
• 제58권4호
• /
• pp.677-687
• /
• 2016

On the basis of the energy approach it is reported a development of the yield function and the constitutive equations for the orthotropic material with consideration of the crystal lattice constants and parameters of the crystallographic texture for the general stress state. For practical use in sheet metal forming analysis it is considered different loading scenarios: plane stress and plane strain states. Using the proposed yield function, the influence of single ideal components on the shape of yield surface was analyzed. The six texture components investigated here were cube, Goss, copper, brass, S and rotated cube, as these components are typically observed in rolled sheets from FCC alloys.

• 한국유기농업학회지
• /
• 제27권2호
• /
• pp.225-235
• /
• 2019

The present study hypothesized that ratio between carcass traits components could be applied for the understanding of yield index in Hanwoo steer. A thousand data was generated based on average carcass weight (CW), loin area (LA) and backfat thickness (BT) of Hanwoo steer in December 2018 for analysis 1. Then yield index (YI) was calculated using newly established yield index equation. The correlation between yield index and each carcass traits was visualized. In the interaction between carcass traits components (LA, CW, BT) and YI, only the interactions including BT showed a regular pattern to YI. Then changes of YI according to ratio of carcass traits components were investigated. The observed interactions between LABT and CWBT were similar with Monod equation model. The changes of YI to LABT and CWBT were fitted to Monod equation, and yield constants (K1 for LABT; K2, CWBT) of each equation were calculated as 0.47 and 2.20, respectively. Carcass traits from 5 commercial Hanwoo steer farm were then employed in the second analysis. Yield constants of each farm were estimated. In estimation, R² value for K1 (LABT) showed greater than the K2 (CWBT). Finally, each farm was plotted based on their K1 and K2 values and it was found that greater yield index of Hanwoo steer was found as increased K1 and K2. As conclusion, the present study suggested the possibility of K1 and K2 values for understanding of yield grade equation and their application in the evaluation of new model for yield grade estimation and feeding strategy.

• 한국작물학회지
• /
• 제47권4호
• /
• pp.311-318
• /
• 2002

Planting date of soybeans [Glycine max (L.) Merr.] is one of production components in cultural systems. The objective of the current study was to identify the components of soybean production and cultural practices encompassing planting dates and cultivars that respond to dry matter accumulation, harvest index and yield components. Three determinate soybean cultivars were planted on May 13 (early), June 3 (mid), and June 24 (late). Planting density was 60$\times$15cm with 2 seeds (222,000 plants per ha). Soybean plants were sampled every 10 days interval from the growth stages of V5 to R8 and separated into leaves including petioles, stems, pods, and seeds. Dry matter accumulations, harvest indices, and yield components were measured. Early planting had taken 55 days from VE to R2 and late planting taken 39 days indicating reduced vegetative growth. Early planting showed higher leaf, stem, pod and seed dry weights than late planting. However, late planting appeared to be higher harvest index and harvesting rate. Vegetative mass including leaf and stem increased to a maximum around R4/R5 and total dry weight increased to a maximum around R5/R6 and then declined slightly at R8. The highest seed yield was obtained with mid planting and no difference was found between early and late plantings. Cultivar differences were found among planting dates on growth characteristics and yield components. The results of this experiment indicated that soybean yield in relation to planting dates examined was mainly associated with harvest index and harvesting rate, and planting date of cultivars would be considered soybean plants to reach the growth stage of R4/R5 after mid August for adequate seed yield.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.238-238
• /
• 2017

Salt stress is one of the deteriorating abiotic stresses due to the climate change, which causes over-accumulation of $Na^+$ and $Cl^-$ ions in plants and inhibits the growth and yield of rice especially in coastal Southeastern Asia. The yield components of rice plant (panicle number, spikelet number per panicle, 1000-grain weight, % of ripened grains) that are majorly affected by salt stress vary with growth stages at which the plant is subjected to the stress. In addition, the salt sensitivity of each yield component differs among rice varieties even when the salt-affected growth stage was same, which indicates that the physiological mechanism to maintain each yield component is different from each other. Therefore, we hypothesized that rice plant has different genes/QTLs that contribute to the maintenance of each yield component. Using a Japanese leading rice cultivar, Koshihikari, and salt-tolerant Nona bokra's chromosome segment substitution lines (CSSLs) with the genetic background of Koshihikari (44 lines in total) (Takai et al. 2007), we screened higher yielding CSSLs under salinity in comparison to Koshihikari and identified the yield components that were improved by the introgression of chromosome segment(s) of Nona bokra. The experiment was conducted in a salinized paddy field. One-month-old seedlings were transplanted into a paddy field without salinity. These were allowed to establish for one month, and then the field was salinized by introducing saline water to maintain the surface water at 0.4% salinity until harvest. The experiments were done twice in 2015 and 2016. Although all the CSSLs and Koshihikari decreased their yield under salinity, some CSSLs showed relatively higher yield compared with Koshihikari. In Koshihikari, all the yield components except panicle number were decreased by salinity and % of ripened grains was mostly reduced, followed by spikelet number per panicle and 1000-grain weight. When compared with Koshihikari, keeping a higher % of ripened grains under salinity attributed to the significantly greater yield in one CSSL. This indicated that the % of ripened grains is the most sensitive to salt stress among the yield components of Koshihikari and that the Nona bokra chromosome segments that maintained it contributed to increased yield under salt stress. In addition, growth analyses showed that maintaining relative growth rate in the late grain filling stage led to the increased yield under salt stress but not in earlier stages.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제4권2호
• /
• pp.143-147
• /
• 2002

Studies on the interrelationship between biological yield and harvest index, and their association with shoot rearing were carried out in 9 promising mulberry genotypes, which indicated significant variations among genotypes. Biological yield had close association with leaf yield components indicating that they are inter-related for higher productivity in mulberry, Biological yield revealed highly significant positive correlation with important leaf yield components. However height of the longest branch showed negative correlation with biological yield. Genotypes with higher biological yield associated with low ratio of stem weight to leaf weight and high Harvest index on dry weight basis are to be selected for shoot rearing. Biological yield recorded on fresh weight basis had less impact on the present study in comparison to dry weight basis.