• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.16-20
• /
• 2013

Yellow poplar grown in Korea and imported eucalyptus were compared their kraft pulping characteristics and evaluated the replacing possibility of eucalyptus by yellow poplar. Difference between yellow poplar and eucalyptus were investigated in chemical composition and fiber morphology. Yellow poplar kraft pulp resulted in the higher yield, longer fiber length and thicker fiber, and higher pulp strength than that of eucalyptus. More xylan survived in eucalyptus than yellow poplar during kraft pulping, which led to similar pulp yield even though polysaccharides in Eucalyptus was 4.5% less than in yellow poplar. Longer and thicker yellow poplar pulp fiber resulted in better beating response and pulp strength properties.

• Journal of the Korea Furniture Society
• /
• v.24 no.4
• /
• pp.345-349
• /
• 2013

Yellow poplar is well known commercial hardwood species in the world because of its availability, rapid growth, large size, excellent form, early natural pruning, and the good working quality of the wood. Therefore, yellow poplar (Liriodendron tulipifera L.) has been adopted in South Korea for decades ago, and its cultivating the saplings and silvicultural system have been studied. However, yellow poplar is still embroiled in controversy for utilization of use and worth. This species has not only advantages such as lower weight, light color, and higher machinability and bending processing, but also has disadvantages which are bad smell and different colors on heartwood and sapwood. In this study, the objective was that use of yellow poplar board as furniture materials by drying and painting process. Thirty years old yellow poplar was cut and dried for 7 days by high-frequency dryness. Adjustment of color tone to walnut color was conducted with multiple colorants and various number of spread times. Uniform color of yellow poplar on heartwood and sapwood was accomplished by applying 1 time stain (green), 2 times transparent primer, 1 time middle-painting (walnut), and 2 times top-painting (walnut) in sequentially. The painted yellow poplar board was used to manufacture table and dressing table. During the furniture manufacture process, no critical issues were occurred on part of jointing and painting. This painting method may be useful data for future use of yellow poplar as furniture materials.

• Journal of Korean Society of Forest Science
• /
• v.99 no.5
• /
• pp.744-749
• /
• 2010

Enzymatic hydrolysate from non pre-treated biomass of yellow poplar (Liriodendron tulipifera) was prepared and used as resource for bioethanol production. Fresh branch (1 year old) of yellow poplar biomass was found to be a good resource for achieving high saccharification yields and bioethanol production. Chemical composition of yellow poplar varied significantly depending upon age of tree. Cellulose content in fresh branch and log (12 years old) of yellow poplar was 44.7 and 46.7% respectively. Enzymatic hydrolysis of raw biomass was carried out with commercial enzymes. Fresh branch of yellow poplar hydrolyzed more easily than log of yellow poplar tree. After 72 h of enzyme treatment the glucose concentration from Fresh branch of yellow poplar was 1.46 g/L and for the same treatment period log of yellow poplar produced 1.23 g/L of glucose. Saccharomyces cerevisiae KCTC 7296 fermented the enzyme hydrolysate to ethanol, however ethanol production was similar (~1.4 g/L) from both fresh branch and log yellow poplar hydrolysates after 96 h.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.470-479
• /
• 2010

In this study, the visual grading based on the visual characteristics and structural timber bending test were conducted for domestic yellow poplar dimension lumber. Structural performance of domestic yellow poplar dimension lumber was conducted through the evaluation of strength and stiffness. Visual grading rule of yellow poplar dimension lumber did not exist in Korea. Visual grading of yellow poplar dimension lumber was performed according to the NSLB (Northern Softwood Lumber Bureau) standard grading rules including several hardwood dimension lumber. The allowable bending stress was calculated from the results of a visual grading. Compared with NDS (National Design Specification), the yellow poplar dimension lumber showed enough strength for structural uses. In addition, the visual grading was performed according to the KFRI (Korea Forest Research Institute) grading rule to calculated allowable bending stress and to evaluated the feasibility. The yellow poplar was classified into the pine groups by the KFRI criteria regulated by specific gravity. Allowable bending stress based on weibull distribution had became highly than KFRI criteria, as No. 1 (10.0 MPa), No. 2 (7.4 MPa) and No. 3 (4.1 MPa). And the availability of yellow poplar dimension lumber for structural uses had been confirmed. The Modulus of Elasticity (MOE) of domestic yellow poplar dimension lumber had not met the NDS and KFRI criteria. However, for the use of domestic yellow poplar, average values of MOE which obtained through this test were suggested as design value for domestic yellow poplar. Design values were supposed No. 1, 2 (9,000 MPa) and No. 3 (8,000 MPa).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.3
• /
• pp.22-27
• /
• 2010

Pulping properties of the imported mixed eucalyptus chips and the domestic yellow poplar chips were investigated for comparing two chips as the raw materials for the hardwood chemical pulp. Soda-AQ (anthraquinone) pulping was applied for this study. The pulp from yellow poplar showed higher pulp yield than pulp from mixed eucalyptus, which comes from the lower hot-water soluble extractives and the higher polysaccharides in yellow poplar chips than those of the mixed eucalyptus chips. The yellow poplar pulp had higher average fiber length and fiber width than those of the mixed eucalyptus pulp, which led to the better respond to beating and the higher tear strength than those of the pulp from the mixed eucalyptus chips.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.357-366
• /
• 2014

Based on fundamental properties and machining characteristics of Yellow poplar (Liriodendron tulipifera L.), it has well performance on machinability or workability, drying, and fine surface. Additionally, yellow poplar is light weight and has bright color with high performance of bending processing, so it could be used for furniture or artworks materials and wood-based panel materials. Recently, public attention has been focused on indoor air quality, and Ministry of environment drift more tight regulation on indoor air quality for an apartment house and public facility with the times. Construction materials has been assessed emission of volatile organic compounds (VOCs) and formaldehyde according to law (No.10789), so yellow poplar is also needed to assess these emission characteristics. Emission of VOC and aldehyde compounds from dry and green wood condition of yellow poplar were investigated with KS M 1998:2009. Based on results, more than 30 compounds were detected from yellow poplar, and lower NVOC (natural VOC) were emitted than AVOC (Anthropogenic VOC) and OVOC (other VOC). Formaldehyde emission was lower than $5{\mu}g/m^3$ and acetaldehyde, ketone, and propionaldehyde were detected from yellow poplar. From dry yellow poplar, m-Tolualdehyde ($33.6{\mu}g/m^3$) was additionally detected while no detection of propionaldehyde. After drying process, amount of ketone emission increased significantly. The unique smell of yellow poplar may not only come from emission of acetaldehyde and propionaldehyde.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.198-201
• /
• 2008

The electron beam irradiation was applied as a pretreatment of the enzymatic hydrolysis of yellow poplar with doses of 0$\sim$450 kGy. The higher irradiation dose resulted in the more degradation of hardwood biomass not only from carbohydrates but also from lignin. This changes originated from the irradiation resulted in the better response to enzymatic hydrolysis with commercial cellulases (Celluclast 1.5L and Novozym 342). The more improvement on enzymatic hydrolysis by the irradiation was found in the xylan than in the cellulose of yellow poplar.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.5
• /
• pp.578-590
• /
• 2015

The present study examines the influence of slurry composting and biofiltration liquid fertilizer (SCBLF) treatment on the biomass characteristics of yellow poplar, and the optimization of organosolv pretreatment for sugar production. After SCBLF treatment, total exchangeable cation contents of yellow poplar was increased from $3.1g\;kg^{-1}$ to $4.4g\;kg^{-1}$, and as a result, biomass production of yellow poplar was also enhanced by 82.3%. Organosolv pretreatment was conducted with three independent variables: 1) reaction temperature: $133.2^{\circ}C$ to $166.8^{\circ}C$; 2) acid concentration: 0.2% to 1.8%; and 3) reaction time: 1.6 min to 18.4 min. Reaction temperature was the most significant variable in water insoluble solid (WIS) recovery rate. High overall sugar yield was attained from pretreatment conditions approximately 50% of WIS recovery rate, and the highest overall glucose yield (44.0%) was achieved from pretreatment at $140^{\circ}C$ with 1.5% acid concentration for 5 min. Consequently, 21.1% of glucose and 5.8% of xylose were produced from the organosolv pretreatment of SCBLF-treated 8-year-old yellow poplar.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.333-343
• /
• 2011

The yellow poplar is an appropriate species for the age of low carbon green growth, because its absorption rates of ozone is greatly excellent, and also the absorption rates of carbon dioxide causing climate changes is very remarkable. The yellow poplar, which is a kind of rapid growth tree, shows a lack of performance as a structural member, however, it is suitable to use a variety of purposes like furniture materials, interior materials, plywood materials, and so on. In this study, the structural size skin-timbers were made by using the yellow poplar, and the compressive capacity was evaluated, also the numerical model was developed for the various uses. The rectangular shape skin-timber presented a good performance by showing 56.3% residual strength about the solid material. In case of the cylinder shape skin-timber showed a possibility to use diversely as a furniture material, as well as a structural uses, because almost 50% compressive capacity of material even though its residual area rates was 25%. Both rectangular shape and the cylinder shape represented that 'Brooming or end rolling' were the major failure mode, and partly splitting failure mode. The compressive capacity of the rectangular shape which residual area rates was large was higher than the cylinder shape, but it did not show statistical significance about the compressive capacity between them. Thus, it will be possible to use them mixed for a convenience of users. The result of the numerical analysis model was quite similar to actual test of the compressive capacity. Therefore, the yellow poplar can be utilized in the development of various uses by applying numerical analysis model about a variety of shapes and dimensions.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.1
• /
• pp.17-26
• /
• 2010

Recently, yellow poplar (Liriodendron tulipifera L.) is getting attention in Korea due to the fast growing and high yield and quality of lumber. But, it is thought that the color difference between heartwood and sapwood may restrict the practical use of it. This study was aimed to enhance the value of yellow poplar lumber by the color control using high temperature heat-treatment, which had been tried for domestic cedar (Kim et al., 2009). The material properties including surface color of yellow poplar lumber were evaluated according to heat treatment conditions. The difference of color between sapwood and heartwood could be reduced by heat treatment at a temperature about $200^{\circ}C$. Long heating time was more effective in reducing the difference. The Equilibrium Moisture Content (EMC) of heat-treated wood was as low as 50 percent of the control. The result obviously indicates that heat-treated wood is more dimensionally stable in the change of moisture condition. The durability against wood rotting fungi also increased by the heat-treated, but it was not so effective as the case of cedar. The changes of mechanical properties of heat-treated yellow poplar were very similar to that of heat-treated cedar. In order to develop new use of heat-treated yellow poplar, the changes of mechanical properties should be considered. There were no significant changes in microscopic structure which may cause changes in mechanical properties. Further study of heat-treated wood is needed to scrutinize the causes of changes of material properties.