• 한국연소학회지
• /
• 제18권2호
• /
• pp.23-31
• /
• 2013

Compact steam boiler is a useful heat exchanger in a space-intensive system. There are some constraints in terms of sizing and designing the space confined in the system which is usually used in vessels. In this study, design considerations for heavy duty heat exchangers of compact steam boilers are presented and evaluated. Especially, evaporator tubes of marine boiler which are exposed to a high temperature environment are considered. Also, extended surface designs with a high temperature are examined. In order to determine the criteria with considerations of both heat transfer rate and pressure drop in the heat exchanger, they are evaluated with major variables, such as the tube diameter, the number of tubes, and the tube length. Finally, the design parameters are estimated as the bare tubes are installed instead of the finned tubes.

• 설비공학논문집
• /
• 제2권2호
• /
• pp.127-136
• /
• 1990

Air-solid bed has been known to be an effective heat transfer augmentation device which could be applied to heat exchangers. In this study, pressure drop and heat transfer characteristics of vertical annular fluidized bed heat exchanger with air flowing through were studied experimentally. The experiments was conducted to calculate overall heat transfer coefficient on fluidized bed heat exchangers immersed single vertical tube and investigate minimum fluidized velocity in fluidized bed of alumina beads and steel balls. The influence of flow direction, particle diameter, the heights of static bed and air mass fluidizing velocity has been examined. The experimental results showed the optimum operating condition and effective static bed height for fluidized bed heat exchangers. For the same power loss, comparisions of heat transfer effect between the fluidized bed heat exchanger and the single phase forced convetion heat exchanger indicate that both miniaturization of heat exchanger and heat transfer augmentation at low flow velocity are possible by application of the air-solid to heat exchangers.

• Nuclear Engineering and Technology
• /
• 제49권8호
• /
• pp.1617-1628
• /
• 2017

In the passive residual heat removal system of a molten salt reactor, one of the residual heat removal methods is to use the thimble-type heat transfer elements of the drain salt tank to remove the residual heat of fuel salts. An experimental loop is designed and built with a single heat transfer element to analyze the heat transfer and flow characteristics. In this research, the influence of the size of a three-layer thimble-type heat transfer element on the heat transfer rate is analyzed. Two methods are used to obtain the heat transfer rate, and a difference of results between methods is approximately 5%. The gas gap width between the thimble and the bayonet has a large effect on the heat transfer rate. As the gas gap width increases from 1.0 mm to 11.0 mm, the heat transfer rate decreases from 5.2 kW to 1.6 kW. In addition, a natural circulation startup process is described in this paper. Finally, flashing natural circulation instability has been observed in this thimble-type heat transfer element.

• 한국의사학회지
• /
• 제14권1호
• /
• pp.153-166
• /
• 2001

Lee Dong-won based on the machanism of internal disease founded on Umhwa and Wonki in discriminating internal injury from external. His general idea of discrimination of internal injury from external could be thought as an reinterpretation of the concept from "Neijing", to Triple heater Wonki and ascending and descending of stomach qi. He distinguished between Yin disease and Yang disease and classified into internal and external injury. "Insufficiency of yang brings about cold syndrome." and "An excess of yang brings about heat syndrome." are considered as external infection, and "Insufficiency of yin brings about heat syndrome." and "An excess of yin brings about cold syndrome." as internal injury.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권1호
• /
• pp.51-57
• /
• 2007

In process of reinforced concrete (RC) box structure. the heat of hydration may cause serious thermal cracking. In order to eliminate hydration heat of mass concrete. this paper reports results of hydration heat control in mass concrete structure using the pulsating heat pipe. There were three RC box molds($1.2{\times}l.8{\times}2.4m^3$) which shows a difference as compared with each other. One was not equipped with pulsating heat pipe. The others were equipped with pulsating heat pipe. All of them were cooled with natural air convection. The pulsating heat pipe was composed of serpentine type copper pipe with 10 turns (outer diameter: 4mm. inner diameter: 2.8mm). The working fluid was R-22 and its charging ratio was 40% by volume. The conditions such as the number of turns. the length and the pitch of the pulsating heat pipe and the size of concrete structure were changed. Based on these experiments, it was confirmed that this construction method using pulsating heat pipe was effective to remove hydration heat of mass concrete structure and thus it was possible to prevent harmful thermal crack and construction Period and costs of concrete structure would be cut down.

• 한방안이비인후피부과학회지
• /
• 제10권1호
• /
• pp.209-246
• /
• 1997

In the literatual study on the Ecthyma, the results were as follows. 1. The pathogenic factors of Ecthyma is divided three parts. One is exogenous pathogenic factors which including the wind evil, wind heat and toxic material produced by wetness evil. Another is endogenous pathogenic factors which including the declination of kidney-yang, impairment of the liver and kidney, the lower classes of yin-fire, accumulation of wetness-heat in the spleen asthenia, impairment of the liver and kidney, wetness-heat of three yang, asthenic heat-syndrome of three yin. The other is pathogenic factors neither endogenous nor exogenous which including the food and living, uncontrol sexual excess, anxiety and angry, injury of skin, injury of insects and animals. 2. Five viscera which was concerned with Ecthyma are liver, spleen and kidney. 3. Frequent region of Ecthyma are S-36(足三里) and C-7(陰交). External Ecthyma was rose to wetness-heat of three yang channel that cured easily. Internal Ecthyma was rose to asthenic heat-syndrome of three yin channel that cured hardly. 4. In the frequency of prescription, the most numerous prescription is Bojungikgitang(補中益氣湯) and the next are Kyukgigo(隔紙膏) and Yukmijihwanghwan(六味地滉丸). 5. In the frequency of medicine, the most medicine is Calomelas(輕粉) which included Hydrargyrum(水銀) and the next are Olibanum(乳香) and Resina Commiphorae Myrrhae(沒藥) which regulating vital energy and pain control medicine used that in order to destroy insects and remove polson. 6. In classification of the medical action, medicine of clearing away summer-heat and heat evil and activating blood circulation to dissipate blood stasis used to be very busy which in order to remove the disorder of vital energy for virulent heat-evil. 7. In classification of four characters, the most part is warm medicine, the next are cold and cool medicine and there is a few that is hot medicine. 8. In classification of five tastes, the most numerous tastes are bitter and acrid, the next are sweet, salty and sour tastes. 9. In classification of virulence of medicine, the most part is non-toxic, the next are weakly and deadly poison. 10. In classification of channel distribution, the most is the medicine that belongs to liver channel, the next are the lung, spleen, stomach and kidney channel.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.29.2-29.2
• /
• 2005

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 하계학술발표대회
• /
• pp.99-99
• /
• 2005

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2004년도 하계학술발표 논문집
• /
• pp.19-19
• /
• 2004

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.1948-1952
• /
• 2007

Heat transfer augmentation based on the process intensification concept in heat exchangers and thermal reactors has received much attention in recent years, mainly due to energy efficiency and environmental considerations. The concept consists of the development of novel apparatuses and techniques that, compared to those commonly used today, are expected to bring dramatic improvements in manufacturing and processing, substantially decreasing equipment size, energy consumption, and ultimately resulting in cheaper, sustainable technologies. The objective of this paper was to investigate the heat transfer characteristics of tubular thermal reactor using static mixing technology. Glycerin and water were used as the test fluids and water was used as the heating source. The results for heat transfer rate were strongly influenced by tube geometry and flow conditions.