• Journal of the Korean Chemical Society
• /
• v.42 no.1
• /
• pp.122-134
• /
• 1998

In this review, we describe the electrochemical properties of spinel-type lithium manganese oxides $(Li_xMn_2O_4)$ and their failure modes encountered in 4 V lithium rechargable cells. The long-term cyclability (reversibility) of spinel electrodes is determined partly by the purity, size and distribution of spinel particles, and also by the microstructure of electrode plates. A proper selection of electrolytes is another important task in cyclability enhancements. In the spinel preparation, impurity formation and cation mixing should be minimized. The carbon content in composite cathodes should also be minimized to the extent where the cell polarization does not bring about adverse effects on cell performances. The binder content should be optimized on the basis of dispersion of component materials and mechanical strength of the plates. Cathodic capacity losses arising from solvent oxidation and spinel dissolution can be mitigated by using electrolytes composed of carbonates and/or fluorine-containing lithium salts. The carbon additives may be selected after a trade-off between the cell polarization in composite cathodes and the solvent oxidation on carbon surface.

• Journal of Plant Biotechnology
• /
• v.42 no.4
• /
• pp.284-289
• /
• 2015

Powdery mildew (Podosphaera xanthii) commonly occurs in cultivated fields of melon (Cucumis melo L.). It inflicts a lot of damages. Therefore, breeding resistant lines is essential. Development of a resistant line by integrating resistance gene takes a long time. In addition, break down of developed resistance by generating new virulent fungus strains increases disease susceptibility. This phenomenon was related to races of powdery mildew. Therefore, it is important to develop a DNA marker to genetically analyze race-specific resistance genes of melon powdery mildew to breed resistant lines. To date, a total of 28 races of Podosphaera xanthii have been reported in the literature. In Japan, 10 races have been reported in the Ibaraki region. We developed a system to characterize the races of Podosphaera xanthii and confirmed eight out of those 10 races in the Ibaraki region. In Korea, only one race has been characterized to date. However, some different races were detected. Through genetic analysis of resistant lines and susceptible lines of powdery mildew, resistance genes of race1 (Pm-X, PXB, and Pm-R 1), race N1 (PXA), race 2 (Pm-w and Pm-R 2), race 3 (Pm-X3), and race 5 (Pm-X5 and Pm-R5) were identified in melon. These related genes of race 1, 3, N1, 5, and race 1, 2, 5 were located at linkage group II and V, respectively. In race 1, resistance gene was located in the linkage group XII. In addition, each race-specific marker related to specific resistance gene was developed. Using race information and race selection system obtained in this study, resistant line can be bred to develop resistant cultivar for several areas. Furthermore, this will make it more easily and economically to breed resistant lines by using selected markers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.5
• /
• pp.601-605
• /
• 2005

Three lines of White Leghorn (WL) chickens (IWJ, IWG and IWC) maintained at Central Avian Research Institute, Izatnagar (UP), were used for chorioallantoic membrane (CAM) and liver tumour (LT) assay. Eleven-day-old embryos of each line were partitioned into three groups and inoculated with 0.2 ml of subgroup A, subgroup C and an equal mixture of subgroup A and C Rous sarcoma virus (RSV). Subgroup virus receptor on the cell surface membrane for subgroup A is coded for by tumour virus a (tva) locus and for subgroup C by tumour virus c (tvc) locus. The random association of the genes at the tva and tvc loci in IWJ and IWC line was assessed and the $x^2$-values for phenotypic classes were found to be significant, indicating the linkage between the tva and tvc loci. The linkage value was estimated to be 0.09 on pooled sex and pooled line basis. On the basis of four subclass tumour phenotypes a 4-allele model was proposed for tva locus having $a^{s1}$, $a^{s2}$, $a^{r1}$ and $a^{r2}$ alleles and the frequencies were calculated as 0.47, 0.13, 0.13 and 0.27 for IWJ line, 0.31, 0.33, 0.14 and 0.22 for IWG line and 0.44, 0.11, 0.21 and 0.24 for IWC line, respectively. Similarly, for tvc locus the frequencies of four alleles i.e. $c^{s1}$, $c^{s2}$, $c^{r1}$ and $c^{r2}$ were calculated as 0.42, 0.20, 0.21 and 0.17 for IWJ line, 0.42, 0.17, 0.27 and 0.14 for IWG line and 0.30, 0.21, 0.16 and 0.33 for IWC line, respectively. The $x^2$-values for all classes of observations were not significant (p>0.05), indicating a good fit to the 4-allele model for the occurrence of 4-subclass tumour phenotypes for tva and tvc loci. On the basis of the 2-allele model both tva and tvc locus carries three genotypes each. But, on the basis of the 4-allele model tva and tvc locus carries 10 genotypes each. The interaction between A-resistance and C-resistance (both CAM and LT death) was ascertained by taking the 10 genotypes of tva locus and 3 genotypes of tvc locus by pooling the lines and partitioning the observations into 3 classes. The $x^2$-values for the genotypic classes of CAM (-) LT (+) and CAM (-) LT (-) phenotypes to mixed virus (A+C) infection were found to be highly significant (p<0.01), indicating increased resistance, which indicates the joint segregation of $a^r$ and $c^r$ genes, suggesting the existence of close linkage between the tva and tvc loci. Therefore, an indirect selection approach using subgroup C viruses can be employed to generate stocks resistant to subgroup A LLV, obviating contamination with the most common agent causing LL in field condition.

• Korean Journal of Food Science and Technology
• /
• v.21 no.1
• /
• pp.100-108
• /
• 1989

A study relating the sugar contents of radishes to the final titratable acidities(TA) after complete fermentation was conducted to get an idea of selecting radish varieties to improve storage stabilities of fermented pickled radish cubes. Thirty six varieties of spring-sowing and thirty four varieties of autumn-sowing radishes were chosen to ferment to measure their final TA in relation to their sugar contents. The sugar contents of spring-sowing radishes were in the range from 2.40 to $3.71^{\circ}\;Brix$ and the final TA ranged from 1.15 to 1.65%. The sugar contents of autumn-sowing radishes were in the range from 4.00 to $5.53^{\circ}\;Brix$ and the final TA ranged from 1.45 to 2.00%. The final TA obtained after complete fermentation were found to be directly proportional to the sugar contents of radishes, showing that TA equals to 0.29x+0.4428, where x is sugar content of radish. From the equation, since a properly aged fermented pickled vegetable is believed to have a TA range from 0.6 to 0.8%, a radish of a sugar content ranging from 0.6 to $1.3^{\circ}\;Brix$ will make fermented pickled radish cubes which will not be overacidified during the prolonged storage period.

• Journal of Embryo Transfer
• /
• v.30 no.2
• /
• pp.73-82
• /
• 2015

This study was designed to evaluate the possibility of increase through dairy female offspring's ratio by transfer of pre-selected transferrable blastocyst that was produced by pre-selected X-bearing semen with OPU derived oocytes. Elite dairy female cow is demanded strongly compared with male, the so called, farmer wants to produce only an elite female dairy offspring as a candidate female dairy cow for producing milk. In our study, we selected 2 elite dairy bull semen from National Agricultural Cooperative Federation to pre-select X-bearing semen and 5 elite dairy female cows as donor for collecting of OPU derived oocytes. OPU derived embryo production system was carried out an aspiration of immature oocytes from 5 donor cows 2 times per week, total 200 times for 2 to 7 months by an ultrasonographic guided follicular aspiration system and then produced in vitro-produced blastocysts by in vitro maturation, fertilization and culture. Dairy donor semen selected H-319, 320 bull in National Agricultural Cooperative federation was sorted X-bearing semen by flow-cytometer and frozen for using IVF with OPU derived oocytes. Donor cows were selected 5 elite dairy cows from Gyeongju Dairy Cow Community and then disease tests such as 4 kinds of disease before selecting was checked. Oocyte proportion of grade 1 to 3 from total collected oocytes was significantly lower in donor A and B than those in donor C, D and E (82.16 and 70.03% vs. 90.0, 91.78 and 93.57%), respectively (p<0.05). However, number of oocytes per session in donor A, C and E was significantly higher than those in donor B and D ($7.77{\pm}3.26$, $5.85{\pm}2.10$ and $7.03{\pm}2.14$ vs. $4.68{\pm}2.61$ and $5.21{\pm}1.97$ oocytes), but donor A was significantly higher than donor C (p<0.05). Development to blastocyst in donor B, C and E was significantly higher than those in donor A and D (31.0, 25.0 and 25.0% vs. 14.3 and 4.5%), but donor A was not different in donor C and E (p<0.05). Nine out of 10 blastocysts (90.0%) derived from OPU blastocysts were confirmed male embryos that was induced with Y-bearing semen to confirm sex ratio only. Total 96 blastocysts derived from female bearing semen were transferred into synchronized recipients and then confirmed 42 recipients (43.8%) pregnancy rate, 36 offspring (37.5%) and 91.7% female sex ratio (33 female vs. 3 male offspring). Taken together all data, elite dairy female offspring could be produced effectively by in vitro production system between pre-selected x-bearing semen and OPU derived oocytes that would be influential breeder in the breeding of dairy farm to increase effectively elite dairy offspring ratio as well as net income in the dairy farmer.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.8
• /
• pp.449-455
• /
• 2017

Process input data including material and energy, process output data including product, co-product and its environmental emissions of the reference and target processes were collected and analyzed to evaluate the process performance. Environmentally problematic input/environmental emissions of the manufacturing processes were identified using these data. Significant process inputs contributing to each of the environmental emissions were identified using multiple regression analysis between the process inputs and environmental emissions. Optimum combination of the end-of-pipe technologies for treating the environmental emissions considering economic aspects was made using the linear programming technique. The cement manufacturing processes in Korea and the EU producing same type of cement were chosen for the case study. Environmentally problematic input/environmental emissions of the domestic cement manufacturing processes include coal, dust, and $SO_x$. Multiple regression analysis among the process inputs and environmental emissions revealed that $CO_2$ emission was influenced most by coal, followed by the input raw materials and gypsum. $SO_x$ emission was influenced by coal, and dust emission by gypsum followed by raw material. Optimization of the end-of-pipe technologies treating dust showed that a combination of 100% of the electro precipitator and 2.4% of the fiber filter gives the lowest cost. The $SO_x$ case showed that a combination of 100% of the dry addition process and 25.88% of the wet scrubber gives the lowest cost. Salient feature of this research is that it proposed a method for identifying environmentally problematic input/environmental emissions of the manufacturing processes, in particular, cement manufacturing process. Another feature is that it showed a method for selecting the optimum combination of the end-of-pipe treatment technologies.

• Korean Journal of Poultry Science
• /
• v.15 no.3
• /
• pp.211-218
• /
• 1988

Data on egg number from time of first lay to 71 week of age were obtained from samples of single comb white leghorn breeder and brown layer breeder populations which were raised at manny breeding Co. These data were used to estimate the heritabilities of age at sexual maturity, early egg number, residual egg number and annual egg number. Also, the genetic correlation coefficients between these traits were estimated and selection efficiencies of each segment in early part record were estimated by use of the heritabilities and generic correlations. The estimated heritabilities and standard errors in two lines(W and B) were $0.30\pm0.07$ and $0.33\pm0.08$ at early records, $0.19\pm0.06$ and $0.18\pm$0.05 at residual records and $0.37\pm0.09$ and $0.49\pm0.10$ at time of first lay. Those at annual records were $0.24\pm0.06$ equally. The estimated correlation coefficients and standard errors between early record and annual record were $0.76\pm0.08$ and $0.77\pm0.07$. Those between early record and residual record were $0.46\pm0.15$ and $0.39\pm0.16$ respectively. At improving annual egg production per year, selection based on early part record(SM to 40 week of age) would be 69% more efficient than on annual record in line W and 80% more efficient than on annual record in line B. But, if it were considered that egg weight decreased due to sexual maturity and cost for data collection, use of selected segment from 35~40week of age in line W and from 31~40 week of age in line B would be desired in spite of a. small loss in relative selection efficiency. The generation interval would not be shortened.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.2
• /
• pp.77-81
• /
• 1997

For the early selection of heat-tolerant clones, the true potato seeds of 750 clones were obtained by several cross combinations : $CIP\;575015\;{\times}\;katahdin,\;CIP\;575015\;{\times}\;B6603-6,\;84\;I\;35-4\;{\times}\;katahdin,\;CIP\;575015\;{\times}\;NookSack,\;and\;CIP575015\;{\times}\;Superior.$ The ratios of in vitro tuberization at 3$0^{\circ}C$ were decreased by 43% in all cross combinations compared with at 2$0^{\circ}C$. In particular, tuberization rate of $CIP575015\;{\times}\;katahdin$ cross at 3$0^{\circ}C$ was only 21%. On the other hand, the rate of tuberization of $CIP575015\;{\times}B6603-6$ cross was 58 % at 3$0^{\circ}C$, so this cross combination was thought to be good heat-tolerant clone. To screen the heat-tolerant clones in lower land during high temperature period, microtubers were cultivated in Kangnung, and the characters of tubers and productivity were examined. Among screened clones, one clone at 2$0^{\circ}C$ and three clones at 3$0^{\circ}C$ were shown to be heat-tolerant. The yield of 89ML75-8 was 88% more than that of Superior, and dry weight rate of 89 ML64-11 was 18.8%. Therefore, 89ML64-11 clone was considered as a good cultivar for processing.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.10 no.1
• /
• pp.153-165
• /
• 2006

Objectives: The purpose of this study is to obtain basic data about medical consumer's behavior by the examination of the demographic characteristics, experience of medical service and attitude toward traditional medicine based on the outpatients of oriental medicine clinic. Methods: The participants of this study are outpatients in 5 oriental medicine clinics located in the metropolitan area. The resources were collected from the self-administration questionnaire survey. 202 samples were collected. The SPSS 13.0 for windows was used for statistical analysis: One-way ANOVA, $x^2-test$, correlation analysis were used to verify the results. Results & Conclusions: The results from this study are as follow. 1, The group which are in low-ade educational background and income selected traditional medicine for the promotion of health. In this group, traditional medicine was consumed with higher purchasing frequency and more satisfaction and considered more safe and effective, on the other hand western medicine was consumed with lower frequency. People In this group highly evaluated the kindness of oriental medicine doctor and more interested in health. 2. The group which selected traditional medicine for the treatment of disease more frequently consumed traditional medicine. People In this group highly evaluated the efficacy and economical efficiency of traditional me야cine and the kindness of oriental medicine doctor. 3. The group which selected traditional medicine for the management of disease iess : frequently consumed western medicine. People In this group highly evaluated the efficacy of traditional medicine. 4. Purchasing frequency on traditional medicine was higher in the 50year above group than $30{\sim}39year$, 29year and below group.(P<0.1) 5. Purchasing frequencyy on traditional medicine slightly correlated with the satisfaction of traditional medicine and the kindness of oriental medicine doctor. The satisfaction of traditional medicine strongly correlated with the kindness of oriental medicine doctor. 6. The efficacy of traditional medicine and the kindness of oriental medicine doctor were highly evaluated in the $10{\sim}19times$ experience group and 20times above experience group than $1{\sim}4times$ experience group.

• Journal of KIISE:Software and Applications
• /
• v.30 no.3_4
• /
• pp.278-284
• /
• 2003

Speech act is the speaker's intentions indicated through utterances. It is important for understanding natural language dialogues and generating responses. This paper proposes the method of two stage that increases the performance of the korean speech act decision. The first stage is to select features from the part of speech results in sentence and from the context that uses previous speech acts. We use x$^2$ statistics(CHI) for selecting features that have showed high performance in text categorization. The second stage is to determine speech act with selected features and Neural Network. The proposed method shows the possibility of automatic speech act decision using only POS results, makes good performance by using the higher informative features and speed up by decreasing the number of features. We tested the system using our proposed method in Korean dialogue corpus transcribed from recording in real fields, and this corpus consists of 10,285 utterances and 17 speech acts. We trained it with 8,349 utterances and have test it with 1,936 utterances, obtained the correct speech act for 1,709 utterances(88.3%). This result is about 8% higher accuracy than without selecting features.