• Journal of Korean Institute of Industrial Engineers
• /
• v.17 no.1
• /
• pp.117-126
• /
• 1991

When {X(t), t ${\geq}$ 0} is a Markov process representing time-varying system states, we develop efficient bounding methods for some time-dependent performance measures. We use the discretization technique for stochastically monotone Markov processes and a combination of discretization and uniformization for Markov processes with the stochastic convexity(concavity) property. Sufficient conditions for stochastic monotonocity and stochastic convexity of a Markov process are also mentioned. A simple example is given to demonstrate the validity of the bounding methods.

• Korean Journal of Materials Research
• /
• v.9 no.8
• /
• pp.849-853
• /
• 1999

In the study, superconducting properties of $Bi_2$-x(sub)$LSr_2$Ca(sub)1+x(sub)$LCu_2$O(sub)8+d (x(sub)L=0, 0.05, 0.1, 0.2) films prepared by the LPE method was investigated. The peak decompositions of Sr3d and Ca2p XPS spectra, together with the EPMA results, elucidated the occupancies of Bi, Sr and Ca atoms on the SrO- and Ca-layers. The lattice parameter c monotonically increased with increasing x(sub)L for $0\leq$x(sub)L$\leq$0.2. The superconducting critical temperature T(sub)c showed a maximum value around x(sub)L=0.1. The x(sub)L dependence of the superconducting critical temperature T(sub)c and the lattice parameter c are explained by the changes of the excess oxygens in the BiO-layer. Since distribution and deficiency of the atoms in SrO-layer have influenced on superconducting properties and crystal structure.

• Parasites, Hosts and Diseases
• /
• v.25 no.2
• /
• pp.210-212
• /
• 1987

한국산 모기에 대한 조사연구사업의 일환으로 1387년 6월 경기도 남양주군 광릉에 위치한 임업시험장 일대에서 야외채집을 실시한 결과 미기록종 Aedes bekkui(베꾸숲모기)를 채집하였기에 이를 보고한다. 성충의 특징은 기문하구(subspiracular area)에 작을 강모가 없는 점이고, 유충의 특징은 머리털 4-C와 6-C의 간격이 좁고 5,6-C의 크기와 모양은 서로 대등하며 6,7-C의 간격은 5,6-C의 간격보다 2배이상 넓다는 점이다. 또 꼬리틸 3-X는 단모로 되어 있고 2-X보다 상당히 길다. Tanaka의 검색표에 따르면 Aedes bekkui 성충의 특징은 아속 Edwardsaedes와 일치되지만 유충은 아속 Aedimorphus에 일치된다. 이는 Belkin이 처음 아속 Edwardsaedes를 확립할 때 유일하게 Aedes imprimens를 단모식 표본종(monotypic species)으로 이용하여 그 특징 열거에 있어 너무 단조로 왔기 때문이며 또한 일본에서 A. imprimens가 A. bekkui로 판명되기까지 자충의 특징만이 기록되어 왔기 때문이다. 그러므로 과거 한국에서 보고된 A. imprimens도 일본의 경우와 같이 A. bekkui의 오식종이었을 것으로 생각된다.

• Journal of Conservation Science
• /
• v.34 no.2
• /
• pp.87-96
• /
• 2018

This study analyzed the influence of folding time on the forge welded bar and hammer scale produced using the traditional refining and forge welding reproduction experiment. In the case of the forge welded bar, increasing the forging time decreased the percentage of impurities and porosity from 26.09% to 1.8%. Additionally, the hardness increased by an average of 36.88 HV. In other words, the microstructure gradually became more precise. For the hammer scale, the amount of T Fe increased with forging time. X-ray diffraction analysis revealed the presence of quartz, fayalite, $w{\ddot{u}stite$, and magnetite. The amount of quartz decreased as the forging time increased. In addition, as the forging time increased, the granular $w{\ddot{u}stite$ changed into a cohesive, long, white band. The results provide information on the characteristics of the forge welded bar and hammer scale produced in the refining and forging process. This information can be used as technical data for ancient steel making processes as well as for future technological systems.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.4
• /
• pp.281-288
• /
• 1996

This study has been investigated the influence of solid solution treatment on the microstructure of Mg-6Al-xZn(x=0,1,2) alloys fabricated by squeeze casting process. The products having clean surface and fine microstructure are fabricated by adopting the liquid metal forging method. The microstructures of as-fabricated state show ${\beta}(Mg_{17}Al_{12})$ precipitates between the dendrite boundaries. It is found that the hardness of the alloys is increased with increasing amount of zinc due to the solid solution hardening effect of zinc. In the changes of microstructure upon solid solution treatment time at $405^{\circ}C$, ${\beta}$ phases are dissolved in ${\alpha}$ matrix up to 1hr and the microstructure are coarsened rapidly after 2hrs. The microhardness are decreased rapidly until 1hr of solution treatment time and then stabilized. From the above results, it is concluded that the optimum solid solution treatment condition for Mg-6Al-xZn alloys is at $405^{\circ}C$ for 1hr. The solution treatment time is greatly reduced comparing to conventional casting(at $385{\sim}418^{\circ}C$ for 10~14hrs) due to the formation of the super-saturated solid solution by liquid metal forging.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.5
• /
• pp.481-488
• /
• 2013

Nitric oxide ($NO_x$) formation characteristics in non-premixed diffusion flames of methane fuels have been investigated experimentally and numerically by adding 10% ammonia to the fuel stream, according to the variation of the oxygen ratio in the oxidizer with oxygen/carbon dioxide and oxygen/nitrogen mixtures. In an experiment of coflow jet flames, in the case of an oxidizer with oxygen/carbon dioxide, the $NO_x$ emission increased slightly as the oxygen ratio increased. On the other hand, in case of an oxygen/nitrogen oxidizer, the $NO_x$ emission was the maximum at an oxygen ratio of 0.7, and it exhibited non-monotonic behavior according to the oxygen ratio. Consequently, the $NO_x$ emission in the condition of oxyfuel combustion was overestimated as compared to that in the condition of conventional air combustion. To elucidate the characteristics of $NO_x$ formation for various oxidizer compositions, 1D and 2D numerical simulations have been conducted by adopting one kinetic mechanism. The result of 2D simulation for an oxidizer with oxygen/nitrogen well predicted the trend of experimentally measured $NO_x$ emissions.

• The Journal of the Korea Contents Association
• /
• v.6 no.4
• /
• pp.63-68
• /
• 2006

For the almost co티am convergent series $S_n$ of independent random variables, by investigating the limiting behavior of the tail series, $T_n=S-S_{n-1}=\sum_{i=n}^{\infty}X_i$, the rate of convergence of the series $S_n$ to a random variable S is studied in this paper. More specifically, the equivalence between the tail series weak law of large numbers and a limit law is established for a quasi-monotone decreasing sequence, thereby extending a result of Previous work to the wider class of the norming constants.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.11a
• /
• pp.217-219
• /
• 2020

기존 초해상화 방법들은 주로 자연 영상에 대해서는 많이 다뤄져 왔지만 단조$로운 배경과 복잡한 문양, 질감을 가진 문화재 영상에 대해 적용한 사례가 많지 않다. 또한 대부분의 초해상화 기술은 현재 딥러닝을 적용하고 있지만 복잡도와 구현 난이도에서 상대적으로 수월한 비딥러닝 방법을 사용하여 4 배와 8 배로 초해상화를 실현하는 연구 또한 많지 않다. 본 연구에서는 선형 매핑을 이용한 SI (Super Interpolation)을 기반으로 하여 2 배까지 초해상화에 특화된 기존 연구를 문화재 영상에 대하여 4 배 및 8 배로 초해상화 하였다. 간단한 윤곽선 방향 분석 및 선형 매핑으로 4 배 초해상화에서는 PSNR 값을 0.44dB 가량 개선하였으며, 8 배 초해상화에서는 PSNR 값을 0.31dB 가량 개선하였다. 또한 결과 영상에서도 단순 보간법인 Bicubic Interpolation 보다 더욱 선명하고 질감을 잘 표현하는 것을 알 수 있다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.160-164
• /
• 2007

In the steel industry, there is a need to produce large forged parts for the automobile industries, the flight and shipping industries ad military industries. In the steel-industry application, a cogging technique for cast ingots is required, because the major parts are needed as one large body in order to obtain higher quality. Therefore, cogging process is the primary step in manufacturing of practically large open-die forging. In the cogging process, internal voids have to be eliminated as defects, The present work is concerned with the elimination of the internal voids in large ingots so as obtain sound products. In this study, hot compression tests were carried out to obtain the flow stress of cast microstructure at different temperature and strain rates. The FEM analysis are performed to investigate the overlap defect of cast ingots during cogging stage. The measure flow stress data were used to simulate the cogging process of cast ingot using the practical material properties. Also the analysis of void closure are performed by using the $DEFORM^{TM}$-3D. The calculated results of void closure behavior are compared with the measured results before and after cogging, which are scanned by the X-ray scanner. From this result, the criteria for deformation amounts effect on the void closure can be investigated by the comparison of practical experiment and numerical analysis.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.1 s.74
• /
• pp.33-43
• /
• 2005

This paper presents the test results and evaluations for the energy dissipation capacity and compressive performance of light-weight hybrid panels. A total of 26 full-scale specimens of light-weight hybrid panels were tested. The parameters include the presence of light-weight foamed mortar, the specific gravity of light-weight foamed mortar (0.6, 0.8, 1.0, 1.2), the finishing materials (light-weight foamed mortar, OSB [Oriented Strand Board], gypsum board), the shape of bracing (x, ~), and the size of panels (1P-900 mm 2,400 mm, 2P-1,800 mm 2,400 mm). The results of the cyclic tests are somewhat different from those of monotonic tests, due to the different specific gravity of light-weight foamed mortar. It was found from the compressive tests that the ultimate strength and initial stiffness are increased by means of light-weight foamed mortar (2~2.5 times in ultimate strength and 2~3 times in initial stiffness).